Questions

disclaimer: I am no expert on this subject, this is a school projectI've been working on a video for 3 months now and it is due tomorrow, I am unsure if I will have it rendered by then at this rate.I decided to do a simple test render (half of 1080p, 3 mbps, H.264) so I could point out any mistakes and fix them before I took on the final render, the estimated time went from 3 hours to 8, so I decided to check over the video within AE for any taxing effects. I removed a fractal noise background animation because it was causing the ram preview to be slow while I was making the video but other than that I decided everything else was essential to the video. So I decided to do the final render you can see the settings in the picture (but i can provide more info if needed) the video is 11m 30s at 1080p etc. I started the render it at first it said it would take 56 hours, but 10 min later it said it would take 6 hours. So i was satisfied with the amount, and let it be. it rendered for about 2

Hey guys,  I would like to render 4K files , as a MXF op -atom- format and codec. but adobe encoder gives me only the MXF op 1a option which is not good for me because it is not 'native' and requires a third party App to Preview it.  anyone heard of some way to do it Via Adobe Apps or others..    thanks

We have a project that is 5 1920x1080 screens being projected. The client wants one large file at 9600x1080. Is this possible?

Hello,I have discovered that H.264 files rendered out in AME 2017 are nearly 50% lower bitrate than those rendered out in AME 2015 and 2014.  This is a problem as I need to utilize the previous version of AME for a project and have matching bitrates.Does anybody have any advice or is anyone else experiencing this same situation?Note: I am comparing the preset "Match Source - Medium bitrate" at 720p with my source file being 1080p.Note 2: After further testing, in AME 2015, I have to set the "Target bitrate" to 1.8 mbps to match the setting of 3 mbps in AME 2017.Thank you and Blessings,Steven Dunn

Hi all,Very confused at the moment with a render that I'm trying to create from After Effects.I have a project in After Effects with a comp of 5 seconds flat and am rendering with Media Encoder.  When I render my mac says the file is 5 seconds but then I upload it to our system it says 5 seconds 5 milliseconds.  I have since downloaded MediaInfo and this states the files are 5 seconds 5 milliseconds.Due to the system I'm uploading it too the file needs to be 5 seconds FLAT!Can't anyone help me fix this or understand why Media Encoder is doing this?!Thank you in advance!

Hi, Im noticing that everytime I download my Adobe Media Encoder settings from the cloud I lose all my custom preset group folders. I then have to manually move each preset back into new folders I have to create each time. Its quite unproductive.I would expect that when you upload your settings it would include all your custom folders you make.Its easy to replicate. Just make a custom folder, drag a few presets into it. Then from the AME menu select "Sync settings now" and select "Upload Settings". Then restart AME and go back to the sync menu and select 'Sync settings now', this time choose "Download Settings".Do all you folders come back with your presets inside or are they missing like me?

Is it possible export H.264 file as wmv in Media Encoder?  If it is possible, what preset do I need to use?  Thanks for any answers in advance.

Hi there,I need uncompressed audio and significant video compression for 4K 60FPS material. What codec / setting would you recommend. Prores 422 Proxy gives me too big files, h.264 compresses audio, but if I choose "Quicktime" in Adobe Media Encoder and then separately h.264 as video codec (which allows me uncompressed audio option) the resolution is limited to 2000x2000. Am I doing something terribly wrong?Thanks in advance for your answers!

I am trying to create an encoding preset, in MXF OP1a DV25 PAL Widescreen, and AME crashes everytime I try to put in a look/LUT to the preset. When I choose to browse for luts and the explorer window appears it crashes before I have even located the lut. Running Windows 10 Pro, i7 6800K, GTX 1070. Windows is up to date, graphic drivers up to date, all adobe apps is up to date. Tried launching AME whilst pressing SHIFT, still crashes when doing that.

Hi all.I have read a lot of discussions lately about Media Encoder slowing the PC down. I have the similar issue. As I could see, people have trouble answering the topic because of lack of information. I have gathered all evidences I could. Hope this will help and will be glad to hear an answer from you.First of all, my specs.Product:AME CC 2017 update from April 2017After Effects CC 2017 update from April 2017PC Specs:Motherboard: MSI Z170-A PRO (MS-7971)CPU: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHzVideo: Gigabyte G1 NVidia GeForce GTX 1080 8GBRAM: Team Group 16GB (8x2) 2400 GHZ1 HDD split in 3 disks and 1 SSD where Windows and Adobe installedProject used: https://bit.ly/2n4wtIy  (not mine), free, found on YouTube.Project Name (from folder): Unknown geometry.Now the issue.As I could see, AME, when started, starts to use "Handles" process.As the project is running, "Handles" process is starting to increase in size (mine in standby is around 40k, in picture you can see already over

After years of working with Adobe products (since CS3) I am completely at a loss with the CC Adobe Media Encoder. It is having an extremely negative effect on my ability to provide clients with an accurate delivery date for their product.Recently, I worked on a relatively simple project in After Effects; some green screen compositing of people in a stationary car with a moving background.Due to poor lighting during filming, I had to chroma key two copies of the same video separately to adjust for color variances. I then nested those compositions into another comp and did a little masking for edge cleanup, where necessary.Finally, I added the moving background in another layer.To recap; I was working with two 1080p 59.94 fps video clips with no sound. One of the clips was nested twice inside a composition and the other clip was used as-is as a background layer. The only effect used was Keylight and the only modification to the clip was masking.The length of the final composition was fou

