Questions

I can't get past camera raw 10 on my new computer, 15 will not install....

Several Issues when using Noise Reduction through Camera Raw 15.3.0.1451 1. System crash/ blue screen (happened once) after an Error Screen saying the the GPU Acceleration wasn't enabled. GPU Acceleration is set to Auto and is enabled. 2. When Initiating Camera Raw from Bridge with NEF files (D800e) the generated DNG's have artifact tiles, randomly, and varied each time a new DNG is created. See examples attached. 3. When initiating Camera Raw through Photoshop 2022 (Adobe Photoshop Version: 23.5.2 20220927.r.751 2ff5989 x64) Noise Reduction > Enhance maxes the CPU's and never completes. I have to cancel out of several screens to exit. Camera Raw 15.3.0.1451Win 1164-bit operating system, x64-based processorXPS-971011th Gen Intel(R) Core(TM) i9-11900H @ 2.50GHz 2.50 GHzInstalled RAM 64.0 GB (63.7 GB usable)

I have ACR version 15.3.0.1451. There is no Denoise and no enhance. What am I missing?

Hello. When I open a RAW file in Bridge and use the Crop tool, when I grab the corner the grid will be visible as in the attached. This is fine except the size of the grid is way too small. Is there a way to increase the grid size? I've tried various solutions which have been posted but nothing works. Thanks for any help!

Hello,  Has anyone figured out how to adjust the size of the grid lines?  I find the default setting mkes my eyes swim, I can't tell if the pixel width is larger or something.  I can't find the slider to adjust so there's less on the screen in the latest update. Thanks.~M

Recently, the option click to reset and the shift click to set the Auto value have stopped working in ACR (Mac).  Now when I hold down the option key, the "Reset" part at the top of the panel no longer appears.  Of course I can reset each slider by double clicking on the arrow on each slider, but it's much slower that way.  Also the shift-click on the slider title to set the auto value is not working. Any ideas?

Hello! I was editing photos and when I had all of them selected, I accidentally clicked 'Reset to Default' (under the three dots on the right menu), which, obviously, deleted all the editing settings I had worked on. I tried to undo the changes, but unfortunately, it didn't work as I was unable to get my previous settings back. Clickin ctrl+alt+Z did something, but it definitely didn't bring my original settings back. As I spent quite some time on getting the settings right, is there any way for me to reset what I had already created? 

Buenos días..Me he dado cuenta que qualquier archivo raw convertido a DNG y con el botón derecho del ratón y en las propiedades de windows me sale un tamaño y resolución diferentes que si abro el archivo en photoshop.Tengo muchos archivos convertidos a DNG y ahora me tengo la duda de que en la conversión del archivo haya perdido información con respecto al raw original.Adjunto dos capturas del mismo archivo, la resolución en el explorador de windows y la resolución una vez abierto en Photoshop.Muchas gracias

I have the latest update installed.... All of the sudden it is taking 10-20 secinds for a jpeg image to open in camera raw.... any help is appriciated... tia....dave

I open a lot of RAW files in Camera Raw and denoise them in Photoshop using an external plugin called Neat Image.When I open the RAW files in Camera Raw for 16bit operation and create an action, if I touch even one option in Camera Raw, it is applied to all the RAW files in bulk.This means that each photo will have a different color temperature.like 4800k for one and 5400k for another.When I opened Camera Raw to create the action, I chose Lighten Exposure to lighten the exposure for all of the photos, and I chose the original value for the color temperature. For example, let's say the original value is 4800k.When I run the action, all the photos are lightened by the specified exposure, which is what I want, but all the photos with a color temperature of 5400K are opened at 4800K. This is not what I want.This seems to be a bug or there is a usage I am not aware of.I need some advice.

Is there a way to lower or disable the Saturation and Vibrancy adjustments made in Auto Mode? I find that there is too much of both applied when I use Auto Mode. I like using Auto overall, I just don't like the Saturation and Vibrancy Adjustments made. This applies to both Camera Raw in Photoshop and Auto in Lightroom Classic.

I have a new laptop and am trying to pull my ACR camera raw presets from my desktop. I have saved them as .xmp files and sent them to my new compuiter to import, but when I follow the import process the .xmp files are grey and wont be selected. They are 5KB each. Help!?

I automatically upgrade my Photoshop and ACR. Have not been using them for a while and today when I open it...all my user presets are gone!!! Is there anyone facing the same issue here? Asking from a sad and frustrated guy. Thanks in advance.

The one that impresses me the most is dehaze. It's almost like it makes a mask for you on the fly and darkens the background, get the clouds visible etc.. amazing too… when was the invented, and how do they do it? Kind of revolutionary no?   And texture is sort of sharpening?  And clarity is…?

