Adobe Media Encoder

Just uploaded 

HiCan anyone please tell me how to encode with the following specs? It seems that Media Encoder can't do it. Any suggestions, please? Video Codec: MPEG-2 Program StreamVideo Bitrate: 50Mb/sBitrate Control: Constant Bitrate (CBR)GOP Structure: I Frame OnlyFrame Size: 1920 x 1080 onlyFrame Rate: 50i onlyField Dominance: Interlaced/ Top (Upper) Field FirstAspect Ratio: 16:9 (Pixel aspect ratio 1:1)Chroma Sampling: 4:2:2 or 4:2:0Audio: Linear PCM 2ch, 48Khz, 16bit or 24bitEndianess: Little Endian (Preferred)Audio Levels: -10dBfsBlack Freeze: No black/freeze frames at start/end of commercial

I do not know where to look anymore, and now that rollbacks to 14.3.2 are no more a thing, I'm seriously cornered. When I export my sequences from Premiere 2020 14.3.2 (they are .mov files captured from OBS and exported in h264), the export time is around 20 minutes: GPU usage is almost always capped at 90%.When I do it since any further update, EVEN the 15.0... It becomes an hour, with GPU under 50%.I do have hardware encoding and CUDA on, with a Nvidia 2080S.I really do NOT know what to do. Things are less diverse between versions when turning off hardware and GPUs encodings, but then everything goes far beyone 50 minutes.

Everytime i Export in Priemire pro or Media Encoder it gets stuck on 100 everytime. im a noob at this so idk whats the problem. even if im trying to export more cuts at the time the first one always gets stuck at 100. im working with 40min to 1 hour long videos idk if thats the problem

Im struggling with how to title this question but i'm wondering, is it possible to transcode a PNG/whatever image file sequence if the file structure is, yyyy002, yyyy004, yyyy006 etc... because when i select all of the files, Media encoder assumes its a direct progression from the first file to the last (IE it assumes it goes 2 3 4 5 6 etc..) so when it encodes, every missing frame shows up as that creepy red error screen. You know what im talkin about? Is thier a way to tell media encoder to just render the files sequentially and not look for non-existent frames? this comes from me exporting a png sequence from c4d and then transcoding in ME, but obv my c4d export was done as a png sequence, every 2nd frame for 46 frames. HOpe this makes sense and thank you 🙂

Hello Everyone! does anyone have any presets or suggestions for creating presets I can use for exporting short-form content from Media Encoder for Tik Tok, IG, and Linkedin? I have a gig editing video for those platforms, and I noticed that there are FB presets already, but no presets for these platforms. Thank you for your assistance.

For the past few months my Media Encoder almost never works with AE. I have to render in AE and drop that mov into ME for an mp4.There's the dynamic link errors and something about no connection. I think my laptop is no longer equiped to handle AE and ME. Any help would be very awesome. ThanksChris 

After updating Adobe Creative Cloud today I found out that AME doesn't render vst effects. Export from Premiere Pro works fine.Is there a fix for this? I'm usint Windows 10.Thanks

Hi everyone, I'm having a few different issues but they're all related to trying to get DXVs exported through the encoder.  The first problem I'm having is that the files are being exported as .movs. I *do* have the Resolume plug in for the DXV format. If it helps solve the problem, I'm having the same issue with Resolume Alley (Resolume's own media encoder)How do I get these programs to export in DXV? (this only applies if I have to use .movs) The second problem I'm having is that some of the footage I exported is showing up as being half a gig, while other files of the same length are much smaller. I did both of these exports back to back and as far as I can tell I didn't do anything different between the two. They look identical when I look at their properties in every way except their size.How do I get these to export in a proper size? Thanks in advance for the help 

I'm so f*ing tired... In short, I can't render stuff from AE by choosing 'Add to Media Encoder queue'. I can add to the queue all right, but as soon as I either click the green Play button or click on the preset to edit settings, it's stuck on 'Establishing Dynamic Link Server connection' (or whatever it says), and after a couple minutes of this, it plays a goat-like error sound, and that's that. I have tried EVERYTHING. Every tip or idea or workaround from the forums here or places like Reddit, and NOTHING fixed the issue so far. I'm on the newest version of all CC apps, macOS 10.15.7, I have granted Full Disk Access to Media Encoder, AE, Premiere, AE Rendering Engine and anything else that somehow made sense. Firewall or antivirus are not an issue either. Tried re-installing,  resetting preferences... And the worst thing is, this issue goes back at last a year (if not more), so it's neither new nor tied to any recent updates (none of them fixed it, though). I can

since updated, it hasn't worked! doesn't even open, I uninstalled and re-downloaded i did everything what i can. Media Encoder 14.9 crashes on startup.

