Questions

I use Premiere Pro to produce a video from a musical. I use a set of six cameras and a Zoom H6 to record audio. As the audio I get from the mixer board is dry, I add reverb to it. As the musical includes a number of stage changes, there are many cuts in my production. It seems, that for each time I cut the audio, Media Encoder needs to make a separate run of the audio when it compiles the final video. I have about 30 cuts to my audio now, and as I use two channesls, Media Encoder now goes through the audio 60 times. The final video is a little more than 1 hour. Compiling the audio takes 3 hours, compiling the video takes 30 minutes. I use an AMD Ryzen 9 5900x and an RTX 3080 graphics card, so there should be no shortage of processing power.

In premiere pro CC 15.1 , when i try to export to media, nothing happens.  When I click again, the screen goes black and looks like premiere pro CC crashed.  I read about deleting media cache in one of the forums,delete the media cache, still not able to export.  Premiere Pro CC was upgraded automatically from 14.9 to 15.1 and media encoder was also upgraded to 15.1 recently.  I did not have this issue in 14.9.  I have createda video sequence in 15.1 with audio etc,  and now it is even difficult for me to transfer that to 14.9, because premiere pro cc does not allow downward compatibility.   I have also tried uninstalling 15.1 versions on bothpremiere pro cc and medic encoder,  restarted the computer. Even after that, I am not able to export . Any help is much appreciated. 

Hi all, I've come to you in a time of dire need. I've picked this forum because the problem has manifested itself most in Media Encoder, although I suspect it might be a larger scale issue. I've been having issues exporting anything from media encoder, or premiere. Here's what I know: -It started with issues processing wipe & dissolve transitions between AE comps. Gave me error code -1609629695. -It's expanded to freezing about 10 seconds into exporting any video-It seemed to come out of nowhere about 3 days ago-I've exported the same projects in the past, but now can't -Often premiere crashes when selecting the problematic transitions-The issue(s) does not go away when removing transitions-Media Encoder sometimes fails render and gives error, and sometimes just freezes-Sometimes my entire screen will go black, mouse goes unresponsive, and all software crashes after screen comes on again-The video I've had most problems with is a premiere timeline with some

Adobe Media Encoder worked just fine on my computer yesterday. Today it just won't allow me to add any new sources. Whenver I try, the progress bar for importing appears. When it reaches 100% everything just freezes, and after a while Windows tells me that the program doesn't respond anymore. All I can do is shut it down via the Windows processes screen. And in Adobe Premiere Pro I'm not even able to export any projects to a media file. When I choose File -> Export, Premiere just stops responding.  I've tried uninstalling both Premier and Media encoder and then reinstalling them. I've emptied the cache. I've tried upgrades of my graphics card. I've checked that I have enough disk space and cache.  Is it just me, or are the Adobe programs becoming more and more unstable for every update? I have clients waiting for their video feils, and I' mat my wits' end. What do I do? I'm running Windows 10 and I have set my Adobe subscription to automatically upate t

I tried reinstalling Media Encoder and that did nothing.  Any ideas?

Recently, it took half hour to send my AE file to Media Encoder.And, it took 1 hour to render a 15sec video.Anyone has any idea to improve it? 

Good day, I am trying to export a video from After Effects 2020 to Adobe Media Encoder 2020.  One of two things happens Adobe Media Encoder either freezes (not repsonding) (This started happening after I updated After Effects) or Status goes to failed and I get the below error (This happened after I uninstalled the program and reinstalled it): Also worth noting I followed this tutorial yesterday, which did nothing, but hopefully didn't make matters worse: https://www.youtube.com/watch?v=ukaMTpq2mT4 (although I can't run as administrator) - Encoding Time: 00:00:0105/20/2020 08:28:28 AM : Encoding Failed------------------------------------------------------------A low-level exception occurred in: H.264 (Exporter:4)A low-level exception occurred in: H.264 (Exporter:4)A low-level exception occurred in: H.264 (Exporter:4)A low-level exception occurred in: H.264 (Exporter:9)Export ErrorError compiling movie.Export ErrorA low-level exception occurred.Wr

Hi,im rendering a short video with a lot of effects and everything but its taking ages to render and at specific moment it just gets stuck.I have Ryzen 7 3700x, GTX 1080Ti and 16GBs of 3200Mhz ram and these are the settings i use Does anybody know how to fix it?   

