Questions

Specifially, using the Spectral Frequency Display, what is the dark-ish line I'm seeing slightly above 10k that gaps but then continues above the gap?  

I am working on a podcast with a colleague in another state.  We both have purchased Audtion.We have collected clips in a Google drive and are able to edit those fine.When I create a mulittrack session, however, she can't work on it at her end.  When she opens the sesx file, the clips I've added show up, but they aren't linked to anything and there's no sound.  Is there a system we can use to collaboratively edit multitrack sessions? For ex, can we use Creative Cloud libraries?  Or is there a way to re-link the files to the multitrack session when we open it from a new computer?

I am working on a podcast with a colleague in another state.  We both have purchased Audtion.We have collected audio clips in a Google drive and are able to edit wav fine.When I create a mulittrack session, however, she can't work on it at her end.  When she opens the sesx file, the clips I've put are there, but there's no sound accompanying them.   Is there a system we can use to collaboratively edit multitrack sessions? For ex, can we use Creative Cloud libraries?  Or is there a way to re-link the files to the multitrack session when we open it from a new computer?

Good afternoon. I have bought and downloaded some iZotope plug-ins to help remove mouth noise from my voiceover recordings, but Audition has loaded all of said plug-ins in three separate areas under "Effects": VST, VST3, and AU. (As in, all the same plug-ins are available for me to use in all three areas.) Would anyone happen to know what the difference is between those three, and what exactly they are? I have tried to Google which one I should use, but can't make heads or tails of all the technical jargon users post on Reddit and Quora. I'm not too fancy with vocal editing yet, and I'm only trying to get rid of a bit of noise without ruining the quality of the recordings. Is there anyone who could possibly explain the differences between those three? Thank you so much in advance!  

Is there a way to set a punch out point when doing punch and roll? In the tape recorded days I had to set a punch in point and punch out point. then it would automatically stop recording at a certain point so you didn't accidentally record over any good audio after the bit you were replacing. But all the tutorials I've watched so far have folks stopping the punh recording manually by pressing the space bar. Am I missing someting?  Thanks! 

I keep running into this problem when saving a wav to an mp3. I work for an indie radio station that requires all the uploads to be at -0.1dB. I do this through applying a hard limiter on the wav file, then saving as an mp3. This works fine, but if I close the file out of audition then re-open it to check it, it's no longer limited to -0.1, it's hitting 0db and clipping. Sometimes the track length has changed too, usually by around 0.08s but I need it to be exact. I've also tried saving it as an mp3 first and then hard limiting it, but that makes no difference. Is there something in my settings I need to change? Is there an easier way to do what I'm doing than using the limiter? Thanks!

Hello Audtion Community,  Here is a strange one. I have a multitrack file (radio show) that is 2:00:00 in duration. When I go to export the session to an MP3, the resulting file is only 1:59:53 in duration. I am running the most recent build. This happens regardless of whether I am exporting to a MP3, WAV, or other format. This is a new issue that I have never seen before. Any insight on how to correct this would be appreciated.  Thanks. 

Hi. Onedrive is not visible in the Media Browser anymore, with the current 2020 edition.  Please advise.

Hi I was wondering if you could help me, my music track sounds distorted, when I active to sum to mono, my music sounds good again, any suggestions, on what is happening thank you?

 does this happen to you too? macbook m1, adobe always updated.

I've been editing a sequence from premiere in audition for a week now (dynamic link). But yesterday, the video stopped showing up. I have the window open, and all my sound clips are properly linked, but I can't see my video. Thoughts? Build 22.3.0.60

Hello! I have a recording with sound quality that I would like to improve. Got Adobe Audition software and tried various things in there (mainly different Effects). However, I'm not a professional and whatever I do does not make much of a difference. The software is clearly designed for professionals (too many parameters to change). Thus, I'm seeking some professional advice. Here is the excerpt of the audio which should also be available in this message (it's my first post and I don't know if the file is attached properly). I would really appreciate it if someone could provide some advice on how to improve the quality of the audio (if it is possible). Thank you very much in advance!

Not sure what's going on but there are VSTs that refuse to work in Adobe Audition using Izotope 9 on an M1 mac.  

