Questions

Hi. I'm trying to convert my RW2 files converted so that I can then use Photoshop Elements 9 to edit them. However, although I've downloaded the latest version of DNG converter (several times!), it still won't detect or recognise any of my RW2 files. Does anyone have any suggestions please?Thanks. Steve.

GH4 RW2 files.  I shot the same target using different gh4 color profiles to test how they look with grading in adobe products.  One was even taken in black and white.When i click on the files from my computer adobe photoshop camera raw opens up but ALL the images are showing the same color profile...even the black and white one comes in with full color!  Even when i open them up directly inside of photoshop the color profiles are not being used.I did the same test in LR and i can see while importing into the LR library the difference in color in the thumbnails for a second or two, but then all of a sudden all 4 images are instantly changed to the same basic color profile.I understand that the RAW images are all the same at base level and a color profile is added as instructions for the software on how to view and handle them.  So how come they are for an instant being seen and taken into effect but in a second later they are discarded and the base raw profile is th

basically what the title says. I saw a tutorial for lightroom 5 and it mention some tools beneath the histogram which mine doesn;t have. I am wondering if 1.4 has mask features somewhere else

Hi,I am trying to understand what is the relation between tag "AsShotNeutral" (from DNG 1.4.0.0, page 37: "AsShotNeutral specifies the selected white balance at time of capture, encoded as the coordinates of a perfectly neutral color in linear reference space values.") and the value of variable CameraNeutral, used in Chapter 6 to calculate the Camera to XYZ (D50) Transform:ReferenceNeutral = Inverse(AB * CC) * CameraNeutralD = Invert(AsDiagonalMatrix(ReferenceNeutral))CameraToXYZ_D50 = FM * D * Inverse(AB * CC)I assumed AsShotNeutral and CameraNeutral were one and the same, but would like to confirm that. For example, consider the following data, extracted from a real linear DNGfile:AnalogBalance = [1, 1, 1]AsShotNeutral = [0.641604, 1, 0.42088]CameraCalibration1 = CameraCalibration2 = [0.9465, 0, 0, 0, 1, 0, 0, 0, 0.9773]ForwardMatrix1 = [0.7163, 0.1301, 0.1179, 0.1926, 0.9543, -0.1469, -0.0278, -0.3830, 1.2359]ForwardMatrix2 = [0.7239, 0.1838, 0.0566, 0.2467, 1.0246, -0.2713, -0.0112

Ok, so I'm trying to update camera raw and the icon has said "waiting..." for 24 hours now. any ideas?1/2  day laterWow this sucks. Cant work with images between LR and PS until i update Camera Raw and for 24 hours now the little icon in my CC says "waiting" - - - - > is there anybody here?

Hi,I am a new user to adobe family. I use adobe Bridge & Camera Raw to edit (crop & color grade) and everything is very slow.For example if i open the multiple files in ACR it takes almost 10 seconds to sharpen the image after i change it. Crop is very slow too. Any suggestions?My PC conf:Dell precision T362032GB RAMi7 6700Quadro k620SSD hdd with system and programsIts a clean install, i tried purge the cache and even change the cache folder.I tried with or without GPU support.Any help would be appreciated

I've set (numerous times) default settings I want ACR to apply when I import images from Photo Mechanic, mainly to do with white point and sharpening. After I set the sliders to the required levels I then click save default. I would expect ACR to apply the settings to all images that are imported automatically. Am I doing something wrong? I'm using two different camera bodies if this helps?Also 2 requests for ACR if Adobe are reading this?.1. Why are the 'tools' right over on the left of the screen? This doesn't make sense at all.2. I wish the crop tool would allow you to straighten the image using the corners and also have a center grab point like on Lightroom.Thanks[Moving from The Lounge​ to the Camera RAW forum. - Moderator]

类似这种情况应如何解决，不止出现在下面，不规则分布

Long time no see!The last few versions of ACR have given us Transform Guides. You use these to draw along actual horizontal and vertical edges to straighten perpective distortion. They're great.My problem starts when I have spent a few minutes carefully lining these up on an image, and then decide to apply an ACR preset. The guides disappear and the distortion returns. This is still the case in ACR 9.8.Is this a bug, or am I doing something wrong?

When will this happen?

DNG Converter (9.8, but earlier also) appears to always load into the converted DNG file one of the custom .dcp profiles available for the camera in the ...\CameraRaw\CameraProfiles directory.  The only way I have found to make it load the default profile (which I assume is Adobe Standard) into the .DNG file is to delete all custom profiles for the camera from the directory.  I need these DNG files for purposes other than LR/ACR.Is there a way to control whether to load a custom .dcp profile and, if so, which one of those available in ...\CameraRaw\CameraProfiles?

This title is a little clearer and hopefully will attract people who work on DNG Converter.DNG Converter (I am using 9.8 but it did this earlier as well) appears to always load into the converted .DNG file one of the custom .dcp profiles available for the camera in the ...\CameraRaw\CameraProfiles directory.  The only way I have found to make it load the default profile (which I assume is Adobe Standard) into the .DNG file is to delete all custom profiles for the camera from that directory.  That's a pain because I then need to put them back in there whenever I do want to use them with ACR.For reference, here is a screenshot of the never-opened, just converted .DNG file as read by exifTool showing my custom .dcp profile in place of Adobe's default (note illuminant, matrix and name):I need these DNG files to be standalone in order to be processed by programs other than LR/ACR.  How can one tell DNG Converter to load default profile information in the converted DNG? 

