Questions

Hi, So I have noticed that recently Photoshop added a new feature and I'm not sure that it only bothers me, but I don't find an answer where to turn this off if possible. Before when I hovered layers in photoshop I don't recall it would highlight  the layers, only when I clicked on them.Now suddenly it's highlighting the layers I'm hovering over, which makes it very confusing to see which layer I'm actually working on.The layer is blue when hovered.And it's grey when selected with clickCan I turn this feature off?It's beyond annoying, it slows my work down and I don't wish to get used to it as it's just a distraction.Processor Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz 2.59 GHzInstalled RAM 32.0 GB (31.8 GB usable)Device ID 27756CCC-6C04-49DB-A87F-479753B83DCCProduct ID 00330-80000-00000-AA836System type 64-bit operating system, x64-based processorPen and touch Pen supportWin 10Thanks for the help!

I am using the latest edition of Photoshop beta. It seems to me that every time I open the program it is a different size on my screen. Worse, it will not faithfully reproduce any workspace I have established. Disturbing also that an Adjustment now occupies the entire right pullout panel of the program. So if I create a Layers adjustment but decide to reset, I have to go all the way down the right side of theprogram to find this function. Time consuming!

In photoshop beta the generative fill feature or text to image no longer works as and responds with 'The service is not responding. Please check your internet and try again'  My internet is fine, the feature works fine in non-bwta photoshop on my machin. photoshop version: 26.0 m2787macOS Sequoia 15.0 

He intentado usar degradados y a cada rato me detiene diciendo que hay un error en el programa. No me deja hacer degradados como antes dentro de una selección. Ojalá se pueda solucionar rápido. Muchas gracias. 

Hi, I am seeing very high memory usage on this Beta version. Editing simple images with only a few layers. I have edited 5 images today, and with only a couple of image tabs open now,  the memory usage is 7.57gb and climbing. I have had warnings a few times for exceeding memory., That I have never seen before.Mac Mini M2 - Latest OS

Hello Beta Team,The Remove tool replaces areas of your image with realistic and relevant content.  Use this tool to remove any distracting regions or elements, no matter how small or large. Simply brush this artificial-Intelligence-powered tool over objects and people to make them disappear… as if they were never there.  Complicated backgrounds and structures, such as fences or edges are seamlessly completed.                                What we want for you:This should seem like the magic you expect out of Photoshop!For our experienced users and those with a discerning eye, our goal is to reduce or eliminate the clean-up after the fill. You should be spending less time repeating a fill for better results. You should also not need to clean-up by switching to another tool, such as the Clone Stamp. What we want from you: If you hav

I cannot update to the latest version of Photoshop BETA? It stops at 1% I am updating in Creative Cloud on my Macbook Air It has a green check mark saying It works on this Device??? Help......?

Hello, I have recently noticed that when I use the latest Photoshop Beta 26.0.0 and expand the image via crop tool (using either Content-aware fill or Generative Expand), I get a pixelated picture, and there a noticable decrease in quality after this action.Could you please advise me on how to fix it?That would be a great help.Thank you.Anna

Removal tool, with or without using AI does a terrible job removing lattice steel transmission towers. The new Find Dsitractions -wires and cables does a good job on wires but ignores the towers.I am generally forced to use clone stamp or or keep trying rtemove tool...but it tends to make things blurry.Also, generative  AI does not produce vegetation at high enough resolution for me to use with hi-res photos.

Hello, for the last two weeks, the background remover feature is not working in Photoshop (web).

Beta 26.0.0I have been having an issue with simple key board shortcuts like like x not working properly. When I'm looking to switch between black and white swatches and press x - I ether get an error message saying - can't complete due to program error Or I'm now getting a random gradient applied ( and a lot of it) to the mask when I was using the paint brush tool. Is anyone having this issue ?Same issuue with Color range - cant use eye dropper - same gradient issue.   Issue will sometime goes away without restarting the program but most cases I need to restart. 

This is a change!! And not good. I work in Bridge/Raw. Every time I open a photo to edit from Bridge to Raw and then save it, Photoshop opens and takes over. I have to click off the Photoshop screen and go back to Bridge. THIS IS A CHANGE AND EXTREMELY ANNOYING AND SLOWS DOWN MY WORK!!

