Questions

Photoshop ne detecte plus les sujet dans le mode selction

firmware .2727 when trying to have software select subject:error "can not complete your request  a pop up says Subject classifier model not loaded correctly.  

I am not sure this is a bug becasue I think it has been occuring for a while.  When I use Generatve AI, I only get one version for the result instead of the expected three versions.  I am searching the internet for a solutions, but have not found it yet.  This is very frustrating, especially considering the high cost in credits to use some Generative AI models.Also, I am having occasional Workspace issues.  I occasionally lose the keyboard shortcut for  these issues, even if I go back to prior Workspace again.

27.6 20260404.m493Steps to reproduce:Select any OTF font. Type a dash followed by a word of your choice with no spaces. Example: “-Hello”. Apply any degree of stroke via styles. Add a space in-between the dash and the word. Photoshop should have froze if steps were followed correctly.

La opción “Dispositivo” as seleccionar la herramienta Quitar aparece como no disponible, a pesar de que mi sistema cumple con todas las especificaciones exigidas para activarlo.Mi sistema: Versión de Adobe Photoshop: 27.7.0 20260514.r.11 fa4476d  x64 (final: Release)Número de inicios: 1053Sistema operativo: Windows 10 64 bitsVersión: 10 10.0.19045.7291Arquitectura del sistema: Intel  Familia CPU:6, Modelo:7, Versión:1, AVX2, AVX-VNNI, HybridCPU(8:8), HyperThreadingCantidad de procesadores físicos: 16Cantidad de procesadores lógicos: 24Vel. del procesador: 3418 MHzMemoria incorporada: 32548 MBMemoria libre: 20864 MBMemoria disponible para Photoshop: 25015 MBMemoria usada por Photoshop: 70 %Controlador de bloqueo: AdobeDCX Version: 9.22.0SAM SDK Version: 15.1.0ACP.local Status: - SDK Version: 5.11.0 - Core Sync Status: Reachable and compatible - Core Sync Running: 7.8.10.1 - Min Core Sync Required: 4.3.66.28Versión de SDK de cliente de edición en directo: v6.1.1Adobe Firefly: Utilice cua

Hello,   I’m experiencing a recurring bug in the latest version of Photoshop (Beta) on macOS.   When I add a Hue/Saturation adjustment layer, the Properties panel does not display the usual Hue, Saturation, and Lightness sliders. Instead, it only shows: “No mask selected” — even though the white thumbnail (the adjustment layer, not the mask) is properly selected in the Layers panel.   This bug does not happen in the stable version of Photoshop, nor in a different open document within the same session. Steps to reproduce: 1. Open or create a new document 2. Add a Hue/Saturation adjustment layer 3. Click the white thumbnail of the adjustment (not the mask) 4. The Properties panel incorrectly shows only mask options (“No mask selected”) System details: • Photoshop Beta version: 26.6.0 • macOS version: 15.3.2 • Chip: Apple M3 Pro

I tried to sharpen an image and was told that you have “issues” with the image and can’t continue.  What are the issues? 

Photoshop Beta current version 27.9 m.3562 HSL panel not show correct color in circles

i can't find it. I turn it on and off view the "window" menu but it's no where to be found. I've opened and closed PS several times. 

The View/Proof Set-up is allowing a profile to be selected (in this case Working CMYK) but the Proof Colors menu item doesn’t act globally and switches itself off between every image. I’m not sure what Default profile it’s imposing but it’s very washed out and looks about 4 stops over-exposed. I must manually click the Proof Colors back on for every subsequent image. This certainly wasn’t the behavior in the previous version.  

Hi Adobe Team, I’m facing a small but very frustrating glitch in Photoshop, and I wanted to bring it to your attention. Whenever I’m using the Move Tool, and I try to switch to the Brush Tool by pressing B on my keyboard, Photoshop jumps to the Brush Tool for a split second and then immediately switches back to the Move Tool on its own. This keeps happening repeatedly, and only after trying 3–4 times does the tool finally switch properly.This issue is interrupting my workflow and becomes quite irritating, especially during long design sessions. I kindly request you to please look into this bug or guide me if there’s any fix or setting adjustment I should try from my side.

iPhone17 Pro MAXでPhotoshopアプリで画像選択し、AI機能を使用する際、「Photoshop AI の使用状況」の画面が出てくるが、スクロールできないので最下部のボタンが押せない。「18歳以上である必要があります」のした下のボタンが押せない。 ・端末の電源を落とし再起動、ネットワークの再接続 ログアウト/ログイン・端末自体はの容量は十分にある・設定アプリを起動・アプリの再インストール上記を行っても改善されない。 

In Photoshop beta version 27.8, when I create a layer and work with the stamp tool, a mouse cursor constantly appears. I've tried everything but the problem persists. Please help me figure it out.