I have 8mm video tape that I have imported into my computer.  It is 480i and I want to convert it to h264 to stream on my 4K TV.  Can anyone recommend the best settings?  I'm thinking about h264 match settings or h264 match settings progressive?

Make a simple sequence of videos to post on Facebook and Instagram. São 4 takes in MP4, takes one in MOV and Texts. Everyone uses transparency. When I tried to render the problem that I illustrate in the images below. I only succeeded in rendering it correctly when I used another computer (youtu.be/i-msbyC6hH4). Can anyone help me / guide me how to fix this problem?  

Fiz uma sequencia simples de vídeos para postar no Facebook e Instagram.São 4 takes em MP4, take um em MOV e Textos. Todos usam transparência. Quando tentei renderizar tive o problema que ilustro nas imagens a seguir.Apenas tive sucesso em renderizá-lo corretamente quando utilizei outro computador (youtu.be/i-msbyC6hH4).     Alguém pode me ajudar / me orientar como corrijo este problema?  

I am encoding a Premiere Pro sequence in Media Encoder - both are the latest versions. The video is for broadcast TV which is asking for H.264. I'm using Match Source - Adaptive High bitrate. The spec sheet from the TV station also asks for uncompressed audio, 48kHz. Uncompressed doesn't seem to be a choice. Audio format settings are AAC and MPEG. Which one should I choose? If the answer is MPEG, which setting: MPEG, Layer 1 or MPEG-1, Layer 2?  I see that within MPEG the bitrate goes to 448 kbps, whereas in AAC it only goes to 320 kbps. Should I go with 448? There are many more audio settings choices within MPEG as well, which I'm unsure about.  I'm not seeing any answers within Adobe or the internet at large.  Thanks. 

Hi there, Please can someone help? I've read through all the threads on here about ME 'Connecting to Dynamic Link Server' issues and I don't think I can see issues the same bespoke issues I am. As per the Subject heading, I'm using the latest version for both (2021: AE 18.0 and ME 15.0) and I also tried installing (2020: AE 17.7 and ME 14.9) for each with no joy either. Macbook Pro '15 2019Processor: 2.4 GHz 8-Core Intel Core i9Memory: 32 GB 2400 MHz DDR4Graphics: Radeon Pro Vega 20 4 GB Anything anyone can do to help me would me MASSIVELY appreciated. Thank you ever so much in advance.Gary  

When exporting from an After Effects project, Media Encoder will quit halfway through the job without any error logs. This started happening after the most recent update. It happens with the H.264 and HEVC (H.265) encoder. Using gpu acceleration makes Media Encoder quit after reading the XML files, and using software only lets the project get about halfway through before crashing. Changing the preset does not change the outcome. Changing the file destination does not change the outcome. Any ideas?PC SpecsGPU: AMD Radeon RX 5700 XTVRAM: 8176 MB Memory: 16GB GDDR6 1750 MHzCPU: AMD Ryzen 5 3600 6-Core Processor - 6 Cores 

After the 15.0 update all of my custom presets are gone. I tried to import my backup presets. It says NOT COMPATIBLE. What to do?

Hi All, I have an editing job for which I get mp4 video files from someone that Premiere won't play. Turns out Media Encoder isn't able to convert them to a viewable codec either ("source compression type is not supported"). VLC player does play the files, and is able to convert them to an mp4 version that is playable in Premiere, but since VLC on the Mac has no batch conversion it's not very practical to use that. I've attached a screenshot of the "media information" that VLC is able to show on one of those clips. Maybe someone can tell me why Premiere/Media Encoder can't play/convert them? Any tips on a batch converter that can? Thanks! Harald

Hello, I am having issues with Adobe Media Encoder. I have an AU Pitch effect applied to audio within a nest in Premiere Pro, when I try to export the file through Media Encoder this effect is removed, however when I export through premiere pro I have no issues. I have the most up-to-date version of both of these programs. I have tried uninstalling and reinstalling both of these programs and I have tried clearing the media cache and the same problem remains. I have a lot of similar videos and want to batch export using Media Encoder, but it has the same problem on all of them, making me have to export them one by one through premiere. What am I doing wrong!

Im trying to export my videos from AE to Media Encoder, but is not working!!!!!!

Media Encoder v 15.0 failing on start up. Dialogue box pops up that states, "Adobe Media Encoder Error Adobe Media Encoder has encountered an unexpected error and cannot continue." I've tried uninstalling and re-installing and haven't had luck. Has anyone else encountered this issue? If so, what were the steps taken to resolve the error?  

8 hours to finish to get a one minute video i'm using imac with all up to date8gb ramintel i9 processor12 gb graphic cardi using 6 gb ram for only adobe

Please help me!!! Dynamik Link never conecting! 

Hi, At V 15.0 ME I get the follwing error:  I'm glad that I found out that in V 14.9 I don't get the error. Does someone why becausesooner or later I have to Update the Me... Thanks! 🙂