Questions
Recently active
I am not sure why Adobe Bridge, which created Flash Galleries keeps .jpg extensions in the file name, but I would like to remove them. This was never an issue in versions prior to CS 5.5.When I open flash and try to remove the .jpg extension the files are not recognized by Bridge any longer.What's even worse, is once the Flash Gallery is created in the htm file, the .jpg extensions still remain in the name portion. Kinda dumb since the photos are now part of an htm Flash Gallery, and no longer a .jpg file.Is there any work around this?Thanks in advance.
I've downloaded the DNG 6.6 ACR update and images still don't open in PS/Bridge. Does the "Convert to DNG" box need to be checkmarked under Bridge Preferences?Thanks for helping.MJ
bridge cs4 crashes when open mac ox10.6.8. I reinstalled but did not work.whats next???
Huge new issue.Images preview (full rez previews) -- some look blurry in Bridge in the Preview. Then I use magifier or open in PS and it's just fine very sharp. What is this? real drag.
I'm looking for somebody who can write a script for Bridge that will allow me to export specific XMP Metadata fields to either a spreadsheet or XML document. I have 1,000's of files I need to retrieve the metadata for, I'd prefer a script that can do them all in a batch. Can anybody either help me, or direct me to somebody who can help me?
The problem is, I work with a two-monitor setup. One is the actual working area with a painstakingly constructed layout of panels, the other one has a synchronized window with a full-screen Preview. Every once in a while I accidentally close the working area window, and because Bridge only saves a "current state" in workspaces, my painstakingly crafted window is just gone, poof (sound effect, not slang).I know I can save a duplicate working space. That makes it somewhat easier, but I still have to delete the botched working space and create it again as a copy of the duplicate. This, coupled with the fact that the first stage of any troubleshooting on Bridge is to nuke all settings, makes me a bit uneasy with the solution.I would be very grateful if someone knew of a way to export workspace settings so I could just load them back in when I mess up or Bridge does.
After being frustrated by this error message in Bridge while trying to apply keywords to various image files I finally took the time to investigate, and I think I found the cause of the issue. In a nutshell, if the extend attribute "com.apple.FinderInfo" has not yet been created for a given file, then this message appears.The start of the puzzle was that some files would take the keyword and others would not. After observing identical permissions on files that worked and files that did not, I noticed that in a terminal listing of the files in question, some files had extended attributes and some did not (extended attributes are identified by an @ symbol when running ls -la in a terminal window. For example:-rw-rw-rw-@ 1 mike staff 26131946 21 Jan 23:56 120114-133059-4612.cr2-rw-rw-rw- 1 mike staff 5710 21 Jan 22:42 120114-133059-4612.xmp-rw-rw-rw-@ 1 mike staff 27200794 17 Jan 17:52 12
For the past few weeks, Bridge has repeatedly been freezing immediately after opening the program. The normal screen appears with either Favorites or Folders showing, but no thumbnails. In the lower left corner, only part of the little rotating circle shows that normally indicates Bridge is working, and it is frozen. Sometimes if I just let everything sit for 5-10 minutes, the thumbnails eventually appear, but if I click on another folder it freezes again. I have repeated trashed the Preferences and rebooted the computer, but it coninues to happen. Any suggestions on what else I can try?MacBookPro (early 2008, Core 2 Duo), OS Lion 10.7.2, Bridge 4.0.5.11Thanks, - Greg
I'm trying to add metadata to videos for CQ5. We don't have any use for the DICOM fields but it would be great if I could just rename the field title in Bridge and then carry that data over to CQ5. I guess I could try adding new fields but it seems like it would just be easier to rename an exsisting field.
