Premiere Elements

There are often questions regarding the process of Rendering, for smoothest playback of the Timeline. The need to Render, for the smoothest possible playback is indicated by colored bars, just below the Timeline Ruler - red bars/lines, green bars/lines and in PrPro, yellow bars/lines. With the exception of the yellow bars/lines, it's the same for either PrPro, or PrE. This ARTICLE goes into more detail. Though Todd and Steve created it for PrPro, with the exception of the yellow bars/lines, it's the same in either program.Hope that this explains Rendering, how and why it's useful and how to tell if your source footage needs it, for smoothest playback.Depending on what one has in their Timeline, what they are doing with it, and how critically they need to see it in playback, one might never really need to Render, or they might need to Render small segments many, many times, as they make adjustments.Good luck, and thanks to Todd and Steve! Hunt

I have Premiere Elements 11, which, according to what I have read, supports editing 1080p50 (or 60 in NTSC). When I create a project it is not showing up in the list of available presets. See the available list below:Checking the installation directories, I can see that the preset is actually installed on the computer. Screenshot below:Comparing the two lists, all of the presets are available, except the 1080p 50. The preset has GUID 088bb726-9823-467e-b3b7-26f3703d4cf1, which is included in the Adobe Editing Modes.xml as EditingMode24, enabled on all platforms. I was going to attach both the preset and the editing modes xml to this question, but there doesn't seem to be a way to do that. They are both reasonably large files, so I am posting below only the definition of EditingMode24. I can post the contents of the preset as well, if required. I am on Windows 7 64bit.<EditingMode24 Version="2"><EditingMode.SupportedPlatforms Version="1"><EditingMode.SupportedPlatformCoun

Have you gotten a Media Offline message? Do your Assets show this screen?Chances are that when you last did a Save of your Project, the Path to those Assets no longer exists. Has the Path changed in any way? Have you Moved, Renamed, or Deleted any of the Assets? Is there an external, or networked HDD in the mix anywhere, that might now have a different drive letter? The Path in the XML code of the PRPROJ/PREL file links to the Assets is absolute - it must match from the drive letter, to the folder structure, to the file name, and match 100%. Change one thing, and the link via that Path is broken, and must be restored.When you first Opened your Project, did PrPro/PrE ask, "Where is file ______.avi?" Were you able to use the Find function, to re-establish the link to that, and any other missing files?Now, most people will ask, “how do I relink my Assets easily and quickly?” The answer to this question is "it depends."First, it depends on whether you first accepted to Offline the media, a

I have been using iMovie and would like to switch to Premiere Elements.  What is the best way to transfer videos from iMovie to Premiere?

Hello,I have created a slide show in Photoshop Elements 10. I clicked on output to send it to Premiere Elements 10 because my pictures were blurry/pixilated when I viewed them in full screen preview, but they were not blurry/pixilated in the screen above the timeline. Once I had my slide show in Premiere, I finished making edits, created a DVD menu for it and then went to burn it to a DVD. None of the pictures were blurry in the screen above the sceneline. When I went to burn it to a DVD, I unchecked the box "fit to available space" and slid the quality slider all the way to the right. Most of the pictures were fine, but some are still blurry/pixilated.Why is this happening and how can I correct it? Please provide detailed steps as I have only been using Premiere for about 2 weeks.

Hi, I was wondering if it is possible to apply an "echo" effect to a clip in Premiere Elements 10. I am trying to make the audio of a clip sound like it is echoing. I have tried adding audio effects to clips by dragging it onto the screen or clicking "apply" but nothing happens. However, the audio effects do seem to work on narration. I read a forum similar to this one but I didn't really understand all the terms as I am a beginner.Thanks!

Hello,I would like to know the differences between Adobe Premiere Elements 11 and Adobe Premiere Pro CS6 in relation to video editing. If someone can point me to any resource on the web like a comparision chart of features, differences etc that would be perfect. I understand the Premiere Pro CS6 would have a lot of extra bell and whistles, special effects etc... but what I would like to know if there is a difference in terms of the the quality of the Final Product?Our needs for a video editor are very simple. We need to create simple titles and text overlay to show the name of the speaker and/or topic. A few times we the audio was not recorded on the video camcera but we do have the audio recorded for the event on a separate audio recorder in .WAV format. So we would like to sync up the video with this audio. Can this be done in Adobe Premiere Elements 11? And in cases where the audio was recorded with video, we would like to increase the gain/volume for the audio or clean up some hum