I recently bought a Lenovo Yoga 900 PC featuring UltraHD screen and reinstalled my Elements 10 software. Everything works fine except that all characters are microscopic, like divided in size by two according to the higher resolution. I could not fine an option to increase size of characters (like doubling the pixels). Is there a clue to solve the issue with Elements 10, or is the issue fixed in Elements 15 (it could be natural as more and more PC feature UltraHD screen)?

I have a single monitor. I use PS Bridge 2017 as my images organizing software.I usually do several clients a day and then in the evenings, I work these files.I shoot everything in RAW.Part of my work flow is to adjust everything in Bridge. Then I click "Tools> Photoshop> Image Processor". I set it and then run it......As a result, Photoshop OPENS on the TOP of my desktop. Images OPEN and CLOSE as PS does the RAW PROCESS.AT THIS POINT, I want to be working on the next set of images in Bridge, HOWEVER I cannot because PS FORCES itself to the TOP as it does the raw conversion.So, I have to WAIT until it is done...the start the process all over again. THUS my question:How To:   Keep PS in the Background during Raw ConversionKirk Voclain

I am unable to open Sony RX100 v RAW files in Photoshop CS6.  The CS6 Camera Raw plug-in is updated to version 9.1.1, and according to Adobe's chart of compatible cameras the  Sony RX100 v is supported.  What am I doing wrong?

Loaded SD Card into iMac and resulting DNGs from Nikon D750 show uniformly tilted (at the same angle).   When I looked at folders with earlier DNGs, all are now tilted - showing empty pixels.   Spent two hours on phone with Adobe with no resolution and only a conclusion that it is an Adobe issue and not a camera or SD issue.   When I load the SD card into my husband's iMac, the images are normal - no tilt.   I can correct with the offset tool by using Command R and selecting photos with same orientation and correcting those.   REAL PAIN.  Any suggestions as Adobe said it escalated and no call back.    Any suggestions on how to correct.   Rep said not to uninstall because he loaded the earlier version and same thing happened. Thanks

I have a new camera that makes RAW files but my computer's only platform is XP series pack 2.I downloaded DNG converter 8.3 which is supposed to be able to run on XP series pack 3.Will it work?  Or is there another DNG converter that run on WIN XP series pack2?Thanks in advance for your ideas.

I'm working on a project where we are using Nikon lenses on Canon (5D mark III) bodies. We managed to come up with a way to put the Lens Model in the EXIF metadata of our DNG files and it works great with Zeiss ZF.2 and other manual lenses but have come up with a problem trying to get Adobe Camera Raw to locate a matching lens profile automatically for a Nikon AF NIKKOR 35mm f/2D. We noticed that Nikon cameras use a Lens ID code number but the code for this lens (66) doesn't work when the shot originated on a Canon body.Is there a way to get ACR to recognize Nikon AF lenses automatically when attached to Canon bodies? Obviously we aren't using the autofocus features or any communications between lens and body. The lens information is being saved via Magic Lantern to an MLV file (Magic Lantern Raw Video) which is then converted into DNG frames that contains the EXIF tags for the lens information.Any hints, tips, or even known bugs to pass along?BTW -- we discovered that the list of supp

Does anyone know why when loaded straight into Photoshop Elements 14 I get chromatic fringes, but when viewed with Microsoft Windows Photo Viewer the same NEF file no fringes? Here's a screen shot of the same NEF zoomed in to hopefully show what I mean, with PSE14 to the right. I'm using a Nikon 7200, latest ACR and PSE updated, thanks in advance 🙂

I'm directed to this link,Camera Raw installer for Adobe Photoshop CC and CS6[Moved from non-technical Forum Lounge to specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Good morning people. I'm having a problem with my acr. I wonder if anyone can help me. The ADJUSTMENT BRUSH tool is not working but has not been created. Anyone have a solution for me? Information: I installed a trial version of Photoshop CC 2017 The acr and 9.8 that already comes with CC 2017 Another important note, even though I uninstalling it and installing again. Thanks.

Very odd issue i cannot figure out why it is happening.I click to open my RW2 files and they auto open up ACR....i edit the photo in there and save it as a preset and close ACR.I can click that same RW2 file it will open up ACR again and i can select that preset and it looks perfect and i can save it and the resulting image is perfect..But....If i open that same RW2 file, then click on open object, it will open in photoshop itself, i then turn the layer into a smart object, select Camera Raw Filter, i select that same filter i created but the image will look different, and i mean a lot different.  I tested to see and save that file and sure enough it is different than using that same filter directly in ACR.I checked and everywhere, both in ACR and in photoshop settings i am viewing and editing as SRGB.  I have tried multitude of tests and the results are the same even with other raw files like DNG files but with very little difference but still there is a difference.final pho

Hello! I've been at this for over an hour and cannot figure out where I am going wrong.I got a new laptop so have had to re-download the camera raw reader; however, no matter what I do, my raw files won't open. I read somewhere that Camera Raw 8.6 is the version I should be downloading, however I can't for the life of me find a download link.Some specifics:I have a Nikon D810I am using CS6.I also read that there is a DNG converter? But I don't want to go with this option. Like I said, I was able to edit photos on my old laptop just fine using CS6 without using the DNG converter.Thank you for your help!

At home I have Photoshop CS6 and corresponding Bridge. I have always used Bridge to open images and do initial edits in Camera Raw. Recently I took a position outside my photography company and they have Photoshop and Bridge CC versions. I am having issues with Camera Raw. I am being asked to edit photos that were taken by others and when I try to open in Camera Raw, the image is black and the outline of the subjects in the photo are pixels, similar to a clipping mask or inverse of an image. Is there a setting incorrect? What is wrong? Please help.