Adobe Media Encoder

Hi.However, the H265 codec is missing in the Media Encoder program.This is very important for me. What should I do?Please help me.The systems and programs I use are as follows:- New MacBook Pro Touch Bar (Max. Hardware)macOS High Sierra 10.13.23.1 GHz Intel Core i716 GB 2133 MHz RAMRadeon Pro 5602TB SSD- Adobe Media Encoder CC 12.0 (Build 202) (up-to-date)- Adobe After Effects CC 2018 15.0.0 (Build 180) (up-to-date)- Adobe Premiere Pro CC 12.0.0 (Build 224) (up-to-date)

Please help. I have a new MacBook Pro and have been running the latest Adobe Premiere Pro and Media Encorder. For some reason, its starting to export my finals at a very slow rate. I had a 1 minute video that it taking 8 hours to export. It was working fine the other day, I haven't made any changes to my computer or settings, just been working on editing the footage when I ran into this extremely frustrating issue. I have a client that is waiting for a 55 minute project I want to export but it says it will take 20 hours to export. I also find it weird that on Media Encorder, when it did elapsed my 55 mins video (in one attempt) the elapse bar doesn't move and the render time increases. Please help me. I've tried uninstalling and reinstalling both PP and AME. No luck. I honestly don't know what to do.SPECS ABOUT MY COMPUTERMacBook Pro (13-inch, 2020, Four Thunderbolt 3 ports)Memory: 16 GB 3733 MHz LPDDR4

I'm using AME CC 2018 version 12.12.Every time I export a H.264 video with bitrate setting below 1 Mbps, the output's total bitrate is always around 3 Mbps. I tried with 0.9 Mbps, 0.6, 0.4.. it's still the same When I set it to 1 Mbps and 1.1 Mbps, it exported correctly. I never get this problem in the previous version of AME.Why does it happen and is there a way to fix this?

I can see the right previews (in AE and Premiere) and the audio its ok. But as soon as i want to export in Media Encoder the background music channel its ok, but the voice its like 2 seconds late. I tried almost everything but still cant get a good MP4 render. Any advice?

HiAnyone good at M2V encoding and have some experience in that?Would like to compare two files, and see what is the difference between them, if any.For example if there´s diff in MPEG-2 structure or GOP structure.Is there any software for that kind of task? thanksMarcos

Hello everyone, i'm trying to create a button on a premiere panel that would check if all the current jobs that were queued to be renderd in Adobe Media Encoder have finished. Then it would return either True or False back to the panel. I've been digging around but all I can find is "app.encoder.bind('onEncoderJobComplete', callback);" which will notify when each job is finished but not when ALL jobs are done it also can't return back to evalscript() either.  I am developing on Mac as well. Any help would be greatly appreciated!!Thanks This is my thought process so far:main.js:let csInterface = new CSInterface();let dev_button = document.getElementById('testButton');dev_button.addEventListener('click', testDevFunction);function testDevFunction(){csInterface.evalScript('checkEncoderRunning()', function(response){alert("" + response);});} extendscript.jsx:function checkEncoderRunning(){// Checks Adobe Media encoder if there are any jobs still on the render q

For some reason, I cannot add any After Effects compositions to the queue in Adobe Media Encoder. When I try to add something to the queue, it either produces the error message "file format is not supported" or tries to connect to Dynamic Link server and says "file could not be opened". I am using AE v 17.1 and AME v 13.1.5 and have not updated either piece of software recently. In fact, it was working fine yesterday, before I shut down my Macbook Pro. It's worth noting that a few months ago, I had a similar problem with AME 14.x (connecting to Dynamic Link forever or displaying the same "file could not be opened" message), but I solved the problem somehow by reverting to v 13.1.5.

Help! Ok, so I have a gif that's too big, but in proportion. I was able to downsize it to the correct proportion using the Animated gif option in ME, but in the original I have the last "scene" sitting there for a couple of seconds before it loops so it's readable. And yet when I converte it in ME, it cuts those last two seconds off. It clips it right as the last animation ends and it loops then. How do I make it not do that? Thanks. 

I have a ton of 60FPS APR (Apple Pro Res) 422 files. I want to package it at 24FPS. I don't want to conform to 24 FPS because I don't want to lose those frames. I want to interpret that footage at 24FPS so it playback slower. Easy. Seems to me I shouldn't need to re-render everything in order to make this change. Seems like an adjustment to the time base of a file is an under the hood solve. If I remember correctly, long ago, you could do this with something like compressor. 

Hello,I have lost the option to use TS multiplexer in the 2018 AME. I was using version 2017.1.2 (Build 11.1.2.35) AME for a years. My preset is based on a H.264 Blu-ray format. My presets for daily workflow have migrated to AME 2018. However, some of my presets no longer encode a .m2t file. They are demuxed .wav and .m4v. I need to encode .m2t files for my media server. What has changed and why? Any help would be great. I can email you my preset to make this clear if need be. Thank you!

To my dismay when I activated an Adobe font for a Premiere Pro project title it cancelled, STOPPED the render in Media Encoder on another project I was doing in the background! I have just lost a 5 hour render. Wow, that is a bug!  I simply wanted to type in a Premiere title in the Nobel font like I had seen in Acrobat PDF. The font was not available on my system so I went to activate it in my Creative Cloud. It then crashed Media Encoder!   

