P: (GPU) Develop/Edit view & Export artifacts after 14.4.1 Update (AMD-only) (affects Cr, LrC & LrD)

[hyund39164868]

Hi,

Since just now, I've been experiencing a weird bug / crash in Lightroom Classic (on a Mac), where ALL my photos suddenly are fully covered in artefacts in the Develop module.

(Screengrab from the Develop module in Lightroom Classic)

When I check the linked RAW + JPEG source files in Finder, they all seem ok (they don't look corrupted, nor show any artefacts here), meaning the issue is within Lightroom.

(Screengrab from the RAW source file in Finder)

When I export images out of Lightroom (with any setting, edited or even not edited), the artefacts are also present on the export files.

(Screengrab from the exported JPG image)

This problem started occuring soon after I applied the new AI noise reduction feature on just ONE (1) photo. 

I already tried:

• Closing and re-opening Lightroom
• Shutting down (fully), and restarting the computer after 1 minute
• Switching the GPU accelrator setting in Lightroom on/off

MY SPECS

• Lightroom Classic 13.0.1 - Build (202310121438-d2af310c)
• Macbook Pro 16" - 2019
• 2,3Ghz 8-core Intel Core i9
• AMD Radeon Pro 5500M 8GB 
• 32GB 2667MHz DDR4 memory
• OS Sonoma 14.4.1

Any help would be greatly appreciated, because this makes the whole software unusable....

Thank you!

[Ian Lyons]

You trimmed the 'System Info' above where the GPU specs are normally listed. That being said,  the artefacts shown would suggest that the issue you're experiencing is the same as described in https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

Can you confirm your MacBook has an AMD GPU?

Note that if your GPU is AMD, then your post will be merged with above thread.

[johnrellis]

@Mollup, "When I close end re-open Lightroom, the failure still exists. To fix this issue for a while I need to shut down the Mac and start again."

Disabling the graphics processor has helped many with similar symptoms:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

[Mollup]

Yes AMD!

[TeeMeyer]

Subject, Sky and Background masking was working fine up until today.  Now when I select any of them I'm getting a dialog that indicates that no Subject, Sky or Background can be found.  I haven't changed anything, the only thing I did was install some Presets. 

System Info: 

Lightroom Classic version: 13.2 [ 202402141005-bf1aeb84 ]
License: Creative Cloud
Language setting: en-US
Operating system: Mac OS 14
Version: 14.4.1 [23E224]
Application architecture: x64
Logical processor count: 12
Processor speed: 2.6GHz
SqLite Version: 3.36.0
Built-in memory: 16,384.0 MB
Dedicated GPU memory used by Lightroom: 2,664.9MB / 4,080.0MB (65%)
Real memory available to Lightroom: 16,384.0 MB
Real memory used by Lightroom: 2,260.9 MB (13.7%)
Virtual memory used by Lightroom: 42,358.9 MB
Memory cache size: 409.6MB
Internal Camera Raw version: 16.2 [ 1763 ]
Maximum thread count used by Camera Raw: 5
Camera Raw SIMD optimization: SSE2,AVX,AVX2
Camera Raw virtual memory: 695MB / 8191MB (8%)
Camera Raw real memory: 698MB / 16384MB (4%)

Cache1:
Preview1- RAM:22.0MB, VRAM:0.0MB, 2024-04-04 04.43.22-Enhanced-NR.dng
Final2- RAM:189.0MB, VRAM:0.0MB, 2024-04-04 04.44.05-Enhanced-NR.dng
NT- RAM:211.0MB, VRAM:0.0MB, Combined:211.0MB

Cache2:
final1- RAM:189.0MB, VRAM:0.0MB, 2024-04-04 04.43.22-Enhanced-NR.dng
final2- RAM:206.0MB, VRAM:56.0MB, 2024-04-04 04.44.05-Enhanced-NR.dng
T- RAM:395.0MB, VRAM:56.0MB, Combined:451.0MB

Cache3:
m:409.6MB, n:337.2MB

U-main: 119.0MB

Standard Preview Size: 3584 pixels
Displays: 1) 3584x2240, 2) 3440x1440

Graphics Processor Info:
Metal: AMD Radeon Pro 5300M
Init State: GPU for Image Processing supported by default
User Preference: Auto

Application folder: /Applications/Adobe Lightroom Classic
Library Path: /Users/meythere/Pictures/Lightroom/Lightroom Catalog-v13.lrcat
Settings Folder: /Users/meythere/Library/Application Support/Adobe/Lightroom

Installed Plugins:
1) AdobeStock
2) Aperture/iPhoto Importer Plug-in
3) Flickr
4) Nikon Tether Plugin
5) Topaz Photo AI

Config.lua flags: None

[johnrellis]

"Operating system: Mac OS 14
Version: 14.4.1 [23E224]

Metal: AMD Radeon Pro 5300M"

Mac OS 14.4.1 included buggy graphics drivers for the AMD Radeon 5000 series graphics processors:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

Adobe says they're working with Apple and AMD on the issue. Most people report images filled with "static", though there have been a smaller number of reports about problems with the AI commands. 

