Adobe Media Encoder

Hallo habe folgende Problem beim Upscalen einer 1920x1080 mp4/Mxf auf 3840x2160p. Media Encodererzeugt anstatt der eingestellten 23,976 immer 23,9761 FPS. Diese Datei lässt sich aber nicht konfomz.B. mit Tsmuxer als UHD erzeugen. Die erezugt UHD ist dann nicht lesbar. Erst nachdem die Mp4nochmal mit 23,976 in DVDFab durchläuft ist die Datei problemlos verwendbar um damit z.B. eine UHD zu erezugen und zu brennen auf Disc.Ist das eine Bug von Adobe oder gibts ne spezielle Einstellung? Hello I have the following problem when upscaling a 1920x1080 mp4/mxf to 3840x2160p. Media Encoder always generates 23.9761 FPS instead of the set 23.976. However, this file cannot be configured e.g. generate as UHD with Tsmuxer. The resulting UHD is then unreadable. Only after the Mp4 runs again with 23.976 in DVDFab can the file be used without any problems, e.g. to create a UHD and burn it to disc. Is that a bug from Adobe or is there a special setting?

After Effects v23.0Media Encoder v23.0Windows 1064GB RamVideo Card: Nvidia GTX 1080In AE I have an animation I'm exporting, it has a wav file. A normal boring 16bit 44.1KHz audio file. I can play it back just fine in AE, I can hear it, and it will even render out fine with out using the Render Queue. Using the exact same settings to render it in Media Encoder and it refuses to output audio. If I look at source settings it refuses to see that any audio exists. It randomly works, having done NOTHING differently. It can be 2pm and ME will render audio, if it's 4pm and a dog barks, it will stop working. I want to use Media Encoder so I can queue work. I've read 1000000 posts about this, none of them appear to have my issue where the source shows no audio. I've also had a tech get into my computer and wipe out everything, reset the universe and it worked fine for 1 day. Then it rained outside and now it doesn't. It would be nice if I didn't have to get a tech to make this work everytime.&nb

hey there,when I render using Media Encoder 2023 I must stay around and keep moving the mouse every now and then. Otherwise, the rendering would stop until I move my mouse or click on the keyboard or whatever to get my laptop to be active. it is weird I know. But I will give another example.mid I have a project in premiere and render it using Media Encoder, and go back to my project in premiere, the render will either move very very slow or would stop until I switch to Media Encoder window. Only then, the render would move as expected. If I switch my to premier (or whatever software) the render would stop or move extremely slow. so to get my render done I have to keep watching and monitoring it and make sure it is moving normally or so if it slow I have to move the mouse or the keyboard. I need a solution please another thing, compare to older versions of media encoder, 2023 version is slower and uses less of the RAM and CPU and GPU  as I'm speaking. It re

I just updated Media Encoder to latest 23.0 and uninstalled previous version. Now when I try to use from Premiere Pro - it always says it's not installed. How do I correct this problem. 

in 12.1 (171), in the "effects" tab on the "export settings" window, when "lumetri look/lut" is checked, I can't choose "select" from the drop down menu. when I click it, nothing happens. !

Hallo habe folgende Problem beim Upscalen einer 1920x1080 mp4/Mxf  auf 3840x2160p. Media Encodererzeugt anstatt der eingestellten 23,976 immer 23,9761 FPS. Diese Datei lässt sich aber nicht konfomz.B. mit Tsmuxer als UHD erzeugen. Die erezugt UHD ist dann nicht lesbar. Erst nachdem die Mp4nochmal mit 23,976 in DVDFab durchläuft ist die Datei problemlos verwendbar um damit z.B. eine UHD zu erezugen und zu brennen auf Disc.Ist das eine Bug von Adobe oder gibts ne spezielle Einstellung? Hello I have the following problem when upscaling a 1920x1080 mp4/mxf to 3840x2160p. Media Encoder always generates 23.9761 FPS instead of the set 23.976. However, this file cannot be configured e.g. generate as UHD with Tsmuxer. The resulting UHD is then unreadable. Only after the Mp4 runs again with 23.976 in DVDFab can the file be used without any problems, e.g. to create a UHD and burn it to disc. Is that a bug from Adobe or is there a special setting? 

Hi Community, I was just helping someone with this issue and thought I'd share this helpful tip to batch process widescreen format clips to square.   Create a new encoding preset at 1080 x 1080 (or other square dimensions) with Scale to Fill Selected in the Output panel. Save this preset. For the watch folder, choose this preset in the Watch Folders panel. Drag your clips into the watch folder. The widescreen clips will be punched into the new square format.   Let me know if you hit any snags.   Incidentally, this action is available in Adobe Express under Quick Actions > Resize Video, but not as a batch. It's one at a time. 

