Questions

Long story short I have lost my entire local light room catalog (3500 images) after deleting the app. I purchased more cloud storage just before this happened but the catalog did not fully upload as all these images now sit unusable in the sync issues folder. I am wondering whether there is any way of reinstating these images without deleting and re uploading as I want to retain the edit settings. The alternative would be to try and recover the deleted catalog on my laptop (there is no backup) if anyone has any suggestions I would be very grateful. 

Ich bearbeite mehrere Bilder im .CR3 Format mit Lightroom. Eines davon öffne ich mit Photoshop um den Hautglätten Neuralfilter zu verwenden. Nach ausführen und speichern schließe ich PS. Nun bin ich wieder in LR, jedoch hat keine Änderung stattgefunden / wurde nicht übernommen.

Versie 9.2 maakt export files aan die niet goed werken op websites en bij druk in kranten. De geëxporteerde foto's zien er op het oog goed uit, maar vertonen vlakke blauwige foto's bij publicaties op web of krant. Het lijkt erop dat ze met colorspace ProRGB worden geëxporteerd ook als je een  andere kleurruimte hebt geselecteerd.Ik ben als workaround teruggegaan naar v9.1, waar alles wel goed werkt.Ik sluit tweemaal dezelfde foto bij. Op het oog hetzelfde maar de 9.2 doet hij het dus niet in krant of web. Voorbeelden van de web en krantplaatsingen ook bijgesloten.Erik

When I import new files from an sd card or on computer, it seems like about 30-50% of the photos just fail to load and disappear on the grid view, I can’t interact with the photos, edit them, or view them. I think this is an Adobe Lightroom issue because Adobe Lightroom Classic loads these photos just fine, there’s nothing wrong in the metadata, and I don’t see any sign of corruption in the files. Some of the photos tend to disappear and not show up at allWhen I try to click on them they don’t show any properties or anything to editOn Lightroom Classic, I don’t see this issue at all. I imported one file that worked fine in Lightroom, then one that didn’t work in Lightroom 

When I go to move a slider like contrast for example, I typically click and hold somewhere on that slider that doesn’t cover the circle so I can see where it’s moving, but when I let go now the value jumps usually by around 5. So I click and drag with my finger starting on the line (not the circle), I drag my finger to let’s say +6 contrast, and when I let go it jumps to +11. Doesn’t happen when I click and hold right on the circle but is just a little annoying that how it used to be.

Dear team, I’m a subscription members for Lightroom Mobile (IPhone user), and every time I'm trying to download the mask for select subject and select Sky and error occurred and as of now I'm unable to use this masking tools Phone: Iphone12Pro Max iOS V 15.2  lightroom V 7.2.0 note: I have tried already, clear cache, uninstalling and reinstalling and logging into Adobe account but nothing seems to work.   Hope someone can help   {Thread title has been updated}

Sometimes Lightroom (NOT Lightroom Classic) doesn't see a face in a photo. How can I point out the (obvious) face and then be allowed to tag it? Seems odd that it sometimes sees tiny faces in the background and misses obvious ones in the foreground. Sometimes it sees objects as “faces,” but then misses clear people with two eyes, a nose and a mouth. Ultimately, I would like to take these name tags and embed them in the image as metadata, but I have to get the tags on them first. Puzzled because this seems like such an obvious need, since facial recognition is never going to be 100% accurate.

In previous versions, using the tab key on the info page would move your cursor down to the next line. For example, after entering the Location, pressing tab would save what you typed and move the cursor down to the City line. It now has no response. I am using Lightroom Cloud version 9.2. 

my subscription on Lightroom Premium cannot be used. i have purchased the Lightroom Mobile Premium, but then it says "account expired" and cannot be restore. as i wanted to restore, it says "purchase restored" but nothing ever changed after that. it just the same. i still cannot use the premium one even i have already paid it. it happens last in 24hours. it just ruin my day, my time and everything. hope that this issues will be done perfectly please. 

Hi Team,I am currently trying to hit the Lightroom API from Salesforce to apply tags to images and videos.I am sending the below payload to attach tags to a particular asset. However, the tags are not getting applied even though the API call is going through.Please find the method I am using:public static void applyXmpTags(String assetId, List keywords) {if (String.isBlank(assetId) || keywords == null || keywords.isEmpty()) return;String now      = getAdobeTimestamp();String bodyJson = JSON.serialize(new Map<String,Object>{'userUpdated' => now,'xmp'         => new Map<String,Object>{ 'dc' => keywords }});}Payload being sent:{"userUpdated": "","xmp": {"dc": ["tag1", "tag2"]}}If anyone has faced a similar issue or has any suggestions on how to get the tags applied successfully, please help me with the solution.Thanks in advance.

Hello adobe engineers and team!  I have a iPhone 17 pro max currently, and I just realized that no matter what I do in lightroom mobile (latest 11.2.3 for android and 11.2.2 for iOS) when editing the full res ProRAW or normal binned ProRAW dng, it always seems to be editing the embedded jpeg of it instead of the true raw.  For reference, I used this app here: https://github.com/AJ732101/DngMaster_Public  on my Oneplus Open running android 15, that DNGMaster app actually allows editing the true raw portion of the ProRAW.  In that app, when you open it, and edit, you can see much more fine details and adjustments; where as in LRM even when you turn down the sharpening, noise reduction and color noise reduction, it still looks clumpy, blotchy, and not proper.   The app mentioned above uses Libraw and OpenCV vs the android preview, which seems to somehow locks into the metadata of the jpeg portion of ProRAW.  I will attach the dng I used so the team can experiment on their end using LRM an

Just installed from the App Store I opened it. Everything works fine but when it comes to photo import, I could not see any photos on the local files. And when I try the own light tutorials, these photos could not be showed correctly on the left side. 