You could try restarting your computer and see if the problem goes away (at least for a while). The other working, setting Preferences > Performance > Use Graphics Processor to Off, won't help you, since Adobe inexplicably refuses to have the AI commands obey that setting -- the commands always use the GPU regardless.

[tomw58006331]

I have asked around and I know some other folks are seeing this as well but when I take a raw file into LR Classic these last few version updates, square artifacts are randomly created on the images whenever I use enhance to denoise.  These artifacts are not created when using Topaz Photo AI to denoise for instance.  I have been unable to get an answer for why this is happening.

Currently using version 13.3 of LR Classic and this has been happening since version 13.  Nothing on my desktop Imac has changed except I have been updating LR Classic.  When it was working, the enhance feature was brilliant but I feel like for some reason it has not been working on my Mac desktop or laptop for the last few updates.  Does anyone have any idea how to diagnose this issue or what might be causing it?  I have not heard of anyone experiencing this with a windows based machine.  My iMac is an Intel Mac 2017 based, not one of the M2 or M3 macs.  Thanks to anyone who has an idea why this is happening since version 13 of LR Classic.  

[johnrellis]

xxx

[johnrellis]

@tomw58006331 , "Graphics AMD Radeon Pro 5500 XT 8 GB

macOS Sonoma 14.5"

Mac OS 14.4.1 included buggy graphics drivers for the AMD Radeon 5000 series graphics processors. Adobe says they're working with Apple and AMD on the issue (see the pinned reply at the top of this thread). Most people report images filled with "static", though there have been some reports about problems with the AI commands including Denoise, which haven't been merged here.

You could try restarting your computer and see if the problem goes away (at least for a while). The other workaround, setting Preferences > Performance > Use Graphics Processor to Off, won't help you, since Adobe inexplicably refuses to have the AI commands obey that setting -- the commands always use the GPU regardless.

[johnrellis]

Moderators, @Rikk Flohr: Photography, please merge with this bug report:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

Though that thread was original about reports of static-filled images using AMD 5000-series GPUs on Macs, there have been a number of reports here of problems with Denoise and AI Masking with the same GPUs, also starting with Mac OS 14.4.1.

[Lumigraphics]

Apple has released Sonoma 14.5 and Adobe has ACR and Photoshop updates out today, hopefully those will fix the problem.

[Bonnie Lampley]

Hello,

I just updated the iOS on my 2020 MacBook Pro to Sonoma 14.5.  Also updated to the latest PS, Bridge, and ACR (16.3).  Now when I open a RAW file (dng) in ACR I get the following type of image, where it's obscured by weird colored pixels.  I've googled around trying to figure this out, to no avail.  The thumbnail at the bottom of the screen looks ok.  Can someone direct me to a solution? 

Thanks,

Bonnie

[johnrellis]

@Bonnie Lampley, do the menu command Help > System Info and verify you're on an Intel Mac with an AMD series 5000 GPU. If you are, then see here for the cause and two workarounds:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

If you don't have an AMD series 5000 GPU, please copy and paste the entire Help > System Info contents here.

[Lumigraphics]

Macs use macOS, not iOS (which is iPhones.)

This is a known problem. I'm seeing it intermittently on a 2019 MacBook Pro/Radeon card. Restarting the computer seems to fix it.

[Bonnie Lampley]

Thank you, @johnrellis.  Restarting fixed it (at least temporarily).  And thanks for moving my question to the appropriate forum.

[Joerg_S.]

For about 6 weeks I have had the problem that files (Raw, PSD and others) change color when switching from the library module to the develop module. There are color spots on the image that also change.
When exporting, all images get a yellow tint with strange tearing.
I have the latest version of LR Classic (May 29, 2024) on a MAC Powerbook, 2.3 GHz 8-core Intel Core i9 , AMD Radeon Pro 5500M 8 GB
Intel UHD Graphics 630 1536 MB, MAC OS

Does anybody has an idea? 

[johnrellis]

@Joerg_S., see here for the cause and workarounds:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

[Manny_Pandya]

After updating to LRC 13.3, when I rendered jpgs, the image will appear with a heavy layer of "green static" over the barely recognizable image. I shut down LRC and my computer, restarted everything, re-rendered the images and they were clear. Then I edited a few more images, rendered them and the green static appeared again. So I shut down everything, opened it all up and was able to re-render the images clear again. This seems to be a LRC issue, it's not corrupt raw files (it happens to anything I try to render with any camera taken and loaded into LRC before and after the 13.3 upgrade). The thumbnails do not show the green static, but when you open the files, then it appears. I've attached a screen shot of the file closed, showing a normal thumbnail, and a screen shot of the file opened, showing the green-static. I tried to attach the original rendered file but it's too large. As of this morning I cannot replicate the problem, but wanted to start the conversation to see if anyone else is experiencing it or if tech-help has any constructive info. I'm rushing off to the next shoot and I will update this post if I do or do not continue to see the issue.

