Skip to main content
D
Dan Rothstein
Participating Frequently
March 20, 2012
Answered

Nikon D7000 LR4 Camera Raw color issues

  • March 20, 2012
  • 8 replies
  • 21747 views

I just upgraded my camera from a Nikon D70 to a D7000.

Problem: When I process the RAW /NEF files with Adobe Lightroom 4 the color is terrible. By that I mean, the images look dull, dark and have no pop. The coloring is not even close to what is displayed on the Nikon camera screen.

When I use Nikon View NX: The software which is pakaged with the camera produces an image which is, or almost identical to the image on the camera after the photo is taken.

I like the funcionality of lightroom better than ViewNX, so what I have been doing is processing with ViewNX and then exporting to a TIFF.  Opening up LR4 and then importing and cataloging.  This process is a pain and time consuming. 

I also have found LR3 does a better job than LR4 at processing the images.

Is there a way I can tweak or download corrected ACR settings to match my Nikon D7000.

    This topic has been closed for replies.
    Correct answer

    well you have worked with raw before?

    if not i suggest you get some basic information about raw developing and if it is for you.

    what you see on your cameras LCD screen are "in camera" processed JPG previews.

    your nikon software knows exactly what the camera is doing internally and can therefore reproduce the camera-engine-looks much better then third party software.

    but when you want the JPG look you can take JPG´s not?

    RAW is for people who WANT to develop their own images.


    i don´t want that a engineer in japan decides how my images look.

    sure that means i have to put my own work into developing the images.

    adobe does offers some presets (for some cameras) beside the standard profile.

    but i have to say most of them look not as good as what you get from nikon or canons raw software.

    so you have to make your own profil.

    8 replies

    T
    tonionboard
    Participant
    June 11, 2012

    It's pretty amazing how so many threads about photography finish on a debate about the great ken...

    Well, I just want to notice and confirm that even with the provided profiles of lightroom, the images can look awful (especially: dull, flat...) compared to in-camera RAW processing. I have just compared photos from my D700 that I actually still don't like after RAW processing in LR, and they are way better (though not perfect) on the jpeg created by the camera.

    I of course put off D-lightning, and my in-camera settings are default and the picture control used is the standard one (with just a bit of sharpening).

    I would thus be really interested in any good website/tutorial/material on how to create profiles to counter this problem. Or where to download some ?

    Profiles for raw, not presets :-)

    Thanks,

    Antoine

    D
    dtNikon0001
    Participant
    September 9, 2012

    I have figured out myself the profile correction problem for my Nikon D7000 NEF Problem. It almost match to the one in NX2 or even on camera LCD.  the following is what I have adjusted in my LR4

    Brightness +1.00

    Contrasts +28~33

    Shadow +40~55

    Black -25

    Don't Forget change the Profile setting on Camera Calibration under the Develop mode to match the what you set on your camera. I always shot on Standard mode, therefore I set the Profile to Camera Standard.

    -------------------------------------------------

    The following is the way I figure it out.

    1.  I imported the photo under "Zeroed" at Import page under Develop setting > Lightroom Genaral Present > Zeroed

    2.  Open one of the imported picture on Develop mode

    3.  Scroll down to Camera Calibration change the profile setting to match they one you set on your camera, in this case I choose Camera standard.

    4. Under the Camera Calibration>Process you will see 2012(Present), changed it to 2010, and change it back to 2012 (present again)

    5. You will notice that the develop setting automaticly change to the following (Brightness -1.00, contrasts -33 and black +25) Let say this is what lightroom did to your picture( from Nikon D7000 NEF)

    6. and then Change everything back to " 0 " will you find your picture nearly close to the one you saw on NX2.0 or Nikon LCD

    ------------------------------------------------

    If your found the step above is hard to follow, please just change the Brightness +1.00, Contrasts +33 and Black -25, and dont forget adjust a bit of shadow as well.

    for the people who dont know what Nikon done to Nikon D7000, please dont be expert to say "you dont know RAW".  please read more reviews first before helping people who are new to RAW or even stuck on RAW.  This forum is helping people with our knowledge, is not to make people need help to get more confuse.