Users often ask how to do screen-caps, to show what is happening with their program. Below are possible workflows for creating the screen-caps, and then there are instructions on how to "attach" the screen-caps to a Reply in the Adobe Forums, but only if one is accessing them via a Web browser - with e-mail access, you cannot attach a screen-cap, or other image file. There are first several utilities that will help you do this, but I will outline the steps using Adobe Photoshop and the Windows Clipboard. One can substitute their image editing program of choice, such as Photoshop Elements, PaintShop Pro, or other.Windows has a Clipboard feature, and one can use the Print Screen key (often seen as Prt Sc, etc., and depending on their computer, might have to also use a modifier key, such as the Ctrl key).First, set up your program, so that the necessary items are shown. This might be zooming in on the Timeline, even expanding it vertically, moving the CTI (Current Time Indicator with the

A BSOD is a major problem, and is very often a sign of hardware issues. The main causes are:Heat buildup - in the CPU, or the HDD'sRAM - bad, or going badPSU - going bad, or improperly connectedMoBo - going badThis ARTICLE will link to tools that will help you track those elements, and possibly show the bad element, or potentially bad element.I would also change Reboot on Error, to OFF, so that you can write down the report on the BSOD. There might be something in that load of "abstract code" that will be helpful, but maybe not. Also, when one reboots after a BSOD, Windows will usually yield an error message to the effect of "Windows has recovered from a serious problem... " and will often help you trace the issue. Also, this ARTICLE will give you tips for finding clues as to what was happening, just before the BSOD.This ARTICLE will give one tips on setting up their computer for an editing session.This ARTICLE, though directed at PrPro, will be useful for troubleshooting.If nothing el

The video you see on GoPro's website and in their in-store displays is gorgeous - bright, crisp, super vibrant. The video my son has actually been getting with his GoPro Hero2? Decidedly less exciting. It's definitely sharp and nice HD quality, but my complaint is that it almost a desaturated look, with the colors muted and a little washed out.Given the differences between GoPro website footage and our footage, I'm guessing their website and in-store display video has had some liberal video editing applied, which is fine, except... I can't figure out how to get the same results! If it was a picture and I was using Lightroom, I could probably get it pretty close, but I can't seem to get anywhere close to what I'd like to see using the PRE Image Controls (brightness, contrast, saturation). The image controls seem kind of limited in what they do. Brightness seems to wash everything out instead of just increasing the highlights. Contrast... I don't know what the heck it's doing - moving it

Hi Everyone,I really need your help in converting from the ".prel" file to an mP4 file in Adobe Premier Elements 9. I am new to this program, so I learned how to edit the videos but don't know how to do this part.How do I do this? When I open my project file, the "File>Export" button isn't highlighted for me to select it. Thanks in advance for your help!Jennifer

In an article on the PrPro forum, Dan Isaacs offered some tips on workflow for editing Camtasia, or Camstudio footage. Some of the steps involve using other programs, both freeware and from Adobe, but might be of use, should one need to do the work on the Techsmith CODEC footage in Premiere.LINK to article.Hunt

There are many things that can be going on with one's system, and even a brand new system (possibly more likely with a new system?). Neale has assembled a checklist that one should explore first:Work through these basics to see if it cures your problems.Install all Windows Updates.Install latest version of Apple QuickTime (v7.6.9 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.Install most recent graphics and sound drivers from the manufacturer's web sites. Install PRE9 v9.0.1 update, same for PrE 10, or later, or any patches for your version of PrE - check Adobe's site.Delete BadDrivers.txt (in Windows 7 this is likely at C:\ProgramData\Adobe\Premiere Elements\9.0\BadDrivers.txt)  Note: location will be slightly different for each version of PrERun Disk Cleanup.*Run Defragmenter.Reboot your PC.Temporarily disable any anti-virus realtime scanning.Check your HDD's free-space. PrE needs about 20 - 30GB, just to run, and when editing, needs about double

Wil Renczes, from Adobe, just posted a great outline of what happens with Conforming and Indexing of files on Import. He was replying in the PrPro forum, but you can substitute PrE for PrPro in his post, as they are the same here. He also addresses why/how Conforming can not take, and the program will do this every time that the Project is opened, though the processes have already taken place before.Wil writes:PPro generates two potential sidecar files for audio - PEK and CFA files.  The PEK file is simply a quick data pass of the audio data that allows the app to draw waveforms (ie it should be pretty quick) - the CFA files are required if the file source is either too slow to decode the audio in realtime (like some MPEG long GOP, for instance), or if there's a mismatch in the sample rate depth.  The idea is that the conform files will match your sequence's audio bitrate settings so that the app can play & mix audio in realtime. How does PPro track these additional files

Hi there - I have just purchased Adobe Premiere Elements 10 and I am trying to add subtitles to some video clips that I have on file.  The main problem that I am coming up against is the templates used for Titles - there doesn't appear to be a plain one, the one that interests me is the Fun Lower Third but I don't want the wave on the clip - just the text.  Is there any way I can edit the wave out or am I going about this in completely the wrong way? I would be grateful for any help you guys could offer me.