Joseph Heller would be proud.Adobe Bridge, CS5 crashes when starting up. I downloaded Photoshop CS5 Extended, installed it on my new MacBook Air (this computer has never seen any CSx product). Installed the CS5 serial number, installed the SC4 legacy serial number, all is well. Photoshop runs fine. I installed all my Nik plugins and Bokeh Plugin. All is well. I tried running Bridge, and it crashes during the launch "The operation could not be completed. An unknown operating system error has occurred." Adobe released an update, which I downloaded, but during installation, it too crashed (couldn't perform the update and provided a link to Adobe support. Fours hours later with Adobe. Tried:1) Deleting the PLIST file for Bridge, no luck.2) Tried the Option Bridge trick to reset all preferences in Bridge, no luck.3) Created a new Admin account, logged into it, Bridge worked.4) Adobe technical help said it is now an Apple problem si
I'm trying to learn enough about scripting to understand/modify some simple Bridge scripts, but can't seem to find the proper documentation. I have downloaded the Bridge SDK, have the documents for Adobe Intro to Scripting, Adobe Bridge CS5 javascript Guide and Javascript Reference Manual, and a general Javascript manual. But I can't find where BridgeTalk commands (such as send, onResult, and remote Photoshop calls) are described, as well as many other commands like push, localize, or the use of $ signs.Can anyone point me to reference materials I would need to learn these things??Many Thanks
After doing a clean install of CS5, everything seems to work well except for Bridge. HDV mpeg clips will not display a visual thumbnailor playback in preview window of Bridge. When double-clicking icon, I get an error "Windows cannot find '%ProgramFiles(x86)%Windows Media Player\wmplayer.exe'. When I double-click an AVI file, Bridge finds and uses Windows Media Player just fine.Need MPEG preview badly!!!!MPEG clips are working fine in Premiere Pro CS5 and AME rendering is awesome!!!Thanks, rg
Is there a way to open a folder tree with one only click?In a massive ammount of folder and inner folders it would be great to have this with only one click.
I'm writing a script to help users install custom info panels in the Folder.userData + '/Adobe/XMP/Custom File Info Panels/3.0/panels' location. I have a working script to copy files, but I also want to delete previous versions of the same info panel. I also want to allow for the possibility that could be several older versions so I need to loop through them. I know that I need to empty the files of a folder before it can be removed. I can remove one instance of a ninfo panel, but not several - I'm having trouble getting the function to loop. For example, if I have two old info panel version to delete (myPanel_v1 and myPanel_v2) can use getFiles (myPanel*) to get an array with the names of the two parent folders:~/AppData/Roaming/Adobe/XMP/Custom%20File%20Info%20Panels/3.0/panels/myPanel_v1,~/AppData/Roaming/Adobe/XMP/Custom%20File%20Info%20Panels/3.0/panels/myPanel_v2What I can't do is the loop through the subfolders and their contents based on the index
I am seeing ".spec" in some of the bridge scripting but cannot find any details on this property. Could someone help me out. Thanks in advance.
Is possible to create a batch from adobe photoshop 5.5 and use a command line to execute? I need easy batch like "open and save in another kind of extension" but can't find the solution to automate the process from command line.Any1 can help me?Thank u all
Hello,In Bridge, under Tools>InDesign> there is a script called Create InDesign Contact Sheet. This script does not do exactly what I would wish so I would like to duplicate it and then modify it. But I cannot figure out where it is stored. Any ideas?Thanks,Tom
Hello group. Happy New Year.I'm looking for a script which would perform an action of copying data from the city, state/prov and country fields and adding that data to the description field. I still wish to retain the content in the description field. My stock agency is requesting this be done in order to create a more complete picture caption for web display.Hoping the list can help! ThanksDon
Greetings all. I am having an issue with setting ratings AND labels on image files at the same time. If the script sets the label first then the rating, the label doesn't show in Bridge. If the script sets the rating first then the label, the rating doesn't show in Bridge.Is there a workaround for this? Here is my script function for doing this. file=filename minus extension. Rating is a number for the desired rating. lab is a number for the level of Label I wish to set. Everything works great except that I can't set both Rating and Label with the script as shown. In this instance, only the Ratings will show up in Bridge after running the script. If I move the x.label=Label line under the x.rating=Rating line, then the ratings only show for those images with no label (lab=0). Any image that gets a label receives no rating.If you're going to test this, you may want to comment out the Collections part. That's the part within the "switch(Number(Rating))" block.function setRating(file,Rati
