Adobe Media Encoder (Beta)

Hello,I downloaded the Beta version of Media Encoder and tested it yesterday (May 19, 2020). It worked very well with my GTX Super 2080, taking about half the time to convert a 1080P sequence to .mp4.I downloaded the AME update from this morning/last night, and now, it says my machine is not up to standards/specs for it to work. Whaaa? You're killing me, it would be such a desperately needed productivity boost, since it could shave HOURS off of my work week.Note: the current stable-release version of Media Encoder also does not, and never had, allowed me to utilize the NVIDIA GeForce RTX 2080 Super for hardware accelerated compression. Why?Perhaps the Beta is now incorporating some code from the stable version which prevents AME Beta from using that GPU? Might it have been yesterday's MSFT updates? I have been told this might be an issue because I have an older CPU, but it was working perfectly for me yesterday. I have attached a screenshot of the error, along with a text file of PC sp

We are switching the LUT interpolation method of Media Encoder to use a more precise calculation method called Tetrahedral interpolation.  The previous method is called Trilinear.  The result is smoother gradients and better-looking results when applying LUTs   Below is an extreme example for illustrative purposes:    ORIGINAL: Your basic ramp . . .     TRILINEAR (old method):   Notice the severe banding.  This occurs when you have smooth gradients and the LUT doesn’t have enough precision to handle the small steps.  In practical terms, outdoor shots with a blue sky are a good example of smooth gradients that you see often.    TETRAHEDRAL (new method): Notice the smooth gradient.  Tetrahedral uses a superior method to interpolate values in between the steps, so even with a low precision LUT, you get very good results.   Tetrahedral LUT interpolation requires GPU processing and is a little bit more computationally

Media Encoder freezes when encoding.When I restart Aerendercore, it works for a while until it freezes again. I have Macbook Pro 14" M1 Pro 10core , 16gb ram. thanks

There's a bug where the rendering overflows in the middle of m1 max.And it's very slow and the cpu usage is too low.(Cpu usage drops in the middle and it overflows)And GPU usage is too low.

22.2.0 Build 18 So I'm trying to export a 1-hour VHS transfer in 480i to h.264 Match Source Adaptive High Bitrate.In 22.2 build 18 it runs in fits and starts.  It will crank up processor fan while it writes for 10-15 seconds, then stops for 10-15 seconds. Visual progress in the encoding panel shows the stop/start Graph in Task manager shows processor and GPU running and stopping. After about 5-6 mintues of this up/down start/stop. Eventually, betweek 6-15 minutes into the 60 minute program, the render aborts with the following: Export ErrorError compiling movie.Export ErrorError completing render.Writing with exporter: H.264Writing to file: \\?\E:\Transfers\Frolick\Frolick VIdeo\Sequence 01.mp4Writing file type: H264Around timecode: 00;16;05;06 - 00;16;06;04Component: H.264 of type ExporterSelector: 9Error code: -2147483648------------------------------------------------------------- Encoding Time: 00:11:3112/18/2021 12:34:50 PM : Encoding Failed-------------------------

The usage of cpu and Gpu is low and too slow.(Using After Effect)4k 60fps video encoding.

AME 22.2 Build 18 I'm still unable to complete an export of this footage. I get the following error: Error completing render.Writing with exporter: H.264Writing to file: \\?\E:\Transfers\HollandFilms\Holland 16\Holland 16_14_Wau_Sept1963.mp4Writing file type: H264Around timecode: 04;28;08;14 - 04;28;09;14Component: H.264 of type ExporterSelector: 9Error code: -2147483648 It progresses about halfway through the clip then errors out.The file name (above) still has that \?\ in the filename which it should not have.Also the timecode is wrong. This clip starts at 2:12:19;17 and ends at 2;30;46;01 on the timeline. Premier is updated to 22.2.0 Build 53. Footage is 16FPS in a 30p timeline, so it is being time interpolated. The thing is, it completed 12 renders of other clips (in a previous build) so it should work. There are no edits to the clip. It is AVI with MJPEG codec from a 16mm silent film transfer.  Now it can't complete a render of anything, even ones tha

22.2 Build 18 Suddenly can no longer render anything. If the program doesn't crash it ends with the following error code: Export ErrorError completing render.Writing with exporter: H.264Writing to file: \\?\E:\Transfers\HollandFilms\Holland 16\Holland16_Reel10_1939Family.mp4Writing file type: H264Around timecode: 00;48;38;18 - 00;48;39;18Component: H.264 of type ExporterSelector: 9Error code: -2147483648 The clue here is that it says "\\?\E..." The drive array spins up and I hear it writing, but nothing is saved. On normal renders that are cancelled, there is no "?" in the path.

