Questions

On Beta 14.3.0 my workspace won't save properly, it keeps moving every time I reopen the application. Has anyone else seen similar issues? 

Is it possible to have a default selection for exporting media when it comes to selecting Entire timeline, In/Out etc. and crucially that default would carry over to AME when using it through either Queue or dropping a timeline into the render queue via dynamic link? I ask this because 99.999% of the time I want Entire Timeline. Most of the time I dynamically link my timelines in AME and drop a finished one in there and let it render while I start to work on the next version for the next newscast. Last night I didn't realize I had a rouge in point about 7 seconds into a 12-second reporter stand up intro. Guess what went on air in our newscast? Yup, a 4-second intro that made no sense. The default settings for both AME and the local export suck that you cannot pick "Entire Timeline" and it will default to that if that's your jam. In news we move fast and sometimes little things that should not have any consequence on the final export like a random in-point still sitting on the

So I've tried beta build 14.3 that has added RED SDK for R3D support and my RED files will actually play now, in the timeline but still not a smooth as it should be, I still get some dropped frames during playback. Footage still is a little jittery. I get 2-12 dropped frames during playback. I'm working with various RED footage up to 8K Resolution. Even when I drop the playback resolution to 1/4 or 1/8 it still doesn't playback as smooth as it did in premiere Pro build 13.1.5. Im available to provide any additional information needed to help.We're going in the right direction but we're still not there just yet. Getting RED playback as smooth as it was in v13.1.5 is the goal.my computer specs:iMac Pro3 GHz 10-Core Intel Xeon W processor128g ramRadeon Pro Vega 64 16 GB graphics cardEdit drive: Thunderbolt 3 raid ssd

The Beta keeps crashing on start-up. It appologizes (which is awefully kind), freezes, then closes.

Just started using the Beta version today and has crashed three times on me during the past hour.

Steps to reproduce:1. Set Hardware acceleration to CUDA in Project Settings2. Add video to track 13. Add a legacy title to track 2, after 3 seconds4. Play the sequence Result: After 3 seconds, when title starts, playback fails, and shows freeze frameExpected: Video should continue to play Workarounds: Turn hardware acceleration off (Software Only), then on again. Playback now works, but throws hundreds of Low Level exception errors  System infoNvidia K5100M video card, driver version 426.32 (no newer driver available)Application: Premiere Pro (Beta) v14.1.0.100OS: Windows v6.2RAM: 31.00 GBCPU Count (logical): 8

Happy to see that the new beta build finally addressed this issue. I'm sure some diehard users were asking for this for awhile. Especially like how it will acknowledge past projects as well. Very happy with this change as well as the new fixes and features the engineers have brought.

With the 14.3.0 beta once my CPU fan hits full speed it stays there. Closing Premiere Pro 14.3.0 does not help. I have to reboot my computer. Adobe 14.0 does not do it nor does DaVinci Resolve.I have an i9 9900KGigabyte RTX 2070Gigabyte Motherboard.32 GB of RAM

The result I got from the current version of Premiere Pro and the Premiere pro(BETA) when exporting is still the same. I am using my gaming laptop that has an NVIDIA GTX 1060 GPU and has my encoding set to hardware. however, when I press export, it is still utilizing around 16% of my NVIDIA GPU and 100% of my CPU. I also have my project setting set to GPU Acceleration (CUDA). I don't know what I'm doing wrong.

Currently there is an interesting but difficult behavior in nested sequences used across projects in a Production.   Add a nested sequence from one project file to another: the nested sequence "shows" as a nest, is added into that project's project panel, but no longer is connected to the original "nest" sequence. Changes in the original sequence do not ripple through to other uses in other project files.   Clearly, the addition of a nested sequence from one project file to another is treated something like copying a clip into a stand-alone project works, in that the nest is added to the 'new' project's file. Therefore apparently duplicating that as a "clip", except if the nest is double-clicked on the timeline you can still open up the original media clips.   But it doesn't behave like fully like a "nest" as you can't change the original nest and have that ripple through the Job.   Which seems to defeat much of the purpose of nesting to begin with.   Neil &n

Hi all,I try Premiere pro beta version to use Apple Prores RAW files with Windows10.I would like to modify RAW files settings, like white balance, or ISOS. Usually, there's "source settings" option with right click on RAW files (for example with RED raw files). But there's not this option with Prores Raw  files (or maybe with beta version, with all RAW files, I don't know).Do you know how can I change this RAW settings please ? Thanks a lot !

all shortcut dosen't work & i cant set any keyboard shortcut on the appthis a huge mistake

I have dual 2673 v3during export, premiere heavily uses only one cpu (80%), the other is used slightly (10%)

Anyone has an idea how to have "Beta" access to  Premiere Pro? How can I see "Beta App" on the menu? Thanks.