Sometimes, seemingly at random sometimes when I move a layer inside of an artboard, it will make other layers pop out the artboard or the layer I move will pop out of the artboard. It gets frustrating having to move everything back into place... Especially because working in artboard makes PS move slower.  Mac OS 14.5 (23F79)25.11 Beta

I'm not sure if this is a bug or intended behavior. I have an image with a small area that was left transparent during pano stitching. On the opposite side I have another, larger area that is transparent, as well. I decided to use the remove toold to fill in the small transparent area instead of content aware fill since I had the remove tool in use. I hightlighted the small area with the tool and hit enter to do the remove. The tool mode was set to Auto. It took 30 or so seconds to complete, which seemed odd. When I moved to the larger transparent area, it was already filled in. ???I stepped back through history and repeated what I had done and got the same results.Doesn't seem like it is intended behavior to me.  Adobe Photoshop Version: 26.0.0 20240925.m.2787 1c408e0 x64Number of Launches: 141Operating System: Windows 11 64-bitVersion: 11 or greater 10.0.22631.4037System architecture: Intel CPU Family:6, Model:7, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SS

When any of the round  brush cursor ( also the new selection brush) is bigger than a ceratin size on screen ( not in pixels but the actual size i has on the screen )  it refuses to move.It's certainly related to the cursor screen draw function because you can move again if you reduce the size of the brush OR if you go to cross hair mode with maj Apple M1Macos sonoma 14.6.1

I'm trying to use generative Expand to create a background for my photo.  I keep getting this box around it with pixels and then the generated image further out.  In the preview variations it doesn't show the pixels.  What am I doing wrong? 

compre el plan de creative cloud y no me deja jusar photoshop sin volver a hacer una compra

I got this error on photoshop version 25.12When loading extension panel

Adobe Photoshop (Beta) Generative Fill not working after MacOS Sequoia update.Error: "The service is not responding. Please check your internet and try again." It is caused by the Network Firewall.Network FirewallAdobe Illustrator, InDesign and Photoshop all have incoming connections blocked and have no toggle switch to change it. Switching off the Network Firewall resolves the issue but this is just a temporary fix.

Since the update today v26.0, any images that are being edited are moving - slightly jumpy.Using Windows 11.

Hi, I can't download photoshop beta.The beta apps option is not visible on the left in my creative cloud.How to get it?Is it possible Adobe removed the ability to download it? Big thanks everyone 

Bonjour,Lorsque je veux modifier une photo de lightroom vers photoshop béta et que je souhaite utiliser le nouvel outil "supprimer", un certain temps s'écoule et photoshop béta se ferme systématiquement.Je ne peux même pas aller sur l'onglet "distractions"....Mon système et mes applications sont à jour. J'ai désinstallé photoshop béta et l'ai réinstallé.Rien n'y fait !Que dois-je faire.Merci de votre retour. 

I’ve been using Photoshop Beta extensively over the past few months, and I’ve developed an amazing workflow that incorporates generative AI for expanding, cropping, and managing elements. This workflow has been a game-changer for my projects, allowing me to delete or add elements seamlessly. However, over the last few days, I’ve noticed some significant changes that are impacting my workflow. The selection tool, which used to function perfectly, is now not selecting properly. It feels like my selections are no longer locked, meaning that any adjustments I make are affecting all areas of my image. This is causing a lot of frustration, as it disrupts the precision I need for my work. I’m curious if anyone else is experiencing these issues after the latest update. What has changed? Is there a way to revert back to the previous functionality, or are there any tips or workarounds that others have found useful? Looking forward to hearing your thoughts!

Hi Photoshop Beta Testers! We are so excited to announce the availabity of a new Gradients Context Bar. Let us know what you think or you run into problems!   To test out the Gradients Context Bar, make sure you have Context Bars enabled (Window > Contextual Task Bar or right click on canvas areas > Show Contextual Task Bar). Select the Gradient Tool and make sure you have "Gradient" selected in the Gradients Options Bar: With the Gradient Tool selected, click and drag to create a gradient. A new Gradient Adjustment Layer will be created, a Gradients Contextual Task Bar is shown.         

I tried the new Photoshop Beta 26.0.0.to try the 'remove distractions' tool in Remove, for wires. It began processing, then my PC suddenly had a BSOD with a WHEA-uncorrectable error alert. I restarted the PC and tried again, this time with the core temps being measured. The CPU temperatures became quite high and the PC shut off all together. I restarted and tried rendering some 4K footage. There was no problem with this.  Does this sound like a problem with my PC or is Photoshop trying to draw too much power to carry out the removal action? 1. Photoshop Beta 26.0.0. (latest as of 25th September)2. Windows 10 Professional - especially designed for high end work rendering in 4K)3. Open photo with wires --> remove tool --> distractions -->wires4. Expected : wires removed  : actual: PC crashes