Questions

I've noticed when I've done a fresh install of AME it launches very quickly, just a few seconds. After I've set up my watch folders, 75 outputs to be exact, it takes over 1 mintue to fully launch AME. This is highly annoying for when I need to do a quick transcode to down-rez a file for client approval, fewer than 10 seconds.My question - Is there a way to temporarily disable the watch folders during launch? Perhaps hold the SHIFT key or something similar, which disables the watch folders just for this session but fully restores upon closing and re-launch at another time.

I have loads of 4K footage that I need to make low res proxy files for. I'm working with Premiere Pro 23.1 and Media Encoder 23.1 In Premiere Pro, I right-click an MXF file > Create proxy > which leads me to this screen below I hit 'OK' and the proxy starts to render in Adobe Media Encoder. After about 15 seconds, the proxy fails and when I open the error message, it says "Frame substitution recursion attempt aborting after multiple attempts on file" Any ideas on how to fix this?

Hello,I cannot open Encoder, I use a Mac Os Ventura 13.1, the Encoder version is updated. I receive the message attached and no other explannation. Any ideas? Thanks!

Theoretically simple, but let's say I have a long sequence of repeat loops, with scripting in AE every 5 seconds as the loop repeats certain elements also change. let's say this goes on for a while, and I have over a hundred different loops, I now need to split these into individual files.I've looked around a bit and it seems that Media Encoder and Premiere don't have any way of automating this, I know I know place markers and split by markers but the actualy rendering would still involve manually selecting the duration of each loop, so if anything that's adding work rather than reducing it.Is there any way within the Adobe ecosystem to just split a longer video into multiple 5 second files? This is something a few other video converters (some freeware) seem to have built in so it's curious that I can't find a way within the Adobe ecosystem.

Hi, how do I know when Media encoderhas fiished reering and what's the next step?

Greetings,i've got a problem that is prowling around here for some years now. Unfortunately i do not find the forum's post where it was discussed.Does the MediaEncoder meanwhile support the "comp's frame number" when rendering out PNG-sequences? When i start rendering using ME all PNG-sequences start with frame 000 not taking care of which position i start to render. So existing frames will be overwritten with different/wrong content. Rendering out parts of the animation ist not possible in case you got an idea of producing one row of frames.The AE internal Render Queue allows "[x] Use Comp Frame Number" - but it blocks AE so i can't work on while rendering. Is there meanwhile a solution for ME or at least a plan to fix this issue?Thanks for your response 🙂   Tim²

well exporting adobe shutdown my pc need Help

Desde hace días cuando intento exportar un mp4 desde Media Encoder tengo inconvenientes.Lo exporta pero a la hora de ver el resultado es un archivo dañado de 24 bytes.Ya instalé y desinstalé varias veces AE y ME, seguí todas las indicaciones y no hay forma. Alguien que me ayude?Gracias

Dear AME users, the AME Team would like to extend a heartfelt thank you to all of you who have reported issues and provided actionable feedback. Your input and assistance have been invaluable in helping us continuously improve Adobe Media Encoder. We would be nothing without our users. Thank you for your continued support and for being a part of the AME community! Have a great 2023! Please post all your comments and issues in this forum. We are here to help.

Hi,I have just started using AE CC and I was trying to output some videos but there was some bugs with the time using render queue but I had found the problem and fix it. But while solving this issue I found an odd problem with the Adobe Media Encoder CC. Everytime I click on export to Media Encoder it renders the video with no content just a black blank screen. The temp AE files it generates is fine no issues just the video file is blank. I tried a different animation that I had also created same problem. I got someone who knows AE and he tried using different codecs but its blank too. There is no problems with AE or the working file because I can render videos with no problems using the internal render queue, Its only media encoder having this odd issue. I had tried updating Media Encoder to 7.01 even though its already 7.01 but still the same problem. How do I uninstall and reinstall? I have media encoder cs6 installed on my mac too. Will that cause any conflicts? Currently I have t

Issue popped up today where I can no longer render AE comps in Media Encoder. Always fails with error message: Could not read from the source. Please check if it has moved or been deleted. Nothing has changed from a file location standpoint. Will not connect through Dynamic Link. Tried uninstalling and reinstalling both Media Encoder and After Effects. Tried multiple restarts. Only thing I've updated in past few days in graphics card driver. I am able to queue exports from Premiere to AME and export without issue. Any ideas to fix would be appreciated.  PC/Windows 10GeForce GTX 780, Driver Version 445.87AME: version 14.1AE: version 17.0.6 

Lately, whenever I send a render from After Effects to ME 23.1, and begin the render... in a couple minutes my PC will freeze requiring a restart. After a restart ME performs the render with no issue.Anyone else having this problem? PC, Windows 10 Home v.21H2 

I am seeing a new issue where only .mp4 video encoded produces repeatable lagging output (like duplicate frames, not a player issue) where other formats used in the composition have no issues. This issue did not exist in the previous version of ME. Software and hardware renders produce the same results. The MP4's converted to sequential images produce proper results. The MP4's (that worked before) files are all local. Rendering out of Premiere Pro produces the same results so I don't know where this lives exactly. Recent renders of this edit  with the same video files do not have the issue.