[Rikk Flohr: Photography]

Do you have the same GPU as is mentioned in this similar thread?
https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a... 

[Manny_Pandya]

It looks like I have the same or very similar. Screen shot of computer specs attached...

[johnrellis]

@Manny_Pandya, see here for the cause and workarounds:

https://community.adobe.com/t5/lightroom-classic-bugs/p-gpu-develop-edit-view-amp-export-artifacts-a...

[Jonathan316]

A number of days ago I upgraded to OS 14.5 Sonoma and updated to the latest version of LR Classic 13.3 Camera Raw 16.3. Turned on the Graphics Processor and everything was fine until a few moments ago, when I started getting the strange artifacting again. Did as was suggested and put the Graphics Processor on Custom and set it for the monitor only and the problem went away. I assume that the Graphics Processor is no longer working to full capacity now. Will this be fixed or is this the end of story?

[Lumigraphics]

Apple engineers are getting ready for the annual developer conference in less than two weeks, there will almost certainly not be any updates to Sonoma before then. FWIW, I have not seen this happen since installing 14.5 but that may not mean anything.

[johnrellis]

"Will this [GPU problem] be fixed or is this the end of story?"

If, as is most likely, this is caused by a buggy graphics driver, then AMD will have to supply a fixed driver to Apple, which will include it in its next Mac OS release. Adobe has said they're working with Apple on the issue, but Adobe rarely discloses if or when bugs will be fixed.

[Jonathan316]

The artifact problem appears to be resolved with the workaround suggested but now I'm seeing another problem. The Blur function in LR Classic no longer works for me. Once I select "Apply" it goes through its usual spin cycle and then when it's done, there is no focus range. The entire image becomes blurred. I've used this quite extensively previously with some pretty good results (I think this needs further refinement anyway. If I select the mask and then background, it usually does a really good job. I would expect the blur to be the same but in fact, it's not as refined.)

[graceg55932524]

@johnrellis I am having the same problem. This is what my Help > System Info says. I hope you can help get me out of this mess.   

Lightroom Classic version: 13.3 [ 202405092057-40441e28 ]
License: Creative Cloud
Language setting: en-US
Operating system: Mac OS 14
Version: 14.4.1 [23E224]
Application architecture: x64
Logical processor count: 16
Processor speed: 2.3GHz
SqLite Version: 3.36.0
Power Source: Plugged In, 100%
Built-in memory: 16,384.0 MB
Dedicated GPU memory used by Lightroom: 2,583.1MB / 8,176.0MB (31%)
Real memory available to Lightroom: 16,384.0 MB
Real memory used by Lightroom: 1,584.3 MB (9.6%)
Virtual memory used by Lightroom: 40,437.6 MB
Memory cache size: 16.4MB
Internal Camera Raw version: 16.3 [ 1863 ]
Maximum thread count used by Camera Raw: 5
Camera Raw SIMD optimization: SSE2,AVX,AVX2
Camera Raw virtual memory: 747MB / 8191MB (9%)
Camera Raw real memory: 981MB / 16384MB (5%)

Cache1:
Final1- RAM:37.0MB, VRAM:0.0MB, 5A14C7CA-73F1-4795-822D-0D3BE2D8483F.dng
Final2- RAM:37.0MB, VRAM:0.0MB, 89F3839D-2A9E-47FD-B98F-2B6D5ECF6235.dng
Final3- RAM:37.0MB, VRAM:0.0MB, 59A22527-7F23-49AA-9602-C950C2B969C9.dng
Preview4- RAM:22.0MB, VRAM:0.0MB, DSC03141.ARW
Final5- RAM:37.0MB, VRAM:0.0MB, EC569C4B-D1C5-4D81-8F66-D2C82123F66D.dng
Final6- RAM:99.0MB, VRAM:0.0MB, DSC03139.ARW
Final7- RAM:249.0MB, VRAM:1,929.0MB, BRG_Pawty_001.ARW
Preview8- RAM:22.0MB, VRAM:0.0MB, DSC03142.ARW
Final9- RAM:99.0MB, VRAM:0.0MB, BRG_Pawty_002.ARW
NT- RAM:639.0MB, VRAM:1,929.0MB, Combined:2,568.0MB

Cache2:
m:16.4MB, n:489.3MB

U-main: 80.0MB

Standard Preview Size: 3584 pixels
Displays: 1) 3584x2240

Graphics Processor Info:
Metal: AMD Radeon Pro 5500M
Init State: GPU for Export supported by default
User Preference: Auto

Application folder: /Applications/Adobe Lightroom Classic
Library Path: /Volumes/My Passport for Mac/2024.2.2 Reminisce catalog/2024.2.2 Reminisce catalog-v13-3.lrcat
Settings Folder: /Users/gracegoodale/Library/Application Support/Adobe/Lightroom

Installed Plugins:
1) AdobeStock
2) Aperture/iPhoto Importer Plug-in
3) Flickr
4) Nikon Tether Plugin
5) SmugMug

Config.lua flags: