Adobe Media Encoder

Had this issue running ME 2020 as well as ME 2022 (22.6.1 build 2) off of a shared server environment on a Mac (os 10.15.7).When sending an output to ME from PP, it will OCCASIONALLY mess up the music edit, especially if there's a cross dissolve involved.Edits that sound perfectly smooth on Premiere or when output directly from Premiere sound fine, but if I send to ME, the incoming music starts at the wrong timecode and sounds completely off.Music is generally mp3 and most often invovles a crossfade at the edit point.The fact that it's unpredictable makes it annoying - it could work 10 times in a row and then on the 11th, the music edit is wrong.***IN EXAMPLES BELOW, listen to crossfade around :29 - this is not even a music edit - just added a cut to change audio levels and added a crossfade betweeen softer and louder sections to simulate a fadeup. Works perfectly in Premiere version, not in Media Encoder version***

Bonjour,Lorsque que j'encode une vidéo, le son est coupé par moment. Des fois, l'encore est nickel mais parfois, ca arrive sur plusieurs vidéos. J'ai réinstallé la totalité d'adobe mais rien n'y fait. Avez-vous une idée? Config PC : disque dur : SSDProcesseur : AMD Ryzen 5 3600Carte Graphique : RTX 3080 FERAM : 4*8GB Corsair Vengeance LPXCG : MSI B450 Tomahawk Max https://www.youtube.com/watch?v=cWMFAHaCglU&ab_channel=TediShiro 31 minute

I'm having the issue with AE-ME for years already: occasionally, when sending a comp from AE to ME, some of the media, like sound in my more recent occurance of this problem, is not passed updated and previous version of the media is used. I observed it many times, even reported it once. My most recent problem is the followingI have a comp with WAV file on a sound layer.I make changes to WAV, I even make sure to manually update the linked media in Project tab in AEWhen I send the comp fomr AE to ME and render it out — the output is still with the previous version of the WAV file.I tripple-checked: AE links to the WAV file that was really updated, when I open it in AE as Footage preview — it plays the updated version, and even the Waveform of the layer reflects that it was updated (like I can visually see that extreme beat is I removed is gone from the spectrum), and if I render out the comp in AE — it uses this right media. But Media Encoder somehow continues to render out the comp wit

Hello all,I am a exporting a sequence from premiere using media encoder and I am trying to publish the video to vimeo directly. However, I am recieving an error while doing this. I am on an annual vimeo start plan granting 60 videos a year. I have currently uploaded 6. Here is the error I am recieving.01/31/2023 03:01:59 PM : Vimeo - File exceeds upload quota of 54 B

Hey there, I have a file that i need to make a clip of  with apple pro res and 48k sample rate and 24 bit sample size. However it seems like my audio is somehow being leveled out (see pic left is OG file and the right is the new). Anyone have an idea as to prevent that?

I'm not even sure if I'm asking the right question, but--I downloaddd the latest versions of AE and AME yesterday (brand new user) and made a short video that included Trapcode Particular. I exported the video from AE to AME and the Trapcode Particular effects are missing from the final product. I'm sorry if this is too broad of a question, but I don't know how else to ask it--What could be causing the Trapcode Particular effects to not show up after being run through AME? I've been searching for a solution for about 12 hours and even ditched sleeping last night, haha. TIA!

Hi there,  I'm creating projects with multiple sequences but when I put the project file in the watchfolder pick-up location, previously it would pick the project up and queue all sequences, now it doesn't do anything.  Doing the same thing but with projects with singular sequences works. Manually adding the project to AME and selecting all the sequences to be queued works.  AME version I'm using is 23.1 Build 81.MacOS Monterey12.4 (21F79) Any advice on this would be appreciated.  Thanks in advance.