AME 22.2 Build 9 Get a total machine lockup while rendering, twice now. Source is AVI with MJPEG codec 1080p 15fpsDestination is h.264  1080p 30fps, with Optical Flow, no audio

AME 22.2 Build 9  Windows 11, nVidia/.Intel GX on 11th Gen I-7. I noticed rendering going very slowly using a preset that just the other day zipped right along. Previously I noted in Task Manager that both the Intel and nVidia GPUs were engaged. Today only the nVidia GPU is engaged, and the processor is running at 100%.  Did something change in Build 9???  

22.1.1 Build 8I wondered why I all of a sudden got huge exports when I was just exporting a small section through AME.AME is no longer respecting the work area bar selection in Premier. Steps to reproduce:1. Make sure Work Area bar is engaged2. Move Work Area pointers to select a section of a timeline3. Export. Confirm that "Work Area" is sthe selection4. Send to Media Encoder. Result:In Media Encoder, click the preset to observe parameters.Note that the entire timeline has been queued, not the selection made with work area bar.Also note that Source Range no longer has "Work Area" as an option. Workaround:Use in/out, but if an editor is used to the work area bar, this is a problem. FIX: Either include Work Area as before, or retire the work area bar in Premier. "It's not a bug, it's a feature."

I am not able to export my scenes from adobe animated character v22.0 to adobe media encoder. It is just hung in the mid , please  find the log below, - Source File: /Users/sindhujamahalingam/Documents/Adobe/Character Animator (Beta)/Character Animator Project 2/Character Animator Project 2.chproj- Output File: /Users/sindhujamahalingam/Documents/Adobe/Character Animator (Beta)/Character Animator Project 2/Scene - Hunter 2.mp4- Preset Used: Match Source - High bitrate- Video: 1920x1080 (1.0), 24 fps, Progressive, 100 (63% HLG, 51% PQ), Hardware Encoding, 00:00:30:00- Audio: AAC, 320 kbps, 48 kHz, Stereo- Bitrate: VBR, 1 pass, Target 10.00 Mbps- Encoding Time: 00:00:3609/30/2021 05:05:00 PM : File Successfully Encoded09/30/2021 05:05:00 PM : Queue Stopped10/01/2021 04:04:40 PM : Queue Started10/01/2021 04:14:16 PM : Queue Started10/01/2021 04:14:30 PM : Queue Paused10/01/2021 04:16:37 PM : Queue Started10/01/2021 04:35:24 PM : Queue Started10/01/2021 04:35:36 PM : Queue Paused

Steps to reproduce:    1. ... Queue several items from After Effects Beta to Media Encoder Beta2. Start render queue in Media Encoder Beta Result: ... After only one or two items, ME gets stuck at 'Connecting to project' and will not progress any further. Quitting ME and relaunching usually fixes but not always, and you can end up with more than one instance of dynamiclinkmanager.app running Expected: ... ME should behave as ME 2021 and successfully process each item in the render queue. System info    Application: Adobe Media Encoder (Beta) v22.0.0.72    Application: After Effects (Beta) v22.1.0.2    OS: macOS v11.6.0, RAM: 64.00 GB GB, CPUs (logical): 20 

Yo,   I was trying to create proxies from the project by selecting the specific files and ctrl-clicking, create proxies.The first set worked, launching ME beta and processing began.   While that was happening I found another few files that needed the same treatment.I selected those and followed the same steps.    It immediately crashed PP2021 beta, but did send those files to ME beta and they were completed.    Application: Adobe Media Encoder (Beta) v22.0.0.72    OS: macOS v11.2.3, RAM: 64.00 GB GB, CPUs (logical): 16

M1チップ用のベータ版After Effects、Media Encoderを利用しています。After Effectsにて完成したコンポジションを選択した上で「Adobe Media Encoderキューに追加」を押しているにもかかわらず、Media Encoderが立ち上がってから30分程度経ってもMedia Encoderのキューに追加されません。どうしたら良いでしょうか？