G5/dual/2.0ghz/3gigRAM/OSX10.52/CS2 "Could not complete your request because an unknown or invalid JPEG marher type is found." I have a folder of hundreds of images I have collected from the web, all different sources. Using BRIDGE. I opened up various groups of these images from their folder, not the main picture folder, selected ALL, BATCH RENAMED them, for example, "Military000.jpg" Not all of them were jpegs. BRIDGE renamed them accurately as I wanted. But now there are several in each renamed group that will not open in Photoshop as before. I have viewed all of them in Photoshop, or PictViewer, or Acrobat. I know they are not all jpgs, now I want to open them all and save as jpg. I grabbed the free utility FILEINFO, selected all the files, and changed the TYPE and CREATOR names. But Photoshop will not open them either through theOPEN dialogue, double clicking the file, or dragging the file over the icon in the DOCK. What did Bridge do to these files? John R
can anybody help me using this preset? I´m not familiar with java. but I want to use the commandLineRenderer with some extra-options wich are just available on this way. greets, rené
Is it possible to add additional filters (like File Type) to the FILTER palette of Bridge CS4?Especially I'd like to have filters on specific items in XMP metadata.I've found the CustomSortExtensionHandler.jsx sample in the SDK that uses FilterDescription objects.It seems that these filter objects can be used only on special nodes handled by a Bridge extension and not on any regular file.The app.defaultFilterCriteria that is an array of FilterDescription objects is read-only, according to the Bridge CS4 JavaScript Reference PDF.Does anybody have any hint how to add custom filters or use FilterDescription objects on files?(Originally posted in the wrong forum - Bridge Windows)
Hello,The question is regarding my archives that I need to re-name. Say within a folder I have: IMG_4146.JPG IMG_4147.JPG IMG_4147.CR2 IMG_4147.PSD IMG_4148.JPG IMG_4149.JPG I wish to rename the above as IMG_4146.JPG becomes 2000.JPG IMG_4147.JPG becomes 2001.JPG IMG_4147.CR2 becomes 2001.CR2 IMG_4147.PSD becomes 2001.PSD IMG_4148.JPG becomes 2002.JPG IMG_4149.JPG becomes 2003.JPG and so on.. Basically, can I get Bridge to rename all files with the same filename but different extensions, to a new filename which is also the same. As of now I rename all the JPG files in a folder sequentially, and then manually change the filename of the CR2 and PSD files to match to the filename of their JPG versions. Note that every JPG does not have a corresponding CR2 and PSD. Hence I cannot use the sequential filename feature to rename the CR2 and PSD files. Hope I've been clear in explaining what I need. And many thanks in advance for any help
I had to do a system restore only to find on return thatI get a message saying "Camera Raw editing is not enabled. Camera Raw editing requires that a qualiftyjing product has been launched at least once to enable thisfeature"I can open and work on my ORF's via the mini bridge but not the big one, very frustrating. Can anyone help please without me having to reinstall the whole of CS5?Thank you in advance,RonB
I just installed the Photoshop CS5 Production Premium suite on my Win 7 system.I have 8GB RAM, 2.60 GHz processor, 64-bit operating system.Photoshop works fine. However, Bridge does not open. When I click either File>Browse in Bridge, or click the BR icon, I see a momentary spinning circle timer, then nothing. While the little circle is spinning, the red X in the upper right hand corner of the Photoshop window turns gray.I called Adobe and spent nearly two hours with a tech to solve this problem. The solution he came up with is not satisfactory, and I was wondering if anyone else had an idea.We tried to reset Bridge using the CTR while opening Bridge and checking the three options, then restarting Photoshop.We reinstalled Photoshop from the discs.Finally, we set up a new user account on my computer. If I open Photoshop in the second user account, I can open Bridge. However, since all of my thousands of photos are saved in files in my first user account, I cannot save any photos to t
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.