Hi all,I've been scratching my head for a long time now about why my M1 Max MacBook Pro 16" (64GB memory) is not getting through my AE renders (rendered in AME). I know I'm asking a lot from my machine, but it is not even close to finishing it's task. What I'm trying to do is: I have 6mins of 360 degrees footage (8K 29,97 fps H.265) in my project that I speeded up to last only 30s. The single effect that I applied is 'Force Blur' (settings: Motion blur samples - 25 / Shutter angle - 500). I'm exporting in 8K 29,97 fps H.265, so same settings as the initial footage. But I'm 45mins in and the remaining time went up from 50min at the start to 7h20min (and still going up...) So, with 10 more shots to go, this is going to take me ages. Mercury Playback Engine GPU Accelaration (Metal) is on. Same as all other optimalisation recommendations I could find on the internet. Any thoughts? I really don't understand why this is taking my spect out laptop so insanely long.&nb

Le message d'erreur est le suivant : L’importateur de fichiers a détecté une incohérence dans la structure de fichier de Composition 1_3.mp4. Bonjour à tous,Je recontre depuis maintenant quelques jours à nouveau le bug connu suivant sur Media Encoder:La lecture et l’écriture des métadonnées (XMP) de ce fichier ont été désactivées.Adobe Media EncoderImpossible d’écrire les données XMP dans le fichier de sortie.J'ai déjà eu à faire à ce genre de bug par le passé mais le simple fait de revenir à une version antérieure suffisait, or là ça n'est pas le cas... Je suis revenu à une ancienne version, changé le destination du dossier de cache média, changé le format d'export et le nom du fichier final ou encore enlevé l'accélération matérielle GPU.Je possède assez d'espace disque pour les exports. Je travaille avec des rush en 4K (4K DCI etc) et je les exports en H.264 généralement (j'ai également essayé d'exporté en .MOV mais sans résultat non plus...).Ma config PC est largement suff

Hi Anyone know how to fix Adobe Media Encoder error 10? Because I want to export my video from AE and it gives me that error and it tells me that it does not have permission to create files, someone knows how to put the permission in windows 10 because I search in YT and I only get videos of the error that it does not open but it does not what I need.

I've been using laptop with the following specs:Laptop Model : Acer Predator Helios 300Edition : Windows 10 ProProcessor : Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz 2.59 GHzInstalled RAM : 16.0 GBSystem Type : 64-bit operating system, x64-based processorGraphics : NVIDIA Game Ready Driver version 461.40 - GeForce RTX 2070 with Max-Q Design.............Adobe Afer effects Version : v 23.0Adobe Media Encoder Version : v23.1Frame Rate : 30FPS-----------------------------------------------------------------------------------My Issue is that i have created a video using Glow, Drop shadow, Gradient Ramp, Freeze Time and some other effects with many layers/files like PNG images, MP4 videos. The video duration is 1:59 secs. CASE 1: When i added the video to AME and starts rendering it showed 30mins estmation time but finally it took 5hrs to complete the render. i'm wondering that why it is showing that much wrong estimation time. CASE 2: I have used same project without Glow effe

I've recently switched to Premiere Pro to edit and I noticed that I could add grain and export it perfectly using Premiere. But when I tried to export with Media Encoder from After Effects it becomes pixelated. I've checked different settings in all programs but I still can't identify the issue. Any help at all would be appricated. 

I've noticed when I've done a fresh install of AME it launches very quickly, just a few seconds. After I've set up my watch folders, 75 outputs to be exact, it takes over 1 mintue to fully launch AME. This is highly annoying for when I need to do a quick transcode to down-rez a file for client approval, fewer than 10 seconds.My question - Is there a way to temporarily disable the watch folders during launch? Perhaps hold the SHIFT key or something similar, which disables the watch folders just for this session but fully restores upon closing and re-launch at another time.

I have loads of 4K footage that I need to make low res proxy files for. I'm working with Premiere Pro 23.1 and Media Encoder 23.1 In Premiere Pro, I right-click an MXF file > Create proxy > which leads me to this screen below I hit 'OK' and the proxy starts to render in Adobe Media Encoder. After about 15 seconds, the proxy fails and when I open the error message, it says "Frame substitution recursion attempt aborting after multiple attempts on file" Any ideas on how to fix this?

Hello,I cannot open Encoder, I use a Mac Os Ventura 13.1, the Encoder version is updated. I receive the message attached and no other explannation. Any ideas? Thanks!

Theoretically simple, but let's say I have a long sequence of repeat loops, with scripting in AE every 5 seconds as the loop repeats certain elements also change. let's say this goes on for a while, and I have over a hundred different loops, I now need to split these into individual files.I've looked around a bit and it seems that Media Encoder and Premiere don't have any way of automating this, I know I know place markers and split by markers but the actualy rendering would still involve manually selecting the duration of each loop, so if anything that's adding work rather than reducing it.Is there any way within the Adobe ecosystem to just split a longer video into multiple 5 second files? This is something a few other video converters (some freeware) seem to have built in so it's curious that I can't find a way within the Adobe ecosystem.

Hi, how do I know when Media encoderhas fiished reering and what's the next step?

Greetings,i've got a problem that is prowling around here for some years now. Unfortunately i do not find the forum's post where it was discussed.Does the MediaEncoder meanwhile support the "comp's frame number" when rendering out PNG-sequences? When i start rendering using ME all PNG-sequences start with frame 000 not taking care of which position i start to render. So existing frames will be overwritten with different/wrong content. Rendering out parts of the animation ist not possible in case you got an idea of producing one row of frames.The AE internal Render Queue allows "[x] Use Comp Frame Number" - but it blocks AE so i can't work on while rendering. Is there meanwhile a solution for ME or at least a plan to fix this issue?Thanks for your response 🙂   Tim²

well exporting adobe shutdown my pc need Help

Desde hace días cuando intento exportar un mp4 desde Media Encoder tengo inconvenientes.Lo exporta pero a la hora de ver el resultado es un archivo dañado de 24 bytes.Ya instalé y desinstalé varias veces AE y ME, seguí todas las indicaciones y no hay forma. Alguien que me ayude?Gracias

Dear AME users, the AME Team would like to extend a heartfelt thank you to all of you who have reported issues and provided actionable feedback. Your input and assistance have been invaluable in helping us continuously improve Adobe Media Encoder. We would be nothing without our users. Thank you for your continued support and for being a part of the AME community! Have a great 2023! Please post all your comments and issues in this forum. We are here to help.

Hi,I have just started using AE CC and I was trying to output some videos but there was some bugs with the time using render queue but I had found the problem and fix it. But while solving this issue I found an odd problem with the Adobe Media Encoder CC. Everytime I click on export to Media Encoder it renders the video with no content just a black blank screen. The temp AE files it generates is fine no issues just the video file is blank. I tried a different animation that I had also created same problem. I got someone who knows AE and he tried using different codecs but its blank too. There is no problems with AE or the working file because I can render videos with no problems using the internal render queue, Its only media encoder having this odd issue. I had tried updating Media Encoder to 7.01 even though its already 7.01 but still the same problem. How do I uninstall and reinstall? I have media encoder cs6 installed on my mac too. Will that cause any conflicts? Currently I have t

Issue popped up today where I can no longer render AE comps in Media Encoder. Always fails with error message: Could not read from the source. Please check if it has moved or been deleted. Nothing has changed from a file location standpoint. Will not connect through Dynamic Link. Tried uninstalling and reinstalling both Media Encoder and After Effects. Tried multiple restarts. Only thing I've updated in past few days in graphics card driver. I am able to queue exports from Premiere to AME and export without issue. Any ideas to fix would be appreciated.  PC/Windows 10GeForce GTX 780, Driver Version 445.87AME: version 14.1AE: version 17.0.6 

Lately, whenever I send a render from After Effects to ME 23.1, and begin the render... in a couple minutes my PC will freeze requiring a restart. After a restart ME performs the render with no issue.Anyone else having this problem? PC, Windows 10 Home v.21H2 

I am seeing a new issue where only .mp4 video encoded produces repeatable lagging output (like duplicate frames, not a player issue) where other formats used in the composition have no issues. This issue did not exist in the previous version of ME. Software and hardware renders produce the same results. The MP4's converted to sequential images produce proper results. The MP4's (that worked before) files are all local. Rendering out of Premiere Pro produces the same results so I don't know where this lives exactly. Recent renders of this edit  with the same video files do not have the issue.