I've moved to a new PC and don't seem to have transferred the Adjustment Pre-sets that normally appear under the Preset dropdown for masks in Camera Raw.  I have located the xmp files in appdata/roaming/adobe/cameraraw/localcorrections on my old PC, but when I copy them into the same folder on my new PC, they don't appear in the dropdown list for pre-sets.  Can anyone advise please? 

I tired with clp and straighten ok (albie a grid come on did not ask for), but alas had to give up as see no way to accept it and get back into the basic tabs.  Maybe hidden , how to click ok?

I have Photoshop CS6 and can't afford to upgrade but had to change computers because mine died.  When I try to reopen Bridge and Photoshop I don't have the camera raw version to support my Nikon D7200 that was supported in my old comp.  Does anyone have a link to a Camera Raw that will work for me?  Can't remember which version it was and can't find anything on line. Have a Nikon codec but that doesn't seem to work.

Hi When selecting files from more than one camera, ACR open files from camera at the time and not all together. So now I have to adjust files from my Nikon and open them, then the files from my drone open in ACR, and I can adjust them. This is new, up till now ACR have opened all kind of files together. I'm on a Mac, 

Hi, for the longest time I am having issue with ACR, that is fortunately just kinda quality of life thing. Scrolling through menus and filters in ACR is incredibely laggy to a point of me going crazy. Sliders are fine though, they are working fine.The video shown is on a fresh install, so no settings are changed. Tried disabling HW acceleration, no effect.If I open presets window, it's faster, but still noticeable.As I know your first steps, i already deleted ACR preferences - no help. This is happening on windows 11 and it was happening on windows 10 before too.Any help will be highly appreciated. I am out of ideas and I didn't even start. Adobe Photoshop Version: 24.3.0 20230316.r.376 37b4b38 x64Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22621.1413System architecture: Intel CPU Family:6, Model:14, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreadingPhysical processor count: 6Logical processor count: 12Proc

Hei, ich habe seit einigen Tagen das Problem, dass Photoshop beim Öffnen von Camera RAW abstürzt.Die aktuelle Version von Photoshop und Camera RAW sind installiert, der Treiber ist aktuell und auch die Festplatte hat keine Probleme.Über Hilfe würde ich mich sehr freuen 🙂

I edit all of my DNG images in Lightoom, and save the metadata to the files. I then open all of those files (for sharpening and the addition of grain) in a batch action in Photoshop, using Camera Raw, thereby saving a generation step that would be added by exporting directly from Lightroom first.  I'm noticing that Lightoom recognizes the built-in Fujifilm lens profiles... But when I open the same file in Photoshop, using Camera Raw, it does not... This is happening with all of my files from a Fuji X-T5 body. No amount of tweaking in Camera Raw will let me get to the actual lens profile, and there's no other way to fix it without exporting from Lightroom first. This is a huge problem, as I'm finalizing a ton of images this way. Is there a solution I'm missing, or is this a major bug? I'm using Camera Raw 15.2, with Photoshop 24.3.0, on a Mac Studio, with Mac 12.5.1.

Hola, Adobe Bridge no me muestra los cambios en la edicion de una fotografia en camera raw, solo lo puedo verlos al abrir nuevamente la imagen pero no en previsualizacion, si puedo hacerlo cuando edito en jpg.

Anwendung : Photoshop 24.1 Windows 11   Problem tritt auf, seit dem letzten Update   1. Schritt. ich öffne Photoshop , alles läuft fehlerfrei. 2. Schritt: Ich gehe über Filter in Camera Raw, alles läuft Fehlerfrei. 3. Schritt: Ich bestätige die bearbeitung in Camera Raw und gehe zurück zu Photoshop. Photoshop hängt sich auf. Ich kann nichts mehr auswählen, speichern oder Photoshop schließen. Manchmal funktioniert es nach 5 bis 10 Minuten wieder aber meistens muss das Programm über den Taskmanager geschlossen werden. Effizientes Arbeiten ist leider so unmöglich.   Application : Photoshop 24.1 Windows 11   Problem occurs since the last update   Step 1. I open Photoshop, everything runs flawlessly. Step 2: I go through filters in Camera Raw, everything runs flawlessly. Step 3: I confirm editing in Camera Raw and go back to Photoshop. Photoshop hangs. I can't select, save, or close Photoshop anymore. Sometimes it works again after 5 to 10 minutes but most of the ti

After a bad experience with adobe support (only in English by the way) I try to post my question here hoping that someone had the same problem solving it. I have had photoshop elements 2023 for a few months and I need to upload some TIF files. The software asks me to install the camera raw plugin which is already installed and even reinstalling it keeps asking. I then followed the instructions on the site by downloading the plugin and following the instructions to go and put the downloaded file in the system folder but even so I always get the pop up that asks the plugin and I can't go on with the job. Does anyone know how to resolve? Thanks.

I installed Ps today and later added DNG Converter/CameraRAw. I cheked the cameraRaw folder te find the profile for my Canon, but the profiles folder is completely empty. How and where can I find the profiles??