When trying to save multitrack session this message comes up sometimes with a progress bar that never advances.  After waiting several minutes, clicking the close box leads to "Audition not Responding" requiring a force-quit, causing session to not close properly. I don't see any mention of this dialog box anywhere on this support site - has anyone else ever seen it? 

I recorded a project in Audition on my MAC, but when I go to listen to it in Audition on my MacBook Air the plugins cannot be found and are greyed out.  I looked in the plugin manager and they are all there and enabled.  What is causing this problem and how do I fix it?  Thanks

I rarely use Audition but the last few times I used it the sounds I want to remove (high pitched hums in the background) are audible in PP but inaudible in Audition. I've tried tweaking a few setting that connect to my speakers/headphones but I still can't hear the sounds I want to remove in Audition.  How can I troubleshoot and fix this issue?  

I exported the audio from a scene in Premiere to Audition, and when I play the clip, I hear every track except for the center one. As you can see from the image, there is a waveform in the center channel and it is appearing in the levels panel. Is this a problem with my speakers? I can hear the clip fine when I'm just playing the audio track from Premiere, so I don't think it's that. Any help would be appreciated. Link to file: The_Force_Awakens_-_BLU-RAY_t00 Audio Extracted Audio Extracted_2.wav - Google Drive

Is it possible to record audio from two separate locations? I.E. My podcast has two hosts, but we live in different states, is it possible to record both audio tracks simultaneously through Audition? If not, is it possible to record audio from another program (Zoom, Webex) and then separate the audio files for the two speakers?

We will be doing a lot of these videos of guys riding efoils.  The noise in this sample is typical of what we can expect.  It's filmed with a Hero 9 GoPro.  In this instance the camera is mounted on the helmet. It's important that we hear the rider talking.  I guess that we don't want to remove the noise of the efoil completely but definitely a lot quieter than straight out of the camera. We are using Premiere Pro and Audition 2022.  Best to consider me a beginner.  I have tried via tutorials to get this right but not successful as yet.  Any suggestions please?  Sample is attached.

Hello everybody. Firts of all I've NO knowledge of anything here. I'm simply asking this: I would edit for myself sound files of a videogames that have .sbs and .sbr extension. It's something possible in some way? Sorry if this question isn't correct or appropriate. Thanks. 

Hi there! I was wondering if anyone can help me! I recently had podcast recordings in a studio (I expect this was recorded with a Rodecaster) and got the files sent to me. To my surprise I found out that all the different microphones and tracks are placed on one single audiotrack. Which makes it impossible for me to edit it. Does anyone know how I can separate these recordings from each other? And is this even possible?I hope someone can help me, Thankyou so much! 

HiFollowing a recent Windows 10 update I'm getting this pop up when opening Audition "The audio input is not activated. Recording audio is not possible. Please check your input configuration."Version 3.0Build:7283.0The in-built monitor mic is responding to sound (ie Cortana) but when I try to record sound in Audition this pops up:Any answers out there?Thanks

Hi,  ich hoffe, dass mir jemand helfen kann, denn seit kurzem habe ich sowohl im Multitrack als auch im Waveform merkwürdige Symbole von einem Mikrofon und einem Pause Button unter jedem Feld.  Auch in den VST Plugins tauchen die Symbole auf und verdecken häufig wichtige Elemente.  Kann jemand sagen, wo ich die Symbole deaktivieren kann?  Bild ist im Anhang.  Vielen Dank für eure Hilfe GrußJJ

I was trying to experiment on effects on the waveform tab, then suddenly my audition stopped workingI forced close it and when I tried to open it again, my multitrack progress got reverted back to 30 hours ago of workIt's been 49 minutes since the crash happened and I'm still trying to find ways to get it back Can anyone help 😞

Recently switched over to Audition from Logic Pro X for the advanced mixing and sound repair functionality. There's a key feature I need to edit my audio though.In Logic Pro X, you can press semicolon to "move clip to playhead" and it's invaluable. Dragging is okay, but I'm surprised there isn't a single hotkey. Cut and paste isn't right for something this simple either; it's too forceful and could result in mistakes much more easily.Is there a solution for this? Seems really basic, yet all the threads I've read on this forum settle on drag-and-drop as though it's comparable. Below is a feature description from a blog I found for Logic. Thanks in advance for your help.