When import dng to LR on iPhone, sometimes the color shifts locations within the image. Not that the color values change, but all color can shift to a different part of the image, leaving the original location grayscale. (See included image). This does not happen for all imported dng’s, just a few seemingly at random. See image below. Anyone experienced this + know how to fix it?   

Whenever I try to use the “Archive Album Locally” function, it stops after copying some photos and does not finish. I tried to archive on a NAS, but the same happens when I use the SSD of my computer. It seems that small albums (less than 50 photos) are not affected. While I need to restart a few times for albums of a few hundred photos, it appears to be impossible to finish the archiving process for albums of more than 1000 photos. Is this an issue in Lightroom, or can I try something to solve this?

Phones such as the new Samsung S26 Ultra appear to save their jpgs from the 50mp camera in DCI-P3 colourspace.  When opened in photoshop they appear correctly toned as they do on the phone screen but in lightroom (where we do most of our workflow) they appear oversaturated and over exposed I assume as it incorrectly interprets them as sRGB. Since Photoshop already correctly views these I am wondering why Lightroom does not. It seems that it does correctly identify them as HDR but not as SDR.

Hello,​I'm reporting a bug regarding the HDR export capabilities in Lightroom for mobile (Android). Currently, it is impossible to export an edited HDR photo as an HDR JPG, despite the app supporting HDR editing.​The Issue:When you finish editing a photo in HDR mode and go to export it, the "HDR Output" toggle is completely missing if you select JPG as the File Type.​However, if you switch the File Type to the mostly unsupported and useless AVIF, the "HDR Output" toggle appears and functions as expected. Since modern Android devices fully support HDR JPG viewing, this feature should be available.​Contradiction with Official Documentation:What makes this more confusing is that Adobe's official help article explicitly (and falsely) claims that JPG is currently supported for HDR output on Android.​According to the article Edit HDR photos in Lightroom for mobile (Android): ​"In the Export settings, specify the Image Type and check the HDR Output box. Supported non-Raw HDR file formats incl

I am about ready to throw in the towel on this crap. I’m on the newest update as of today. This has increasing gotten worse and worse with the BUGS!!! Masking never selects the subject correctly anymore, my removal tool has TOTALLY stopped working and just other small bugs. This all came to head trying to separately get these images done from a shoot Thursday. All I have been doing is trouble shooting and wasting my time. I’m SUPER angry, I can’t get a refund as I’ve had it too long and WHAT a waste of money!!!

Import new photos with the latest Lr Version on iPad Inside a new album, filtering by Camera shows “No result found” Going into the “All photos” master album, the camera are shown in the filter menu. However, none of the new photos are shown, only old ones.Lightroom iPadLr 11.2.2 0A0E34/233

Je trouve que vous pourriez aller plus loins avec l’IA. Par exemple :- avoir la possibilité d’écrire ce qu’on attends comme changement et qu’il le fasse lui-même. - avoir la possibilité d’avoir un agent qui nous apprend quelle réglages faire pour obtenir le résultat qu’on veut ou qu’il faudrait. - être plus intégré dans les filtres recommandés car les propositions sont souvent assez nuls, donc plus analyser la photo et faire en fonction de nos préférences, des photos existantes similaires, etc. - ajouter du contenu, comme agrandir l’image, mettre du maquillage, ajouter un fond, des objets, etc. - faire du upcycle IA pour les photos de très mauvaise qualité 

Like the title said, it says no exports left, but it won't let me sign-in either. It's just perpetually stuck with the loading symbol no matter what I click. I already force stopped the app and cleared my cache repeatedly. I cannot export anything and it has been like this for 2 weeks now. It is Lightroom Mobile for context, if that matters. Is it a bug, or should I just delete it and reinstall again? Thank you for your help 

Generative AI removals are taking SO LONG to process, and often end with an error that says “Could not remove. Something went wrong. Please try again.”This is happening almost every time I try to remove more than one spot at a time, but even one spot is taking forever to load.

After opening new photos in Adobe Lightroom (not classic) locally, I rate them.  LR is showing I am rating them 5’s but then when I’m done and I filter on 5’s it is only showing a few of them.  Even if I close LR and reopen it.  This is very frustrating and a big waste of my time.  I have plenty of ram and storage and my reading off of a regular hd, not an SSD. I am so close to jumping ship off the Adobe train.  Anyone help with this. Can’t figure out how to contact Adobe.  Thanks in advance.

Everytime I try to use ‘Denoise’ on multiple photos, it works. Then i try to view those photos and i get hit with this message ‘Some AI settings need to be updated...’ click ‘Update All’ and NOTHING works.

Arrow Keys Stop Working Mid-Session within Lightroom Mac Additionally, the Export request won’t export with edits.