Re: aep to mp4

Byron Cortez · ‎Apr 24, 2018

You are right Carlos, it must be in the AME to be able to export to MP4 not in the Render Queue.

Byron Cortez · ‎Apr 24, 2018

Hi Press these 2 buttons and start from scratch without cache. Regards!

Byron Cortez · ‎Apr 24, 2018

Hi Put them all in the Queue Render and leave them a whole night exporting. Do not do it one by one because it will take you a long time. Regards!

Byron Cortez · ‎Apr 24, 2018

Hi Give us a little more information about your computer and your project please.

Byron Cortez · ‎Apr 14, 2018

Hi In Illustrator, the groups in your Layer should look more or less like my screenshot. And when selecting your chart your Bounding Box should only select your chart. Something like my screenshot. Regards!

Byron Cortez · ‎Apr 11, 2018

Hi I think your laptop has a slow hard drive. Here I leave a tool for you to see well the characteristics of your machine. if your hard drive is 5400 rpm that is a potential reason. There may be other reasons why this happens to you. Download CPU-Z and upload screenshot. https://www.cpuid.com/softwares/cpu-z.html Regards!

Byron Cortez · ‎Apr 11, 2018

No stupid questions, try these steps I'm sure they will help you with your problem.

Byron Cortez · ‎Apr 11, 2018

Hi Maybe you are also using Handles and this makes your position interpolation not in a straight line. Check this in the Composition panel if you have Handles or not.

Byron Cortez · ‎Apr 11, 2018

Hi - Make sure you do not have another application that consumes a lot of RAM. - Verify that Windows is not making system updates while you are working in AE. - Defrag your hard drive. - Check your system with an antivirus. - See if you're not running out of virtual memory. - Purge AE. Some of this must be happening because the AE update is fine as long as you have a healthy and stable operating system. Regards!

Byron Cortez · ‎Apr 09, 2018

Hi Please, tell us your computer specs and upload screenshots to be able to help you better.

Byron Cortez · ‎Apr 06, 2018

Hi If you have each of your 5 minute videos on different AE projects, then you must open one of these projects and import the others into it. Use the same option as always to import files, but now select the After Effects project and insert the compositions you have inside them. So you have them ready to use and 5 minutes each one. Regards!

Byron Cortez · ‎Apr 06, 2018

Hola Daniel En el panel Pintar dale clic en el icono del brush (mira mi captura de pantalla) Se te abre el panel Pinceles, ponle al menos un 25% al Espaciado (Spacing), de seguro tienes un valor muy alto. Espero haberte ayudado. Saludos!

Byron Cortez · ‎Apr 05, 2018

I assure you that many tests and tests are done before releasing an update or new version, but unfortunately not all the hardware and software is in the same conditions or at least in similar conditions. The diversity of features, state of the operating system, disk defragmentation, disk errors, viruses, ram problems, etc., etc., makes it very difficult for everything to be perfect. That is why users need to tell Adobe through the Adobe Forums about these problems, then release a service pack update and refine many of those problems. Obviously, first we try to give you a quick solution. Regards!

Byron Cortez · ‎Apr 05, 2018

Or you can add a Mask reference selecting the correct audio Layer.

Byron Cortez · ‎Apr 05, 2018

Hi Please, upload screenshots of Mask properties and the Layers of your timeline.

Byron Cortez · ‎Apr 05, 2018

In your case I recommend you use version 12.0.1 until we find the solution to this problem. Do not despair that unless a rooster sings we will have it.

Byron Cortez · ‎Apr 05, 2018

This can help you too: Unofficial Premiere Pro Troubleshooting Guide

Byron Cortez · ‎Apr 05, 2018

Hi Try open the last autosaved project. You have "Adobe Premiere Pro Auto-Save" folder in your project folder.

Byron Cortez · ‎Apr 01, 2018

Hi Metal is an Apple graphics technology that allows the CPU and the GPU to work more effectively thereby providing better performance. And yes, at this point the current version of Premiere Pro is compatible with High Sierra. Regards!