I've noticed especially when using Waves plug ins, that when I go to the control panel for that plugin, the interface is not redrawing to fill the breakout box, instead being about 10% size with a large red box filling the rest, and it's hard to maneouvre settings.Pic attached.Please fix it quickly.

  Very bad color reproduction, these are the same settings ProRes RAW and ProRes HQ       [Moderator note: please add images directly into your post via drag/drop or by using the picture icon of the formatting bar.]

Premiere Pro Optimize AMD CPUs

Hey guys I installed Premiere Pro Beta because of the ProRes RAW feature.Some things I noticed:Every second "Browse" function doesn't open a windows explorer window (for example to browse for a Lut or to import files), but premiere isn't responding like a window would be opened.If I have an Adjustment Layer above the ProRes RAW (HQ) file with a Lut in Lumetri Colors and I apply another Lumetri Colors effect to the video, the image will turn black when I adjust the sliders in the effect on the image.i need to put the exposure in the master to -2, to have the same picture as ProRes HQit doesn't put the system information in my clipboard, on reporting a bug Premiere Pro: 14.2.0.24GTX1060 (notebook) with Nvidia Studio driver 4422.92Intel HD Graphics 630 Driver v26.20.100.7263i7-7700HQ, 32GB RAM Beside of that, it's very stable

Hello,The new H.264 hardware encoding feature in the beta is incredible. The encoding speed using Media Encoder is now 4x times faster than before. This is huge. Now, the only thing left is for Adobe to support H.264 hardware *Decoding* added to the Mercury Engine. I use Panasonic DVX200 and Panasonic GH5 native H.264 4:2:0 files. When I try to play them back and scrub through timeline the CPU is still being used, and there is no GPU decoding support. DaVinci Resolve supports this. I think this would be a great feature to add for my workflow as it will literally eliminate the need of proxy files. Adobe engineers : can you add this just like Resolve? 🙂Thanks!

I have currently 3 machines (2 PC 1 Mac) under testing for the betareleases.On one HP Z8 I see , and have alerady updated a Version 14.3 build4 which is performing way better then the 14.2 build5 I have installed on another HP ZBookG5.Unfortunately I get no updates (beta) displayed on the ZBook in the ccdesktopapp. It only shows "open" on this machine, and runs 14.2b5 . Why is is there a difference, and how can I force it to update to the same 14.3b4 ?

Since so many developers are here, I'll ask the question. How complex is it on the Source-side Window to make the timecode window that you can manually input your timecode (on the 10-key keypad) include the option to display V1 source timecode from your original clip when it is part of a timeline?In the world of news I 1. Shoot time of day timecode on a Panasonic P2 camera. Those clips all go in order into one master timeline that I can leave up in the Source window and have everything from the shoot at my fingertips. The one thing I could do in Avid that I can't do with this workflow is select my Camera V1 timecode as the "source" so when I am given a specific soundbite timecode I can type it in and instantly be at my in point that matches my script. Small menu change, but it can save TONS of time for those of us that never have enough of it.Thanks!

Playing back media from the source or target windows, plays back at double speed. The exported timeline plays back at the correct time.

Hi All. This is my first post so apologies for any discrepencies in netiquette...I'm rockin' PP Beta version 14.3 (and the respective beta media encoder), in Windows 10 64/bit.. I have installed Apple's ProRes RAW beta which I found in this forum, and I'm still unable to import/ingest my ProRes RAW HQ footage taken off a Shogun which was linked to a Sony FS5. I rebooted after installs and everything. Also, when I look at the details of the error (as listed in the Subject Line), it tells me "ProRes RAW video could not be decoded. For more information, see adobe.com/go/proresraw ... which takes me to adobe's 404 error page.Any assistance in this matter would be greatly appreciated. System info    Application: Premiere Pro (Beta) v14.3.0.4    OS: Windows v10.0.18362, RAM: 31.95 GB, CPUs (logical): 8

making adjustments within the master file in ProRes RAW works good because its universal. but when i ad an adjustment layer and start a lumetri adjustment, the preview monitor goes black. if you play footage shows, when stopped is black. seems as though any render files (I havent rendered the sequence yet) or temp files go corrupt or something.

when in the master file when color grading. adjusting anything in lumetri where you double click on the slider to specific point, the lumetri scope goes black. to get it back you have to slide the slider again and you will see the scope again. Win 10 ProPremiere Beta CCCore i9 9900kNvideo RTX 280032GB Ram (All slots filled)