I've managed to add a Transition Effect to my timeline and I can't seem to add it to several spots in the timeline.  I'm a complete Noob to Effects.  What am I not doing that I should be doing?  I've captured video and had to stop it several times, then start capture again.  There appear to be markers on the video clips that I can't attach an effect to.  I've uploaded an image so you can see my issue in detail.See the red circles?  Those markers where the spilts took place, seem to by my problem.  Any help would be appreciated.  I'm trying to attach a simple Cross Dissolve transition to the splits.  I can't attach one to the right of the split, but not centered.  Any help I can get, would be appreciated.(edit)I've managed to find a work around to the problem I'm having.  Apparently, the clips that I have split, were over lapping a bit.  that's why I couldn't attach an effect to the clip.  Still couldn't center the effect

I'm trying to learn my new Premiere Elements 9. I am a simple man, with simple needs. I like to just do a simple fade transition between video clips. There is no "fade" option on the transitions for PE9, I have tried "cross disolve" and "non-additive disolve", and they are freaking wierd. The one that comes the closest is cross-dissolve, It fades out the first clip fine, but the follow on clip starts with an awkward momentary freeze frame, which is not acceptable.Any thoughts?Clem

How on earth do I simply make the video loop so the video will keep continuing to play?? I can't seem to find this anywhere, and it's probably just a simple setting.. Someone please help! Thanks in advance!Megan

I am using Premiere Elements 9 and I am wondering how to export my video to .mp4 format without losing the resolution? (I don't mean .mpg)According to: http://kb2.adobe.com/cps/862/cpsid_86248.html, I should be able to but no luck here. Thanks in advance!

MJPEG (Motion JPEG) compression has been around for quite a while, but there has been a resurgence recently, when Nikon and a few others began shooting motion with their DSLR and other still cameras.Some systems have MJPEG CODEC’s installed already, and some NLE programs also include them with installation. Many camera mfgrs. will include one (often tweaked to their specs.) on their utilities disc. One might be installing it along with the driver for the camera, or perhaps with the installation of the utilities on that disc. The latter is becoming more popular with camera mfgrs., but a separate installation for the particular CODEC would be a better solution. That seems to be falling out of favor, amongst camera mfgrs. though.If one is getting the “Unsupported Format/CODEC” message, it could well be that their system does not have an MJPEG CODEC installed, or the version that they do have is not matched to the one used by their camera, or it could be that their NLE (Non Linear Editor)

I'm trying to export (into a file, ultimately to a disc) a one-minute extract of a 10-minute video in my timeline.  In earlier versions of PE i simply went to File>export and picked one of several options (movie etc).  In PE 10 (which I'm using on the Mac) the Export option is greyed out.Any idea how I can activate it?Thanks.

Hi,I experience very big file size difference rendering to avi or mp4.I always believed avi files would be smaller than mp4 my adobe premiere 10  gives other result. Am I doing something wrong here? And what are the pros and cons to avi or mp4?Thanks for replying,Koen

Ann Bens, on the CS4 forum, posted this LINK to a possible solution for working with MOD & TOD files. Might be of use, if you have a JVC (could work with some other, similar cameras) and want to work with these files in any flavor of Premiere. As I do not shoot to MOD, or TOD, I have not tried it, and cannot vouch for how well it works.Good luck,Hunt

Hi,I believe that I am getting closer to upgrading my video equipment.  A number of years ago when I was getting started, I had a smallexposure to Adobe Premiere 5.5.  Adobe Premiere 6 came out shortley after.  I was about to learn iMovie at the time, andhad been told that if I learn imovie, I will have to unlearn things when I go to a more powerful program.  I was also told that I will reachthe limits of iMovie and will want to upgrade anyway.  Also, I was told that I will find that I may find that something that took 10 minutes to ddo in iMovie may only take a minute in a more powerful program.  Taking this advice, I bypassed iMovie and went to Adobe Premiere.  There was a bigger learning curve, but it was worth it to me.I actually decided to use Premiere after attending a Final Cut Pro Users group meeting in Los Angeles where someone from Adobehad come to demo it for the group.  Since I have been working in MiniDV since, combined with budget,

CODEC. That term is used a lot, and is often misunderstood. What is it, and why should I care? Well, at the very basic level, a CODEC is a “device,” that is most often a two-way conversion to either encode, or decode a data stream. For a complete discussion on CODEC’s, please see this Wiki-pedia entry.In video editing, we use these going both ways. 1.) They allow us to playback an AV file.2.) They allow us to edit an AV file.3.) They also allow us to encode, for delivery, an AV file. They are often .dll (Dynamic Link Libraries), or similar, and are usually installed to our computer as both a file, and as a Registry entry, defining the link to that file, the usage of that file and perhaps linking it to another program on our computer, such as an NLE (Non Linear Editor).Going back to 1.) and 2.), let’s look a bit more closely. Being able to do 1.) does not insure that we can do 2.). Playback of an AV file on our computer is very different than editing that same file. Having the necessary