Byron Cortez · ‎Apr 01, 2018

Hi In order to have more spacious your Program panel and your timeline, you have to increase the resolution of your screen by going to the Windows Control Panel / Screen / Resolution, when you do that Premiere Pro adjusts to that bigger resolution and therefore everything is see smaller, making you have more workspace so you can see everything as the first screenshot you showed us. To change this will depend on your video card (GPU), if it does not support more resolution you should buy another one that supports more resolution. This purchase in turn depends on other features of your computer and your monitor, so before buying a new one, make sure it is compatible. Regards!

Byron Cortez · ‎Apr 01, 2018

Try this: Immediately when you click to open After Effects, press Ctrl + Shft + Alt and hold until a dialog box appears indicating whether you want to delete the preferences. This will remove Ae's preferences to default settings. Regards!

Byron Cortez · ‎Mar 29, 2018

You're welcome!

Byron Cortez · ‎Mar 29, 2018

Try changing the Mercury Playback Engine GPU acceleration: File / Project Settings / General... Then change the acceleration to Software Only to test: If not works fine, try with other. Regards!

Byron Cortez · ‎Mar 29, 2018

Show us all Layer Properties please. Character panel too.

Byron Cortez · ‎Mar 27, 2018

AAC is a very good audio codec but it’s a compressor codec, sounds good but you have loss in audio quality. Uncompressed is lossless codec, maintains the fidelity of the original audio. Regards!

Byron Cortez · ‎Mar 27, 2018

OH, it's for YouTube. In that case it is not necessary so much quality that the only thing that will do is increase the weight of your video file because when uploading a video on YouTube, it transcodes and compresses your file in several resolutions, that is, it does not maintain the original quality as we would like. In that case with these configurations are enough: Regards!

Byron Cortez · ‎Mar 27, 2018

Hi Based on your screenshot, you have to use Uncompressed / 96000 Hz / 32bits float, to get the best possible audio quality. But, depends on where do you go to play it to run nicely. Regards!

Byron Cortez · ‎Mar 27, 2018

Hi Michael Why you are trying to use Handbrake if you have got Adobe Media Encoder where you have total control of what are you exporting? Media Encoder tutorials | Learn how to use Adobe Media Encoder CC Perhaps now you need some time to learn how to use it, but to the future it will be faster. Worth it. Regards!

Byron Cortez · ‎Mar 27, 2018

Hi In my case in the screenshot, if I want the rectangle stay there for 2 seconds in the same place, click in "Add or remove keyframe at current time" to create a new keyframe just in time where the playhead are, maintaining the information of the last keyframe at the left in timeline. It means that the rectangle do not move by 2 seconds because this new keyframe have the same position information. Then you can continue moving and animating your graphics. I hope this helps you. Regards!

Byron Cortez · ‎Mar 23, 2018

Hi Open your video in Quicktime player and export audio only, like my screenshot: File / Export As / Audio only... Then, sync in PrPro selecting both audio and video in timeline, right click and choose Link. That's all. Regards!

Byron Cortez

Byron Cortez

Activity

Re: aep to mp4

Re: Rendering On Overwrite Saves OId Versions

Re: aep to mp4

Re: After Effects brush delay when trying to draw

Re: Resizing a Shape Layer's Bounding Box

Re: Spinning wheel every few seconds for no reason

Re: AE stuck (It was working fine)

Re: After effects adding random position point aga...

Re: AE stuck (It was working fine)

Re: Video Files are blacked out after update

Re: Opening multiple AE files in After Effects?

Re: Mi pincel no funciona bien

Re: Files not linking after update to 12.1.0

Re: Masking a audio specrum

Re: Masking a audio specrum

Re: Files not linking after update to 12.1.0

Re: Files not linking after update to 12.1.0

Re: Files not linking after update to 12.1.0

Re: Open CL or Apple Metal?

Re: How do i get my Project windows to look like t...

Re: Someone help please my after effects says the ...

Re: [URGENTE] Importo mis videos al Adobe Premiere...

Re: [URGENTE] Importo mis videos al Adobe Premiere...

Re: Text not showing

Re: How to export the Hightest Audio Quality (16-2...

Re: How to export the Hightest Audio Quality (16-2...

Re: How to export the Hightest Audio Quality (16-2...

Re: Handbrake

Re: Can't get composition to stop and hold in Afte...

Re: Audio will not import