    For Nikon D7000 user.... Remember turn D-Lightning off.... this is one of the problem will cause LR4 change your tone to more darker, especially on portrait photoshot. Hopefully Adobe will realease the new update soon to match the new system inside Nikon camera.

    Please note that the step above only Apply for Nikon D7000 and Lightroom 4 only. And it is not 100% correct to what you seen on your camera, at least is 80~90% Match!!

    E
    endoverend.com
    Participating Frequently
    March 20, 2012

    I am not here to bash on Ken: that said, try the settings i suggested - turn color management to more neutral settings and push Vibrance in LR if you need Saturation later

    this is only a small help for me as I HATE the way LR renders my DNG files. Its like half of the camera information is lost...or all of it ... who knows .. they wont say..

    E
    endoverend.com
    Participating Frequently
    March 20, 2012

    BTW Kens rant was listed in the D3 category of his site and i did not the follow the advice to turn the D-lighting ON - it is better OFF for me

    E
    endoverend.com
    Participating Frequently
    March 20, 2012

    advice is not always bad from sources that are hit and miss....this exact scenario was helped by Kens words in tht he brought attention to the fact that the Nikon oversaturates in the color management mode that it is shipped in

    and yes i have my own opinions ...

    A
    Anonymous
    March 20, 2012

    that is what suprises me. he is well known for pushing the saturation slider to the max.

    that he says something is TOO saturated... wow.

    beside that he changes his opinions faster then paris hilton her bed toys.

    E
    endoverend.com
    Participating Frequently
    March 20, 2012

    "In camera" (color management) is too saturated (and dark) in my D3s - try a more neutral setting IN the camera

    no noise reduct or D lighting or ADR turned on shooting NEF/RAW

    lightroom is all about presets and you almost never have it come into LR and look ready to go -kinda sad actually.

    google ken rockwells opinion on this, his tips helped me a bit

    A
    Anonymous
    March 20, 2012

    ken rockwell? really?

    E
    endoverend.com
    Participating Frequently
    March 20, 2012

    did you google him before asking me ?

    D
    Dan RothsteinAuthor
    Participating Frequently
    March 20, 2012

    Thank you Lee Jay, are you referring to Camera Standard vs. Adobe Standard. If so, I have been using Camera Standard.

    The color with this setup is still off. 

    L
    Lee Jay
    Inspiring
    March 20, 2012

    Use which ever one you use in the camera (portrait, landscape, standard, whatever).

    Read this too:

    http://forums.adobe.com/thread/358016?tstart=30

    A
    Anonymous
    Correct answer
    March 20, 2012

    well you have worked with raw before?

    if not i suggest you get some basic information about raw developing and if it is for you.

    what you see on your cameras LCD screen are "in camera" processed JPG previews.

    your nikon software knows exactly what the camera is doing internally and can therefore reproduce the camera-engine-looks much better then third party software.

    but when you want the JPG look you can take JPG´s not?

    RAW is for people who WANT to develop their own images.


    i don´t want that a engineer in japan decides how my images look.

    sure that means i have to put my own work into developing the images.

    adobe does offers some presets (for some cameras) beside the standard profile.

    but i have to say most of them look not as good as what you get from nikon or canons raw software.

    so you have to make your own profil.

    D
    Dan RothsteinAuthor
    Participating Frequently
    March 20, 2012

    Agfaclack, I understand your point.

    Do you have a nikon d7000

    A
    Anonymous
    March 20, 2012

    CameraMan2012 wrote:

    Agfaclack, I understand your point.

    Do you have a nikon d7000

    nope im a canon guy. but the "problem" is the same for us all.

    adobe has problems to get the exact or same look because it does not know how the camera or the software from the manufacturer is processing the images.

    and even if they would know.. LR would still not have the same engine to process the RAW files.

    adobe has to reverse engineer the look and try to copy it with the LR engine.

    in case of my canon cameras.. they have done no great job.
    the adobe presets are often awfull off.

    but i have made my own profiles.

    and i shoot raw because i tweak every shooting or every individual images separately.

    L
    Lee Jay
    Inspiring
    March 20, 2012

    Use the Camera Matching profiles.  You already have them.

    Terms & ConditionsAccessibility statement
    Using the community Terms of use Privacy Cookie preferences Do not sell or share my personal information ad choicesAdChoices