Questions

Typekit font (Source Sans Pro) is not rendering correctly when publishing site from Muse. I know not to expect it to preview correctly (sigh) but it is not publishing. Ex: Source Sans Pro Light 16 point is publishing/displaying in web page as ITALIC, not regular. HELP! This issue is cross-platform, PC and Mac. Looks great in Design, Preview all messed up, but PUBLISH shows font as displayed in Preview, NOT as displayed in Design.HOT TOPIC please!Thanks

HiI'm setting a journal that's mostly in English but has one article in Arabic. I'm using InDesign CS5.5ME and am using Adobe Arabic 2.006 for the Arabic text.I have a situation in which it appears that InDesign is reading a diacritical in the middle of a word as an indication that the word has ended.In the screen shot below, you can see that the heh that ends each of these four words is preceded by a dal with one or two diacriticals. It appears that the intervening diacritical is causing InDesign to assume that the word is finished, and so It's setting the heh using its isolated form. What my editor is telling me is that the heh needs to be set using its final form.When I change the font to another font with Arabic characters—say X Davat or Times New Roman—the heh correctly takes on its final form.This leads me to believe that some instruction in the font—perhaps related to the diacritical—is incorrect. The settings in InDesign appear to be correct (otherwise, the problem would appear

Hello,I'm new to graphic design. I'm trying to understand how best to vertically space my content. I have 4 numbers that are each 4" tall. How much space should i add between each number so that they look spaced properly. For instance, imagine I had:1234How much space should be between the 1 and the 2? Or the 2 and the 3? Or the 3 and the 4?Thank you so much for your help!

I'm using Adobe Caslon with Expert Sets to typeset English in an 18th Century style. Unfortunately, some ligatures are missing, specifically ſſl and ſſi. I have drawn my own versions of these using the existing ſſ, ſl and ſi ligatures, but obviously I cannot distribute modified fonts, so it's not possible to pass on these improvements to others.Hence, it would be good to see these ligatures added to the original fonts.Without them, there are two options, neither of which is entirely satisfactory:1. Do nothing. Then, ſſi is typeset as an ſſ ligature followed by i. This just looks ugly.2. Fake up ligatures by overlaying the corresponding pairs. This works quite well for the upright faces, but for the italic faces it's not so good, as the shapes of the second ſ in the ſſ ligature are different from the shapes of the first ſ in the other two ligatures. This is still better than option 1.It would be good to see something done about this, as it's a serious flaw: without proper ligatures, the

We have a group creating brochures and logos using Adobe fonts from Font Folio.  We have a content management system with a utility that creates a pdf rendition of the document or asset when it is uploaded into the system.  Are we okay from a license perspective because we are licensing Font Folio for the document creators and embedding the fonts in the PDF versions using our pdf utility, or is there something we need to license for the conversion utility which is running on a Linux box within our content management system?

Is TypeKit available only by typing URL?and plus,Is TypeKit the system which can download with files?

Just wondering why I can't find the Typography forum.? ? ?

My company has been working with Lucida Sans for print and screen text, and lately I have been fielding complaints about what is perceived as a patchy, low-res look of the typeface as it appears on screen (apps, email etc). It performs well in print, however. I asked a type designer, and he told me that Lucida Sans was originally designed for low-res screens, and on today's high-resolution screens maintains an appearance that has not aged well with the times. He also said that Microsoft has largely abandoned Lucida Sans as a font it supports.Can anybody affirm this problem? Is there a version of Lucida Sans that has been "modernized", smoothed out so that it takes on a better appearance on screen/the web?We are looking at alternate plan B solutions such as Segoe, Myriad, Calibri and Verdana. We would like to avoid this as we have set many templates in Lucida Sans as is and it will be a pain to change them all.

Hello from Germany,can anyone help  to find this font?I was already searching fontshop.com, myfonts.com/whatthefontwhatfontis.comBut no success....Thank you....Tom

Hello,I have been using Adobe Illustrator  but I have a huge problem with the non-english characters with Standart Fonts. With the Professional font's I have no problem with them. But when I'm using any standart font in font folio library I cannot type any "ğ-İ-ş". I can add those letters in fontlab with the glyphs (scedilla, idotaccent, gbreve). Most of the fonts have those letters already prepeared so I dont even have to redraw. But I can't add those glyph to every single font because I dont have that kind of time and patience. Is there any better solution for this? Or is there any font folio pack that all fonts are PRO.I'm looking forward for your answers Thanks.

Are Type 1 Fonts compatible with Windows 8 Pro 64-bit?Can anyone point to a specific reference that says Type 1 fonts should or shouldn't work?

i want to afm font. already i got  otf font(Heisei Mincho StdN W3), bat don't use otf font on unix server's enscript. i want to download afm font(Heisei Mincho StdN W3) or convert otf font to afm font. how to please ask me...

I was adding and subtracting some fonts from my master fonts directory and archived some fonts that are used in Photoshop, specificaly in the "Preferences" section. Now the text is blank in the preference section. What fonts are used there so I can restore them? It looks like this:

I have a licensed copy of Arno Pro.  Someone is helping me to make a one-time, personalized document using software I don't have.  I'd like her to use Arno as the typeface but am not sure how I can do so under the license.  Can I send her the otf file; can I count her computer as one of my licensed CPUs? What are my options?  Thank you.

I recently downloaded the Frutiger std font family to use in Illustrator CS6.  I have since got a new computer and can not get the fonts to re-load on the new harddrive.  I have copied the font files and pasted them to the new hard drive but when I right click on them no install button comes up, only open.  Are you only allowed to install the fonts once? 

I have been searching around and trying to confirm a few things that I *think* I know but it's all very confusing to me:- My client wants to publish an ebook, which will actually just be a PDF displayed online (rather than a Kindle ebook, etc.). It would likely be downloaded by others, though, for a fee. They would get access to the PDF both online and offline (if they purchase it). We haven't chosen a font, but will probably go with a standard system font (minion, myriad, etc.). Assuming we go with an Adobe font, are we covered legally to use the typeface in this way?- Am I correct in telling the client that if we use a system font (say, minion), and they have it on their computer as well, they may also use it for their further commercial purposes without worrying about getting a license? I understand that a license would come into play only if they did NOT have the font on their computer.- What about for web use? if we wanted to use a standard font like minion for their website, woul

Hi I will make my own icons but I didnt find to font type Adobe CC Icons? Anybody knows what is the new Adobe CC Icons Font type? This time not looks myriad "d", "r", "u" differents to myriad looks like much more "Ubuntu Mono" from TypeKits...

Am I be able to use Helvetica Neue (the OS system font) in my corporate branding or will I need to purchase a corporate licence?

Can anyone please confirm whether CS4 can work with Edge Web Fonts? I have followed the DreamWeaver official tutorial, plus two others I found on YouTube, to the letter, but my text still seems to be in Comic Sans, which is not the font I copied. if I just knew it couldn't be done in CS4 I could stop now, as I have already spent 4.5 hours trying to change the font of one word!ThanksJoanne

How do I use a font that is not available for editing in my adobe program?

Am outputting from InDesign CS4 to Acrobat X for in-house and also commercial service bureau printing.Several of my products use the Type1 version of Adobe Cason. Several months ago, when I created a PDF for a service bureau, InDesign substitued OpenType versions of the same font  (Adobe Caslon Pro instead of the PostScript Aodbe Cason) in one of eight paragraphs in the document.  The PDF rendered correctly onscreen and printed correctly on our inhouse laser printers.But in the paragraph with the OpenType version of the font, quite a few number characters dropped out or printed out blank from our Service Bureau's computer and printer.No one there noticed this was happening until several thousand pieces had been run off.When this was brought to my attention, I checked the InDesign file and replaced all instances of Adobe Caslon Pro with Adobe Caslon (the PostScript version). I made another press quality PDF and it printed corrrectly at the service bureau.Later, tried to manual

I am a complete beginner, trying to teach myself DreamWeaver by using the getting started turorials. In tutorial 3, item number 4, I am supposed to copy the css font code from the edge web site and paste it into the sample css sheet I created in tutorial 2. The copying bit is easy but I don't have a clue where to paste it and the tutorial doesn't have any image to show me where it should go. Can someone please help?

HiI received part of the Garamond Premier Pro font family as a gift from Adobe for registering one of my versions of InDesign or Creative Suite. (It's been a while; I can't remember which it was.) I see now that the font has been updated several times and probably fixes a kerning error I'm seeing. Does anyone know if it's possible for me to get a free update to the current version and, if so, how to do it?Thanks.m.

I am looking for a pixilated font like http://www.fontshop.com/fonts/singles/club21/preset_f_ot/ Anyone have an idea?Thanks

Hi,Could anyone advise me on licensing for print with Adobe fonts? Our company advertise in major newspapers using their layouts. Do we have the right to publish fonts included in Adobe in print or is this license at an additional cost?Also, there are certain specific fonts we may need to purchase, for example various styles of Helvetica, Univers and Zapf Dingbats. If we do not own license for these, can we edit documents which include these fonts before they are published, such as InDesign? To be clear, the newspapers who do have the correct license will be publishing them in print.I can't seem to find these fonts in the UK store, does anyone know roughly the cost in GBP?Thanks alot for your help.