Questions

Hi I have no access to potoshop beta on my creative cloud in all apps or in pre releases it only illustrator. The region is Georgia creative cloud is up to date  

This latest beta version of Photoshop is totally useless. When I try to use one of my actions, Photoshop completely freezes, I have to force quit & loose everything I had done previously. It happens everytime.  

My original post from a while back seems to have disappeared (or is not searchable at least).Problem: any use of the remove tool causes very long lag (10-15 sec) no matter how tiny the area covered in the remove tool stroke.The results are usable but the tool itself takes too long to use in a regular workflow. This isuue was resolved by installing the 24.7.0 beta for about an hour before it reverted back to the laggy behavior.These are the things I have tried without success:Restting preferencesReverting to previous betaHaving only the layer being worked on visibleSwitching between the two modes (commit after each stroke or not)Switching from sample all layers or not.Deactivating Native canvas and restartingGranting full disk access to Phooshop beta.Using different brush characteristics (build up or not etc)This is so furstrating as the results it returns are fantastic, just that I have to wait forever for each stroke and that is not possible in my workflow.Workaround so far is to disa

Hi There, Since last night i have not been able to use the Harmonize tool in Photoshop Beta. An error is showing with Check internet, while my internet is same as before with no changes. Please let me know.

Using 26.11.0 on Windows 11, Geforce RTX 4070.The first time I open an image and use color replacer, it works. I can change colours from, say, red to blue by either typing in a number or using the slider. When I try doing the same on another image, it freezes completely and I have to close the program using Task Manager. Opening Photoshop again, I can occassionally edit again, but more often than not the problem will occur repeatedly until I reboot the PC. I have read posts where this happened on a mac 5 years ago. I don't have Rulers enabled, I've turned off Multithreading, tried resetting as Photoshop starts and I've tried moving the window away from the image window. Nothing helps. ThanksDarren  

Hello,I am from Germany and I am communicating via a translator. I used an existing calendar page as a template in order to customize it.The top part should get a metallic effect with a Gradient Map Adjustment Layer – a bright stripe in the center that fades outward into the selected color. The issue: when I apply the Gradient Map as a Clipping Mask, it does not behave as expected. Instead of being restricted to the layer boundaries directly below, the gradient is calculated over the entire canvas and then only displayed as a cropped portion inside the clipped object. In other words: the Gradient Map ignores the clipped layer’s dimensions and always applies globally to the whole document. This prevents me from creating the intended metallic effect within the element’s boundaries.

Les points blacns, noirs et gris dans les reglages (courbes, niveaux etc...) ne marchent pas

There is some sort of bug, blocking me to use the brush, or save, anyway I still can work in the layers

Bonjour, Depuis quelques jours la fonction "remplacer l'objet" ne marche plus sur photoshop Bêta.. je voudrais remplacer un vêtement par exemple par un autre mais il me demande "passez au modèle Firefly 3" et pourtant c 'est celui-ci qui est coché... je ne comprend pas ! Quelqu'un sait de quoi il s'agit? Merci 

I'm using the 26.11 version of Photoshop (Beta), since previous versions I have experienced something annoying, when I select an adjustment layer that has text fields, for example Hue and Saturation, the first text field, in this case the Hue, is focused and I have to press ESC to remove the focus. This gets annoying because if I want to copy an adjustment layer or perform different actions with the keyboard, I have to keep pressing ESC, otherwise it won't work. For example, if I select an adjustment layer and press Ctrl+C, I'll be copying the value of the first text field in that adjustment layer, not the adjustment layer itself.

 Product & Version:
Adobe Photoshop Version: 26.11.0 20250810.m.3177 655ab8a x64 (beta, PublicBeta)OS Version:
Mac Sequoia 15.6GPU:
Intel Iris Plus Graphics 645 1536 MBSteps to Reproduce:1. Opened image 4000px width, 4000px height, 300ppi, Square Pixels 1.0).2. kept 1 rasterized layer.3. Apply Filter → Parametric Filters → Embroidery (default settings).4. Output appears pixelated/noisy instead of showing stitch detail.5. Happens regardless of Smart Object status, image resolution, or pixel aspect ratio.6.Expected Result:
Clean embroidery stitch effect with visible thread detail, as shown in Adobe’s feature demos.Actual Result:
Output is heavily pixelated, with blocky artifacts replacing the stitch pattern (see attached screenshot).Troubleshooting Tried:* Verified image resolution (2000–5000px range) and ppi (72 & 300 tested)* Pixel aspect ratio set to 1.0 Square Pixels* Tried rasterized and Smart Object layers* Disabled all other Smart Filters* GPU acceleration enabled (Pr

I open an image in LrC do some editing then open in Ps(Beta), edit in there and save back to LrC as a PSD. SEelecting the image in LrC from the already open winmdow, either crashes LrC or makes the whole PC crash. I get the Adobe Crash Error message and duly report, but nothing has changed.   Any advice people?

