Questions

I like lots of  blank lines between chunks of my code but source formatting command removes them all!  I looked at the tag libraries but cannot see how that could help me as it's just about how lines break up before and after tags.  My blank lines are not tags so cannot be changed here.  Am I alone in wanting blank lines to space out my code for readability?

Hi, I am coding simple email HTMLs and it is close to impossible to do anything within Dreamweaver. It takes so much patience to simply type or edit a nested table like I'm working in a beatup 386 computer. It's even worse than writing code in a 386 computer. I've already turned off Code Hints and Code Rewriting to no avail. 

How is it possible to create a "card" with the Bootstrap framework that is entirely clickable. I am able to create a basic Card that has links attached to the images inside the card, or the buttons inside the card however I need to be able to have the entire area of the Card be clickable. I have tried wrapping the Card with various tags to apply Href links to but none of that seems to work. I do not see anything in the Bootstrap documentation stating how to do so. Thank you. 

Hi all - let me first say I am NOT a web developer by any means, and have learned the bare minimum out of necessity so apologies if this is a silly question.I’m having a very annoying problem with Dreamweaver. I have 4 pages and in the same folder of my SharePoint site, i.e.,web1/folder/Home.htmlweb1/folder/About.htmlweb1/folder/Events.htmlweb1/folder/Series.html Each page links to the other 3 via straightforward URL, not even in a fancy navigation menu or anything, just anchor links.I made changes to Series.html, and then I discovered that the link to Series.html on Home.html had been changed to web1/folder/3addbb9 (does not end in .html). I did not make this change.Further, if I fix the link on Home.html, then the link to Home.html on the Series.html page changes to another random number...why is this happening?! It seems as if Dreamweaver is updating the URLs for any page I make changes to I don't want that to happen. Anyone run into this?

When I tried to switch one file to another it shows below error, Please help ERROR:Encountered a sharing violation while accessingc:\Users\<user>\AppData\Roaming\Adobe\Dreamweaver CC 2017\en_US\Configuration\Temp\DownloadCache\fonC0A.css

Hi, When trying to install Dreamweaver I get an error code 183. When then selecting learn more, it points me to XD info and troubleshooting not Dreamweaver. All my other adobe cloud products work and I really do not want to uninstall them all, as I use them a lot and be worried I start getting problems with them too. I am an admin on my computer and installed all other products, like illustrator, photoshop, xd without a problem. Did anybody else had this problem before and know how to fix it?Thanks, Claudia 

I'm just looking to add an Mpeg or Avi video to a web page. any help is greatly aprreciated.Thanks 

What does the (mmtinstance:fileinstance)   tag refer to or mean?Thanks!

I'm new to web creation. When I check my work offline with Firefox it has to have the drive and directory included in links to find them. It seems to me that, when it goes online, this information will cause problems as it won't be present. Any comments would be appreciated.

Double word spacing has been randomly appearing in Dreamweaver v 19 and 20. html doc. I have uninstalled and reinstalled different versions. I am copying from Microsoft 365-there are no hidden characters. I am working off desktop app.How do I get the random double spacing removed? This recently started happening. Ideas?

Can someone help me improve my coding on this site? The index is https://www.deercrossingtreestands.com. I would like to add the feature for a menu icon (3 horizontal bars inside a button) for mobile device viewing. I may not be describing this clearly. Some sites, instead of the full nav bar being shown tiny on a cell phone, they make a menu icon that you open to see the display in a bigger format...   Just not sure how to add that to an exsiting site.    Any help would be appreciated. MaryAnn   [Topic edited by moderator for clarity.]

I have an old website that I built using Dreamweaver. I no longer have a useful version of Dreamweaver. Does Adobe still have the software called Contribute? If so, can I purchase a copy to use to make changes in the website without purchasing the whole Dreamweaver program or whatever you call it now?

I haven't done an ecommerce site since the new state tax laws went into effect a couple of years ago. I have had to turn down customers because I am unsure if it is worthwhile to attempt to configure an ecommerce site to calculate the tax of an item sold according to where the purchase was made. Does anyone have any direct experience with tax configuration in ecommerce sites using DW and the Webassist plugin (or other ecommerce solution)?

