Adobe Media Encoder

Encoding in h.264, tried every other options.If VBR 2 pass : no problem.If VBR 1 Pass : the audio doesn't goes to the end, it stops abruptly at 5% to the end of the clip.In our company all premiere pro and AME exports do the same thing (4 computers 2 mac, 2 pc) Am I the only one ? 😕😕  

Hi everyone, I've been struggling with this issue for a while. I create looping animations that are generally viewed in browsers. When I create them in AE they loop perfectly, both video and audio are great. But when I render the movie in AME and then play it on loop, there's like a buffering pause at the beginning of each loop, ruining the smooth playback. I've tinkered around with settings, have searched high and low for a solution but there doesn't appear to be one? Am i wasting my time with this or is it possible to eliminate this? Even if I have to use "other software" like VLC or FFMPEG? I just want to know if I'm wasting my time trying to find a fix that just doesn't exists? I've seen loads of complaints about it online, but so far, none of the suggested solutions have worked. Thanks millions for any tried and tested solutions.

Hi there, kind of a weird issue I've been having lately. I've had some deliverables for clients lately that call for specific bitrates in the specs. But encoding certain types of videos, specifically graphics-heavy pieces with lots of block colors, despite selecting h.264 with CBR of 15mbps or something, when reading the file in VLC or Quicktime, it shows only around 2mbps. It's almost like it's compressing it to a lower bitrate than I set it at, because a higher bitrate isn't necessary for the video. Any ideas? In this example, I'm encoding from a ProRes 422 HQ clip, to H.264 MP4, using CUDA, on an ASUS 3070 TUF.

I am just using AME and I am new, why AME doesn't support Dolby/DTS codecs?

I exported a video with media encoder and deleted the project file fr character Animator and now I don't know how to get it back and i even don't know how to remove the black background in after effects of exported file i just want my project file back so that i can put a background but i don't know what to do now please help!!

I can't get it to work. I have a problem with opening and using Media Encoder. I di reinstall app, it didn't help.  

Hello, I'm hoping one of the pros here can help me diagnose the AME render error I get when I try and render this video. I've tried rendering on my home computer and it works but when I render on my work computer it fails. I've attached the error log. TIA ~Amy  

The CC previously installed ME 2021 15.1 and today CC installed additionally 2020 14.9. Why do I need both of them? Should I remain only with 15.1 and uninstall the 2020 14.9?

Documents\mediaEncoder\Common\Media Cache Files

 It worked just fine yesterday. But today, when I was about to output a short video clip, the output video become this:

hey all ,  for some reason media encoder 2021 is canging the out put gamma of the EXR.  i am rendering exr 16bit zip and it used to be ok in previews versions , but sinse i updated the media encoder it is doing that. any idea on what might be the solution   thanks

I haven't been able to open Media Encoder or export from Premiere since I most recently updated Windows 10. I've tried uninstalling and reinstalling both Premiere and Media Encoder, but cannot get Media Encoder 2021 (v15, v15.1 or v15.2) to open. I am able to open Media Encoder 2020 (v14.9) no problem, so I don't understand why I'm having such an issue with the 2021 version of this software?

Hello, How do I restore the green tick, that was visible on a successful encoding? We often have dozens of parallel encodings and this was always the only reliable source for indicating the encoding status. Thank you very much!

Hi,I need the media encoder to make proxies on premiere pro. However when I go to download media encoder is simply says 'waiting' and then says 'installation failed' with no other error message. Can someone please help me? I've tried the trouble shooting online I can findthank you 

Mac Catalina 10.15.7Mac Pro 2019Proc: 3.3 GHz 12-Core Intel Xeon W96 GB 2933 MHz DDR4Vid Card: AMD Radeon Pro Vega II 32 GBAfter Effects Ver 15.2  +  Adobe Media Encoder 15.2. (this did not happen on my mac trashcan and older versions of AE/AME)I render a Prores 4444 with alpha file from After Effects into a watch folder where AME picks it up and converts it to mp4 (yes i dont care about the alpha channel, its for proofing).    The mp4 that it spits out a messed up color version plus its inverted.  Using Software and Hardware encoding in AME results in differing color patterns.  The 4444 file rendered out of After Effects is correctly colored.  See below for settings and input output examples.  HALP!   

I had to downgrade back to 15.1 due to an MXF importer error running 15.2.  The error occurs when attempting to export H.264 from a sequence built with a variety of source files: MXF, APR 422, H.265, H.264 and a variety of LUTs.  This is a typical assortment for my workflow so I downgraded.  I tested several successful workarounds in 15.2 -- 1. disabling hardware encoding and 2. exporting partial sequences with only MXF clips.  MacPro7,1 / MacOS 11.3.1 /  AMD Radeon Pro Vega II

I cant use the latest version of AE and ME. The colors gets all washed out.Have to use the earlier version.../Sofia 

Whenever I am exporting in Media Encoder, my program always brings up a crash report and I don't know why. I've tried both acceleration encoders and they still crash my application. 

How to export to H.265 in 2021?

I was rendring a file using Adobe Media Encoder but it couldn't complete. Is there a possibity of getting the rendered part to play? I lost access to the source files.

GPU usage on my Mac Pro is through the roof -- sounds like a jet engine with all the fans at top speed. Exporting a 30 minute video to H.265 (60fps, 1080p) with one effect (exposure/gamma) is putting both GPUs on the Radeon Pro Vega II Duo bove 80% usage. And it's no faster than the previous version (takes about 15min to export). Mac Pro, AMD Radeon Pro Vega II Duo, 224GM RAM, 16-code processor, Big Sur 11.3 (going to 11.3.1 this afternoon). Fans died down when the export was finished and usage went back to normal. Repeatable.

I would like to stitch multiple files together but, unlike everyone else in the world, would like to add a second or so of blank space between them. that way when I am using them as b-roll I can see where one video ends and the next begins. How can I add blank space between stitched videos?Thanks a ton.Van

I updated my computer to the latest AME: Adobe Media Encoder 2020. When I open the program, the splash screen comes up, then it crashes a few moments later. "adobe media encoder 2020 quit unexpectedly. Click Report to open the application again. This report will be sent to Apple automatically" I started a live chat with a support representative. He asked me to uninstall and then reinstall. I did that. It still crashed. Support tried taking over my screen and reinstalling it themselves but the issue persisted. He told me to restart my computer so I did. Then I tried to open Media Encoder again. The Issue persisted. Support said I need to uninstall ALL OF MY ADOBE APPLICATIONS! I pushed back and said no, I need those other programs to get my job done. Premiere 2020 is working just fine, so that doesn't make sense to uninstall that. Bad idea.  Support says they are going to escalate this to the senior support and will supposedly call me back in 24 hours. I want to note that I find it

Exporting through Media Encoder has been fine up until recently.Now whenever I export a video with audio, the mp4 output freezes a few seconds before the end. I predominantly work in After Effects but have also tried exporting through Premier to test and the same problem happens here too. When I export as h.264 with no audio, the mp4 plays through with no issues.Also I tested as a .mov file with audio and it runs through fine then too. The issue only seems to be when it is exported as h.264 with audio and unfortunately this is the format I need it in! It has only been over the last few weeks that this issue has arised. Please help! x

I have been trying to render my edit for a couple of days now and it renders a little bit and then crashes my computer ! I have tried probably like six times and it keeps happening. Does anyone know how to fix this? My video is about 58 seconds long and I've rendered videos before perfectly. This isn't the first time this has happened but never has it been this many times that it's happened.