PS béta 26.11.0Les options ont étés déplacées en bas de la liste ?  

1- Le style n'est plus modifiable dans propriétés2- Exposition dans le menu Image/Réglages ne fonctionne plus   Photoshop (Beta) Version 26.11.0Windows 10

Ao tentar baixar o photoshop beta toda vez que terminava de baixar dava erro, depois conseguiu avançar um pouco mas agora aparece esso erro também . Já tentei outras versões mas acontece o mesmo!Qualquer outro aplicativo normal está baixando normalmente. 

Lorsqu'un lumière forte ( ampoule, lustre ) se trouve sur la photo avec des flares et glares, l'outil supprime tout, la source de lumière y compris.

BonjourPhotoshop beta ne se lance plus depuis 2 jours! Mon compte est à jour et inchangé.Photoshop 2025 fonctionne normalement.Quel est le problème ?Je vous remercie.Yvan

Seit 1. September stürzt  Photoshop (beta Version 26.11) bei jedem Druckauftrag ab. Ich kann praktisch nichts mehr ausdrucken. Bei anderen Programmen (Lightroom) geht das Ausdrucken problemlos.Windows 11, 64 Bit Weiß jemand näheres dazu?

Estimado equipo de Adobe:Soy fotógrafo profesional y usuario de Photoshop desde hace años. Hoy quiero expresar mi gran decepción con la calidad actual de la IA generativa integrada en Photoshop. Los resultados que estoy obteniendo son mediocres, irreales y muy lejos del estándar profesional que ustedes mismos ayudaron a construir.Antes, podía generar contenido aceptable, con referencias, coherencia y utilidad para mis trabajos. Ahora no solo han bajado la calidad visual, sino que además han restringido el uso de imágenes de referencia, lo cual limita gravemente el control creativo.Los resultados son absurdos en proporciones, texturas, anatomía, iluminación… y aún así, los créditos se consumen. ¿Cómo es posible que se penalice al usuario por un producto que no funciona correctamente?Entiendo que Adobe apuesta por una IA “segura”, pero eso no puede significar una IA inútil, caricaturesca y frustrante. Estoy seriamente considerando mover parte de mi flujo de trabajo a otras plataformas qu

I missed the Beta button for some reason: 

Hey y'all,I've been reading a lot about using third-party AI models inside Photoshop Beta, but I can't seem to find them. I have the newest version of Photoshop Beta 26.11 m.3196, tried uninstalling - restarting the computer - installing again, but I'm still "stuck" with the Firefly models 1 and 3 (see image attached). I have a work account - is this something the administrator has to take care of?I don't know what more to do, to get these models inside the program.Any ideas?Thanks in advance for your time!Cheers,Flyp

Hi everyone,Since two days ago, Generative Fill has stopped working for me in Photoshop Beta (it started on version 26.9). I keep getting the error message: “There was a problem with your request. Please try again later.”I updated to the latest version (26.11), but the error is still there. I noticed something interesting: in the new version there’s an option to switch the Firefly model. If I choose Firefly 1 (2023), everything works fine. But if I use Firefly 3 (2024), I get the same error every time.Has anyone else experienced this? Is this a known issue with Firefly 3, or something on my side (network, account, credits, etc.)? I’d really appreciate any advice, because I specifically need to work with the Firefly 3 model.Thanks in advance!

Reference image icon is show but it appear as gray button. So I cannot attach reference file. how can I solve?

Hi everyone,Since two days ago, Generative Fill has stopped working for me in Photoshop Beta (it started on version 26.9). I keep getting the error message: “There was a problem with your request. Please try again later.”I updated to the latest version (26.11), but the error is still there. I noticed something interesting: in the new version there’s an option to switch the Firefly model. If I choose Firefly 1 (2023), everything works fine. But if I use Firefly 3 (2024), I get the same error every time.Has anyone else experienced this? Is this a known issue with Firefly 3, or something on my side (network, account, credits, etc.)? I’d really appreciate any advice, because I specifically need to work with the Firefly 3 model.Thanks in advance!

Is it possible to copy and paste a selection?  Keith