Could someone give a step by step about how to export proxy's as MXFs at DNxHD36 in Media Encoder? The files I'll be using will be prores4444 at 3.2k, and arriraw at 3.4k. There's so many options in the pull down menu, I'm unsure which to choose.  I have Premiere Pro and Media Encoder, the editor has Avid Mc.   Many thanks.  My back up is to do use this: Wrapper - apple ProRes MXF OP1aCodec - Apple ProRes 422 proxy 

Premiere Pro 15,1 wont queue to Media encoder 15,1. It says Media Encoder is not downloaded even though both are installed on my computer.

Hi there Does anyone else experience that Creative Cloud causes programs and computers to crash? We've been using the Adobe Suit for 25+ years and never experienced frustrations like these. And it seems to be getting worse. Adobe programs often freeze mid-work or while saving causing our computers to completely restart themselves! And we're not working on poor quality computers, we use latest and top of the range technology for large and high profile jobs. This is absolutely ridiculous. Biggest problems we face currently are with Adobe Premiere Pro, After Effects, Media Encoder, Photoshop and even Illustrator. In addition to this, it seems that Creative Cloud keeps disconnecting, interfering with programs and or not responding.  Adobe seriously needs to start fixing these problems, its programs and services are extremely expensive, the least it should do is work. These problems have been going on for months, even updating programs doesn't seem to fix anything fully. I'm

Guten Tag,Ich vermisse das in After Effects beim Export über die Renderliste verfügbare Feature,dass die Kompositions-Framenummer für die Namensgebung verwendet wird, wenn als Bildsequenz exportiert wird.Im Export von zB After Effects-Sequenzen über den  Media Encoder, ist es deswegen nicht möglich immer nur die neu bearbeiteten Teile einer Sequenz neu als Bildsequenz zu exportieren. Da egal wo man in der Sequenz mit dem Export beginnt, der erste Frame immer mit 1 benannt wird.

Hey everyone! I'm here because I'm having a big problem, and I hope someone can aid me:I've made a video using after effects, not so complex, with just a few effects, and I'm trying to render it with the alpha channel in Adobe Media Encoder, but for some reason, the video's size becomes too big, reaching 400MB, and it's not running when I try to play it. I've tried to render it with "QuickTime Apples 4444 Alpha", and with "QuickTime GoPro CineForm RGB 12 bits Alpha" and both end up with the same errors.But when I render it "normally", with H264, no alpha channel, it comes out perfect, with only 6MB. And it's a video with a length of 1min only. So, that's it, that's my problem, and I hope someone can help me, it's for a job and I need to render with the alpha channel.Thanks in advance!

Hey, my Media Encoder is verry slow since the last Update to 1.5.1 With the old builds i can render my 1 Hour Project in 4K with Lumetri and GPU (NVIDIA) in around 1 Hour and 10 min.With the new 1.5.1 it takes up to 4 hours!

Is anyone else having trouble getting DynamicLink to connect AE to ME or vice versa? I've been trying to export projects today and I'm on a serious deadline for these things and I can't get anything done. OS: macOS Big Sur 11.3 (11.3.1 after tonight)Hardware: iMac Retina 5K 27-inch, 20203.6 GHz 10-Core Intel Core i932GB 2667 MHz DDR4AMD Radeon Pro 5700 XT 16GB 

For the past couple of weeks Media Encoder has frozen a short way into the process on BOTH my laptop and desktop computers. Thankfully I can still export directly from Premiere Pro and wait for the file to finish encoding before proceeding. Major time loss. Both computers Dell PC's Any Ideas for a fix? I have already reinstalled software on both PC's.