왜 이지랄로 프로그램을 불안정하게 쳐말들어놓고 돈받아 쳐먹냐? 한두번도아니고 일반버전으로도 계속 렉처먹고 되다 안되다 반복해서 베타버전으로 했는데도 되다 안되다 지랄을 하네 안될거면 처음부터 멈추던가 후반부 무거운 작업도 아닌데 처멈추냐고 이럴거면 돈받아 쳐먹지말고 공짜로 내놔라 진짜 개선할것도아니고 언제까지 맨날 인코더로 속상해야하냐? 하루이틀이냐 몇년을 썼는데 쳐 바뀔생각을 안하네 이지랄로 프로그램 만들거면 개발중단때리고 개인들한테 넘기던가 블렌더처럼 열린개발해라 진짜 뭐같아서 못써먹겠네 기한 못맞춰서 위약금 나오면 니네가 배상해라

- Encoding Time: 00:40:4708/16/2021 06:24:40 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Accelerated Renderer ErrorUnable to produce frame.Writing with exporter: H.264Writing to file: /Users/larrygray/Desktop/RUSTLER VIDEO/NOOB DIARIES VERSIONS/NOOB DIARIES RUFF CUT 3_1.mp4Writing file type: H264Around timecode: 00;00;17;12 - 00;00;17;15Rendering at offset: 17.434 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695------------------------------------------------------------- Encoding Time: 00:38:4708/16/2021 08:21:46 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Accelerated Renderer ErrorUnable to produce frame.Writing with exporter: H.264Writing to file: /Users/larrygray/Desktop/RUSTLER VIDEO/NOOB DIARIES VERSIONS/NOOB DIARIES RUFF CUT 3a_1.mp4Writing file type: H264Around timecode: 00;00;18;09 - 00;00;18;12Rendering at offset

Two Bugs:ONE media encoder BETA didnt copy my system information when I clicked report bugs.SECOND bug. ME beta freezes on export. SYSTEM SPECS: OS Name Microsoft Windows 10 ProVersion 10.0.19042 Build 19042Other OS Description Not AvailableOS Manufacturer Microsoft CorporationSystem Name DESKTOP-ELDGQNLSystem Manufacturer System manufacturerSystem Model System Product NameSystem Type x64-based PCSystem SKU SKUProcessor AMD Ryzen 7 3700X 8-Core Processor, 3593 Mhz, 8 Core(s), 16 Logical Processor(s)BIOS Version/Date American Megatrends Inc. 1201, 9/9/2019SMBIOS Version 3.2Embedded Controller Version 255.255BIOS Mode UEFIBaseBoard Manufacturer ASUSTeK COMPUTER INC.BaseBoard Product PRIME X570-PBaseBoard Version Rev X.0xPlatform Role DesktopSecure Boot State OffPCR7 Configuration Binding Not PossibleWindows Directory C:\WINDOWSSystem Directory C:\WINDOWS\system32Boot Device \Device\HarddiskVolume4Locale United StatesHardware Abstraction Layer Version = "10.0.19041.1110"User Nam

Hi, Just installed the new update for premier beta. I'm unable to open the app so I had to report the problem here. I have uninstalled & reinstalled but no luck. This is the error I'm seeing and wanted to let you know.  ThanksMoe    

This is obviously not anything urgent or app-breaking. It does annoy me that there is a lack of continuity between the size of the icons though. 

I tried to upload one file and the file name of the project is not in english it's in another languge and it gives me like this 019 ዮናስ ሃይለ á‹˜á‹­áŠ­áŠŁáˆŤ የለን_FTP.mp4

When sending something to queue in adobe media encoder from Premiere, it doesn't go. Encoder opens, but then nothing happens. 

From Premiere Pro Beta, I'll queue a specific part of my video for export via the "work area bar" to Media Encoder, but when actually encoding in Media Encoder Beta, it'll export the WHOLE video despite me specifying only a part of the video.  No issues when exporting directly from Premiere Pro Beta.

Steps to reproduce:    1. start ame_webservice_console.exe Result: ame_webservice_console.exe crashesExpected: to start System info    Application: Adobe Media Encoder (Beta) v15.3.0.9    OS: Windows v10.0.19042, RAM: 15.78 GB, CPUs (logical): 12

When exporting most of the export is fine maybe going as high as 50% but at one moment or early in the export my MacBook pro M1 peaked and the fan was crazy.