  We are excited to share that Generative Upscale is now in Photoshop Beta! Powered by Firefly, you can now increase the resolution, preserve detail and remove artifacts while increasing the size of an image. Functionality is limited for this release as we continue to test and refine the model, but we are eager to learn from users early on! Some things to note about the feature:   Size and ratio limitations: Max output is currently limited to 4096 pixels and/or a max 1:4 ratio for width and height. Low-resolution: This model is best suited for low resolution images Output: Output is limited by size and ratio. If your projected output exceeds these limits, the button to upscale will be grayed out. Otherwise, upscaled images will be output to a new document. Note that if an image’s projected output is beyond the max limit, try using Image Size (Image > Image Size) to reduce the original size of the image before upscaling Credits: in the Beta period, Generative Upscale will

Macintosh version, Tahoe 26,5. 27.8.0 Beta, 27.7.0 Release version

Generative fill doesn't work (grayed out) when I select the entire workspace, either with the mouse or using Command+A.If I manually select an area, then it works correctly.Mac M3 pro, OS Tahoe 26.5 (25F71)Examples:with “ALL” selected not “ALL” selected 

I’ve already searched the Creative Cloud app and the Adobe website, but Photoshop Beta never shows up as available to install. What’s the best way to sort this out?

Photoshop Beta 27.8.0 - Decontaminate Edge IssueOn this release, I am having issues enabling decontaminate edge in the refine mask window.  Output is set to create a new layer with layer mask.  I have tried all other output options with the same result.  Regardless of the settings I adjust in the refine mask window, decontaminate edge remains greyed out.  This was not an issue on the previous versions.  Has anyone experienced this issue and/or do you know of a solution?  

Brightness is blown out in PS Beta...Fine everywhere else.

Until recently my workflow has beenReduce to 1024 pixels on the long side (Is that still the limit?)Select AllCtrl Alt B to open Generative Filluse a prompt to change the image.  Since installing 27.8.0 m.3553 I now see this Prompt to edit  in the CTB and Ctrl Alt B is greyed out.Clicking the Prompt to edit button opens the Gen Fill window in the CTB, and I can’t access the larger Generative Fill dialog.   Am I missing something?  I usually use long prompts and that larger window is useful.Does Prompt to edit have any significance other than taking us the Prompt dialog? 

我的PS在打开图进入ACR是正常的，再次打开浸入PS，就是亮灰色，啥原因

Mijn photoshop wil niet meer openen in Creatieve Cloud. Hij heeft wel gewerkt, alleen gebruik ik het bijna nooit en weet dus ook niet sinds wanneer hij het niet meer doet. Als ik erop klik opent het beginscherm en begint hij vanalles te laden. Alleen na lezen kleurinstellingen stopt hij. Ik heb al vanalles geprobeerd maar niks werkt. Lightroom werkt wel goed.

일러스트, 에프터이펙트 모두 정상적인 속도로 작동하는데에프터이펙트보다 훨씬 적은 용량, 간단한 작업을 하는 포토샵이작동이 거의 안되는 수준으로 느리네요.한 컴퓨터에서만 그런것도 아니고 여러 컴퓨터에서 동일한 문제가 발생합니다.갑갑해 죽겠네요.무료 프로그램도 아니고, 월결제로 돈 받아먹으면서 오류 개선할 생각은 도무지 없는건지쓰면 쓸수록 소비자 기만행위라는 생각밖에 들지 않습니다.게다가 프로그램 오류에 대한 개선은 진행할 수 없다고 하네요??뭔 기업인지 이건 ㅉ

(MacOS) Beta 27.8 version of PS is arbitrarily changing the opacity of the Dodge/Burn/Saturate tools. I will set them to my personal default of 20% (using the ‘2’ key) and then when switching between tools or using another tool and then returning, it will have switched itself to a weird 55% opacity.  (This bug has been observed as “intermittent”) I pretty much only use the Beta version of PS and rarely have issues. This is the 2nd bug spotted today in 27.8. 

Hi, i just subscribed to Photography plan yesterday and looking for Photoshop beta in the creative cloud beta apps but i didn't found it . Is it normal ? (Windows 11, Creative Cloud 5.10 installed twice)   Thanks