My encoding and error logs for AME don't seem to be updating properly. Often I get a "completed with warnings" yellow exclamation point, with a link to an error log, but then there is nothing about that render there. I've had some "hardware encoding" renders from PP fail on me the past couple of days (AME just gets stuck and all I can do is manually stop the render), and those don't show up in either the error or regular log. At all. Also, renders that complete with with no warnings are often missing from the log file. My my log files go back to 2016, and I can see that those entries are full of information. I'm not sure what to do here...any advice about how to get entries reliably showing up in my logs?Thanks,Lori

I was rendering a video from AE yesterday that initially said it would take 1.5 hours to render, after 5 hours it crashed. After reading multiple forums saying there have been long term, unaddressed issues with rendering performance I decided to attempt to render directly in AE. New video is 1080avi, the initial calculation said 4 hours. Currently I am 8 hours into the render at 75% with 3 hours remaining. What in the world is going on with rendering times? This is a 4.5 minute video, using RotoBrush 2 (frozen). There is no reason this video should be taking an entire day to render. I've been trying to render overnight but after multiple crashes this has been ridiculous.  System Infoi9-10850k 3.6GHz. 10 CoreNvidia RTX2070S64GB 2666MHz Error Report- Encoding Time: 04:10:3004/28/2021 06:01:10 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Accelerated Renderer ErrorUnable to produce frame.Writing with export

I am on a mac and I sent a project from AE to ME and Me opens but nothing happens. I tried to import that file manually and it just hangs.  Please help.

Hello Premiere Pro Version 15.1.0 (Build 48)Media Encoder Version 15.1 (Build 42) I know I'm probably staring at the problem and will facepalm when I see the answer but I'm trying to export a 12 audio track MXF OP1a and, while it's creating a 12 track file only 8 tracks have audio. the bottom 4 tracks are blank. Here are my Sequence Settings: Here are my output settings: Here is my timeline: And here is my timeline with the output file dragged in to check (note tracks 9-12 have been created but the audio is blank): Like I said, I know I've probably just got some setting incorrect but I can't, for the life of me, figure it out. 'Any thoughts? (Note: I will be cross-posting this to the Premiere Pro forum)

Video flickerings appear only after rendering animations into mp4 (from Ae to Me, and same from Pr to Me). Flickerings are random and even appear when I render the mp4 file again. There are no flickerings in the preview.  already reinstalled my display drivers, reinstalled Ae, Pr, Me programs, updated Windows. I'm out of options. Maybe it's something in rendering settings? I need help here.  Thanks ! It's seen at  4-5th seconds in the video. The same things appear here and there in 3minute long animation. 

I think what I find most disturbing is that people have been having this problem for a while, but there is no answer from Adobe.  I need to know how to fix this, but there is no answer.  When I check out others in the community, to see if Adobe responded to them I am not seeing any response.   Adobe people, please address this issue.

I'm new to Adobe Media Encoder, I've been trying to render an animation I made in AfterEffetcs (also new to that) and every time I try to render it fails and I get an error message saying it's "unable to produce frame". If anyone knows what I could do to fix it or what might be wrong I would really appreciate it! Thank you.

ME can't create any proxy file from 4:2:2 10 bit 4k Sony A7SIII footage. Is so annoying. What could it be? I have a Ryzen 7 16Gb and 1660Ti laptop. 

Hi there ,videos I converted with AE are extremely jerky and far from being smooth - and unfortunately I have no idea what else to do. No matter which player (even the VLC) - have tried several settings in AE and several players. Also the frame rates are identical. Haven't really worked much with the AE yet. Would be great if you had an idea what I possibly do wrong here. I don't know what the problem could be.best thanks