When adding soucres to Media Encoder, you used to be able to select multiple comps from an After Effects project, just like you can do with multiple sequences in a Premiere project. Now, you have to load them up one at a time. This takes multiple clicks to locate the project, then wait for dynamic link server to reveal the list of comps...for which you can ONLY select one. Then start over again! This still works for Premiere projects though...select all the sequences you need and they all load at once. ME Version: 23.0 (Build 57)AE Version: 23.0 (Build 59)System: MacBook Pro M1 Max (16-inch, 2021) 64GB SDRAM 

alguien me puede ayudar a conseguir el media encoder 2020?

AME takes like forever to export a videofile in H.264. Tried reinstalling both AE and AME but no changes. Sometimes when the AME is exporting it just quit. Currently exporting a file on 25mb and it's 8h left until finished... Recently updated windows and are working on a Lenovo with Geforce RTX 3070, so dont see why it should be a problem.. 

I want to get older version compatible with the Premiere Pro ver.15.4.5

Hello,Media Encoder 2023 automatically installed itself on my laptop which caused all my custom conversion Presets I created and use for my workflows seem to be gone. Is that true or is there a way I can find them somewhere? Thanks.

Ayer queria exportar unos videos por media encore pero la aplicacion no se abre, espere 15 minutos y sigue igual. alguna falla en la actualizacion o como lo soluciono?

Adobe Media Encoder 2023 is missing the bitrate control slider that existed in < 2022 versions. Maybe my terminology is off but it was essentially how you could control the target bitrate to get a more specific end file size. I've been unable to find it anywhere in the new 2023 UI..

Unable to export from After Effects as adobe media encoder won't even open 'due to unexpected error'. I have tried reinstalling older versions, I have tried restarting my computer. Nothing is working...What do I do from here??

I made this preset last June to output 8 channel MXFs of my spots per our International team's specs so, they can use the audio tracks that make sense for whichever market they happen to be repackaging my spots for: (video)(audio)That used to work fine with the sequence settings I created in Premiere for my International deliverables:(pic. 1 - general)(pic. 2 - general)(settings)(tracks)This worked great until my latest International output, last week. I got a call from International today to say, the MXFs I delivered only had the stereo mixes with no split tracks. I pulled them in, sure enough, they had 8 channels but only channels 1 & 2 had audio.Here's what the sequence looks like when I output from Premiere to Media Encoder:(output sequence)Here's what it looks like when I import the MXFs I create with the above settings back into Premiere; creating a new sequence from the imported clip):As you can see the split audio is there on the output sequence but only channels 1 & 2

Media Encoder se congela al llevar un tiempo exportando o directamente no exporta, he probado con la version 2022 y 2023 y nada, sigue igual. Tengo un Macbook pro 2021 M1

Latest release of Media Encoder changed color scheme to more contrasty version. It is paradoxically now harder to read. Earlier versions had much nicer and more polished color scheme. I wish Adobe wouldn't change interface so much and instead concentrate on optimization and speed.

Please give us the option to use previous UI colour scheme. The current one is really hard on the eyes. The text and "framing" is high contrast and unnecessary. The fonts and overly bright text is headache inducing. The previous UI colours blended and were softer. The new colour scheme makes the UI look cluttered and confusing.Can we PLEASE get an option to switch back to the previous scheme.

I am running the newest release of Media Encoder 2023 (23.0 build 57) on windows and I'm running into an audio mixdown issue when converting a video file. What I do is I take a 16 channel auido track .mov recording from a Blackmagic Hyperdeck and want to convert it to a H.264. Audio lives on channels 1 and 2 in the .mov and 3-16 are blank. In the previous version of Media Encoder (22.6.1 Build 2) the audio would mix down channels 1 and 2 to a stereo track. However when using the most recent version (23.0 build 57) channels 1 and 2 are being mixed down to just the left channel in the stereo mix. I went back to the previous version to export my video and got my expected stereo mix just now. Let me know if I am missing anything. Thanks.

Since updating to version 23 build 57, ME is taking literally 10x longer to export. Is anybody else experiencing this? Ive read threads about older versions yielding the same results and the "fix" was to downgrade to an older version. I would love some input on this. This is definitley challenging my workflow.Last night it took 8 hours to export a H.264 1920x1080 clip, file size 848.4 MB.  This would previously take 7-8 minutes. System infoProcessor: 3.5 GHz Quad-Core Intel Core i5Memory: 40 GB 2400 MHz DDR4Graphics: Radeon Pro 575 4 GB Any useful input would be fantastic. I would love to here from tech support or a mod. Thanks in advance.

Media Encoder no longer opens automatically when I export my Adobe Animate files.

Updating to latest AME 22.1.1 reports:The procedure entry point GetSystemDpiForProcess could not be located in the dynamic link library C:\Program Files\Adobe\Adobe Media Encoder 2022\DisplaySurface.dll Rolling back to AME 22.0 solves this problem so I likely something was broken making the update, or there is some unrecognised requirement.

AME does not open from animate. tried opening it directly but it didn't do anything until i force quit creative cloud suite and all other adobe apps. Then it coudn't get past loading and froze.

So the workflow im looking for is this.1. Send a file to AME2. Have to output to my local disk and dropbox at the same time without writing twice Is there a way to automate this?ThanksJ