So this is the specs that I need a preset file for but I am having an issue finding the settings for this. Specifically the GOP settings and the video stream type. I am not sure if Media Encoder is capable of this level of control or not.. The source files are mp4 and need to be converted to mpeg2, any help/suggestion is welcome. Thanks!!

Hello! I've been running into the error code "-1609629695" on and off recently (solved it previously by recording the playback in full resolution and adding that mp4 to my main composition in ae) but this time it completely freezes my computer. Here are my system specs: i5 9400Nvidia RTX 2060 Super16GB DDR4 I've already tried reinstalling AE and AME, updating them to the latest versions, and copy-pasting everything into a new composition.

My memory isn't what it used to be, but it seems to me that I converted some MOV files to MP4 just a couple of days ago. Why does it happen now that when I try to do this I get the message "the source compression type is not supported". Really? What with the current deprecation of MOVs, isn't there a huge demand for converting them to MP4s? Is there something I'm doing wrong?

Literally, I have to duplicate the same export 3-4 times before it finally successfully exports. I'm waiting so long for something to export, and then it fails, wasting all of my time. Please fix this issue, it's getting really annoying at this point. 

Hi everyone, I am unable to export my video on Adobe Premiere Rush (not Adobe Premiere Pro) when I try to an error message comes up, please see the image below. I was using version 1.5.20 and it should be up to date. I have had to install an older version to export. 

Hi everyone, I rendered an image sequence with the media encoder and wanted to rerender only frame 300 - 500. Unfortunately, the new rendered sequence is always starting at frame 0000 and not 0300.  Is there any trick how to change it? Thanks a lot for your helpAnna

Hello!I've been having an issue with AME where the render is very off from the preview in AE. I will have my video edited just the way I want it, but then when the render is completed, the final product is completely off from the preview. I'm simply adding captions to a very short video (under two minutes), but the words are off from the audio every time. I've tried restarting my computer and closing out the programs and changing a few things in the edit, but nothing is working. I think perhaps the visual got sped up where the audio stayed the same? Any help would be greatly appreciated, thank you.

every time i try to export, no matter the format or what not, it crashes on exactly the same frame each time. im guessing that frame is corrupt or something but i have no idea how to fix it and its driving me mad. help me before i go insane please i am on windows 10 using the CC 2019 version.

In my PDFs, I want to either embed or link to video clips that readers can study one frame at a time (they're short sign language videos where one must look for subtle events). So far the only standard video viewing app with this capability that I know of is Quicktime, but this is now deprecated, requiring lots of time-consuming workarounds on my part. If there's another video viewing app that can accomplish frame-by-frame viewing, my life would be easier since I could just tell my readers to make that the default for MP4s (although presumably I'd have to link to it in PDFs instead of embedding it). Thanks.

Hello,I'm having trouble exporting .H264 files in Media Encoder. It just sits blank and won't encode anything. The last couple of days, it would encode, but develop a red MEDIA OFFLINE screen for the first 30 seconds of the video, when that would never be the case before. Over the last few days I've encountered several issues wth Media Encoder. Was hoping the latest update would remedy that. May also be an issue with the Dynamic Link server. Any help or advice would be appreciated.

I have installed the webm plugin from fnord and it appears in the media encoder, however the option to include the alpha channel doesn't seem to work. I have no idea why. I use OSx 10.14.6 Mojave Premiere Pro v14.3.2Media Encoder v14.3.1 I've spent 2 days trying to find a solution!!!Can anybody help please?Why is webm not an option included with Adobe Media Encoder in the first place?

I installed huge pack of plugins for AE but I don't need them in Media Encoder as it's loading for too long with plugins

Export ErrorError compiling movie.Render ErrorRender returned error.Writing with exporter: AVIWriting to file: D:\ThesisSlides.aviAround timecode: 00;00;00;00Rendering at offset: 0.000 secondsComponent: AVI of type ExporterSelector: 9Error code: -1609629695 Hoping to find a solution to this issue as I've been attempting to export a series of videos with it randomly successfully exporting, but mostly failing. The timecode the encoding fails at and the file type I export as doesn't seem to matter as far as errors go. I've tried it with and without graphical acceleration. It doesn't seem to make any difference as to when it fails, although with the software only it seems to fail later.  I've looked through the forums as seemingly similar errors but I don't think I've seen a post with this exact error number, so I'm hoping someone who can properly read the error code can give me some direction as to what to do as trying blindly in the dark has already eaten a day of tim

I bring an AE file into Media Encoder, with Export set to “Match Source - High bitrate.” The  Estimated File Size is 85 MB. If I then lower Width and Height settings to half size (2560x1440 down to 1280x720), the Estimated File Size stays the same. Shouldn’t it reduce to about 25% of the original size, down to about 20 MB? Here’s the QT Inspector info on both movies: test hi.mp4 Source: /Volumes/1 work/test hi.mp4Format: H.264 HD (1-1-1)Stereo (L R), AAC, 48000 HzResolution: 2560 x 1440, 16:9Encoded FPS: 29.97Data Size: 99.4 MBData Rate: 11.30 Mbit/sCurrent Size: 1811 x 1019 (Scaled 0.71x)  test lo.mp4 Source: /Volumes/1 work/test lo.mp4Format: H.264 HD (1-1-1)Stereo (L R), AAC, 48000 HzResolution: 1280 x 720, 16:9Encoded FPS: 29.97Data Size: 99.3 MBData Rate: 11.30 Mbit/sCurrent Size: 906 x 510 (Scaled 0.71x)  Thanks.