Hi,tried to render a video project of Premiere CS6 within Media Encoder (over night) – but it failed: size of created mp4 file (h.264) too small, 2 GB instead of about 10 GB (duration of the full HD video: about 1h) → not playable e.g. in VideoLAN.However the log file seems to be okay, rendering duration, too:AMEEncondingLog.txt:- Genutzte Vorgabe: 50p - Video: 1920x1080, 50 fps, Progressive - Audio: AAC, 192 KBit/s, 48 kHz, Stereo - Bitrate: VBR, 2 Durchgänge, Ziel 32.00 Mbps, Max. 40.00 Mbps - Zeit für Kodierung: 03:40:5006/08/2017 06:02:57 AM : Datei erfolgreich kodiertMaybe the cause of this strange behaviour: too less free disc space? Rendered it on the windows 10 partition (SDD) which contains the cache files, too.But if this is the cause, why no appropriate error message?Thanks!Carlos

iI have edited a video in PREMIERE PRO CC on MAC , i want to export the video in MOV format   with video codec APPLE PRO RED 422   and when i am trying to export the video the following message was displayingError compiling CodeYou do not have permission to create or delete the output filePls help me  to solve this issueMessage was edited by: G N Srinivas

After trying to export a video, it failed and I got this error. What does it refer to?[Moved from the lounge to a product-specific, support forum - moderator]

Hello there.I'm trying to export/render out a video meant for Youtube that's an hour and 35 minutes long. However despite several attempts, the end result is always a blurry, ugly mess. What can I do to fix this? Is it my settings? If so, here's what I have everything set to:Is it the bit-rate (it's definitely the bit-rate isn't it)? Should I lower it? Anything I should untick like Maximum Render Quality? Please help me out, the rendering takes three hours and I can't waste my days trying to get this right by making shots in the dark.Thank you.

Hello I’m trying to export AVC Intra 50 720p    from Premiere Pro Export Presets  1280 /720 59.94HD Anamorphic 1080 (1.333)Format H.264The output is correct only the first time all exports after the first are stretched.   I do not expect different behavior with same setting.

So a few days ago i download adobe premiere and CC 2017 and media encoder, at first I could import my mp4 files with no problem abd export them as h.264 format with no problem. But now I can't import mp4 files at all, it only imports the audio. I converted all my files to AVI and i finally could import them but whenever i tried to  export it i got the following error: - Encoding Time: 00:00:0001/16/2017 09:45:15 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Export ErrorFailed to create encoder.Writing with exporter: H.264Writing to file: \\?\D:\test\s01.mp4Writing file type: H264Around timecode: 00;00;00;00Component: H.264 of type ExporterSelector: 9Error code: 24------------------------------------------------------------ - Encoding Time: 00:00:0001/16/2017 09:55:16 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Export ErrorFailed to create encode

I've probably just made a stupid mistake with this, but I've just finished exporting my animation into a video and had ticked the box saying to open it in AME once it's finished but when I did it just loaded forever. I left it for an hour or two and nothing changed so I reopened AME and tried to import the .mov file into the queue by going through the Local Drive part and the same thing happened:Is there something I should be doing or am I just impatient?

Hello!Pardon my ignorance.I transcode an MP3 to any other format that I can think of with encoder, and the results "skip" when played back in VLC, Quicktime player or on a Premiere timeline ... The original played fine in VLC and Quicktime, but stutters, or Skips in Premiere ... (which is why I am trying to covet the file ..)My gratitude to anyone who can give me a helping hand ..=mark=Email address removed by Moderator

Once upon a time I put too many things in the queue, and now, despite never having saved the queue, the queue is always stuffed with the same 28 vids and the reminder of the day four of them failed and one stopped. Can I clear a queue once and for all? Even when I remove everything​, they reappear when I next open AME. I haven't gotten anything working since I overwhelmed the queue, so I'm hoping an AME enema would help.Thanks in advance,

I used to be able to export files from Premiere by choosing the Queue option.After my last update, Premiere now tells me I don't have Media Encoder - when clearly I do.What's the fix guys?Thanks.Chummy

Hi, friends! I have the following trouble. Working with After Effects 2017 (Creative Cloud 2017), rendering sequence of 1:05 min. in Media Encoder. When render goes for around 90-99% (almost to the end), Media Encoder stops working and system message about program termination appears, but Media Encoder doesn't report any certain problem. This problem occurs when rendering in Full HD in Media Encoder. When rendering in Half Quality in Media Encoder or rendering in default After Effects render in Full HD, there is no such a problem, works well. Any ideas?Working on Intel core I7 5820k, GeForce GTX 980, 32 Gb Ram DDR 4, win 10.Hope you are able to help me or have an idea, how to solve the issue. Thanks!

Not sure how you do this? I had 15 separate DPX file sequences in one folder, but I had to select each one separately to import one at a time. Over, and over. Can I batch import this?

I just switched from a Mac to a PC and I am having trouble encoding videos into Apple ProRes. I tried downloading all different versions of QuickTime but I need help. Any answers?

Hi people, is there possibility to export wav format to mxf without video ? Thanks for the answer .