Добрый день, у меня была ошибка с самого начала работы с ME при рендеринге видео, также не удается получить видео при рендеринге в AE!

Hello, i have a 7 hour movie which takes about 16 hours to render to you tube H264 codec. Now i have split the edit into two shorter ances like 3,5 hours each and the render times are only 2 hours each. I am wondering why the render time becomes so extremely long with the longer clip, is that maybe because of to little harddisk space to render the long file?Source matterial 1920 *1080 mp4Hardware macbook pro i9 64gb ramOutput coded youtube full hd Sequense has some after effects clips with dynamic link, not heavy just some moving titlesThanks

Media Encoder render 24bytes ! no matter what i doCan you help me if you find a solution?yarinalushgd@gmail.com

When I export video with media encoder 2023, no matter what preset is used, as long as the rendering is in the Chinese folder, it will export 24bit non-playable video.

Hey there, so I am having an issue with trying to make video clips out of a mov file that has tracking data embedded into it (for a AR related project), however when I export out a clip this data is not there anymore. The inital file was recorded on a Atomos Shogun, which primarir;lly uses  Apple ProRes and Avid DNxHD/DNxHR codecs. I dont know if theres a setting I'm missing but if anyone has any ideas I would greatly appreciate it Thanks in advance

Pretty major bug in Media Encoder v23.1 (build 81) on both Windows and Mac. If you batch export a bunch of interlaced timelines from Premiere, even if everything is set correctly, the resulting file will have bad deinterlacing applied to it. If you click into the export settings and hit OK, the correct interlacing is set, but you must do that for EVERY ITEM in the batch list in order for the exports to be done correctly.This is a huge pain for our project, which deals with 51 eps of interlaced video. 

I obtain always a ME2023 crash when adding many (30+) timeline to render dragging directly from premiere pro. It render the first ones but I experience a progressive slowness between one to the next till crash. It's like a memory progressive saturation. I assume the program is not able to relase the memory when done each work before loading the next one..  Has someone esperienced the same and solved this issue?  My system has W10 64bit - I7 processor, Asus Gtx1070,  1tb SSD and 32Gb of memory.  Thank you for your reply.

why -1609629695 error 

Hi there,I have premeire project to render and i have jsx file which contains below contents to queue in media encoder./////////////////////////////////////////queue.jsx/////////////////////////////////////var ProjPath="\\\\192.168.150.8\\AB_Matte_Renders\\CBSE12MAT11\\AHB\\PP\\CBSE12MAT11ST006IA009.prproj";var presetpath_4k="\\\\192.168.150.8\\AB_Matte_Renders\\PP_automate\\presets\\4k_ahb_cbr75.epr";var outpath="\\\\192.168.150.8\\AB_Matte_Renders\\PP_automate\\out\\myout.mp4";var guid="aa14ef49-55e8-4034-97ac-282aad4d564a";var format="H.264";app.getFrontend().addDLToBatch(ProjPath,format, presetpath_4k, guid, outpath); ////////////////////////// Now am using bat file below to queue in media encoder.////////////////run.bat//////////////////"C:\Program Files\Adobe\Adobe Premiere Pro 2022\Adobe Premiere Pro.exe" --console es.processFile "queue.jsx"///////////////////////When media encoder is closed and run the bat file it works fine and queues it.When media encoder is already

Ich kann mit der Media Encoder v23.1 keine Videos mehr rausrechnen. Es kommt immer dieser Fehler: Datei mit Warnmeldung codiert------------------------------------------------------------Der Datei-Importer hat eine Unregelmäßigkeit in der Dateistruktur von Teaching - Kommunikation & Sprache finden_1.mp4 entdeckt. Das Lesen und Überschreiben der Metadaten (XMP) dieser Datei wurde deaktiviert.Adobe Media EncoderXMP-Daten konnten nicht in Ausgabedatei geschrieben werden.Mit der v22.6.3. geht noch alles. Aber ich möchte nicht alles in Premiere nochmal machen, seit ich dort auf v23.1. upgegradet habe.Hat jemand einen Tipp?

Every time i try to export my animation into an mp4, media encoder says it just fails. every single time. I've tried to look up a solution but none of it has worked. It just says on the side that it's failed and I get an error screen in adobe animate that says "Adobe Media encoder failed to encode, please check the status in Adobe Media Encoder queue for more details!" but I have no idea what that even means, if it doesn't mean looking at the literal queue in Adobe Media Encoder. Help 😞

When I send my project to media encoder to render with After Effects, Media Encoder adds it to the queue twice. I have to delete one of them each time.