Updated to OSX 10.14.6 and Safari 13.1.2, and now when I turn on MAMP and try to go to http://localhost I get a cannot connect error.  Chrome and Firefox work just fine. I've gone through a couple of dozen fixes suggested by various forums but the only thing that will work is to use http://127.0.0.1   I don't think I am the only one in the community that has run into this problem. Any ideas?

Dreamweaver V20.2 build 15263. When opening Large MB .txt files (e.g. 18 MB) . . . . contents are not displayed.  The display area is gray, then white screen.  Sometimes I can see the beach ball. All small file size .txt files open and display contents properly.  

Right, any reason for the slow typing performance? Im typing our code here and there is about a one second delay - quite frankly - it puts me off the whole user experiences. I have tried no troubleshooting becuase my company pays just over £300 a year for this service so we should not have to spend our valable time experimenting with potential fixes.  Our version is 20.2 and build 15263. Anyone else had this issue, and is so how was this resolved?  Thanks

Hello everyone! I am trying to use images from onedrive on dreamweaver. I hover over the image code and it appears. If i try to change the file it reccomends which file or image to use. However, on the main display, the image is not being shown. I would like some assistance with this if anyone can help me.  

I'm currently running Dreamweaver 2020 on my microsoft surface laptop 3 and it is so slow it is basically unusable. I have tried the following: - deleting the temp files folder.- running in standard mode not developer.- running in Design mode not live.- disabling code hints.- disabling site cache.- disabling linting.My laptop specs are: Processor: AMD ryzen 3550U 2.10 GHz Ram: 16GBWindows 10Is there anything left to do other than un installing this app and using another text editor? thanks   

Cuando escribo codigo html, php o js en Dreamweaver y aparecen las sugerencias de codigo, muchas veces esas sugerencias se quedan congeladas y no desaparecen de ninguna forma e impide ver parte del documento. Incluso si cierro el programa, las sugerencias se siguien viendo en la pantalla, realmente es molesto y quisiera saber si hay alguna forma de solucionar este error. Google Tranlation:When I write html, php or js code in Dreamweaver and the code suggestions appear, many times those suggestions freeze and do not disappear in any way and prevent seeing part of the document. Even if I close the program, the suggestions are still showing on the screen, it really is annoying and I would like to know if there is any way to fix this error

I can't make any edits in live view 😞 I cannot place my cursor in the text,  the Element Display tabs do not appear. Any recs on how I can fix this?  

I'm coming from CS3 where I was used to seeing the files on the right to 2020 where they are now on the left. I've really tried to get used to the files being on the left, but still haven't. Is there some sort of setting that I can make it be on the right, and see the work space to the left?

How can I create .asp pages and have asp code writing support in dreamweaver? Thanks

In older versions of Dreamweaver there were simple pull down menus to set text size, font, size change, color, etc  I've just upgraded to Dreamweaver 20.2 and those things, which used to be easy now seem to require me to edit my tags by hand.  What am I missing here?  I've tried right-clicking with text selected and there are some menus (e.g., font) but nothing for size, color, and alignment, the ones I need the most.  Any help would be much appreciated.

Hi All - I don't use Windows often, but I'm hoping someone has come across this before and may have a solution.  I have a Win 10 computer that the CC App crashed and wouldn't update anything anymore. So I tried to uninstall and it failed.  So I used the cleaner tool and proceeded to re-install the Cloud App.  But everytime it gets stuck whether I download the package by instelf or if I try to download an app (ie: Dreamweaver) with the package.   Also I did check the log file at C:\Program Files(x86)\Common Files\Adobe\Installers and the log doesn't have an error as is like it was frozen too.   Any thoughts about what could be done to help get the installer moving again?

Hi. Is there any way to paste a block of text into Dreamweaver and then format it to automatically add <br> tags after line breaks or double line breaks?Thanks!