Bridge

The backslash/downslash key crashes bridge. I believe this key has been used in the past to show a before and after when using Bridge Raw masks and specifically brushes. Now the application appears to crash if you accidentally push this key. I just lost a lot of work with Raw brushes because Bridge crashed and did not save my work.

When I convert ARW's to DNG I see this minor warning with Exiftool:"Bad IDC_IFD SubDirectory start" The photos are taken with Sony A7M3. Firmware is 4.01.Adobe Bridge version 14.0.1.137

Will remove non-keyworded images found when no-keyword is chosen from keyword list initially, then hangs. Works briefly after restart.Bridge 14.0.1.137Mac OS Sonoma intel

I often create stacks from Bracketed sets of photos I shoot doing real estate, so I can compile them into HDR. When sorting through the stacks, it won't consistently show the first shot taken as the main thumbnail. It will often cycle to other images in the stack, some of which are very dark exposures from the bracket. This is very difficult when trying to sort through the stacks to select the images I want.

On Adobe Bridge version 14.0.1.137, on Windows 11 Razer Blade 15 (2018) laptop.When attempting to save HEIC images to smaller JPEG formats using Export Presets, the resulting images are being resized, despite the Scale Image setting under Image Resize being set to 100%. In my tests, 4032x3024 images are being resized to 2048x1152. Also, the DPI is changing to 300 dpi from the original 72 dpi, despite this not being requested. Attempting to use the 'Resize To' option also fails. Setting options to fit the long edge to 5000 px, and checking Don't Enlarge, still leads to 2048x1152 images, although at least when setting the DPI to 72 here, it keep it as 72 in the result.

Cannot consistently rename or batch rename .mxf video files in Bridge (v12, 13 or 14.)When trying to batch rename, all files are usually skipped. Sometimes (after restart) all but first and last file selected are renamed. No error message.Cannot rename single .mxf, either. Error message reads that file is in use by another process. After restart one file can be renamed once - only once.XML, txt & mp4 files rename as expected.Windows 11 (22H2)

I used to be able to select JPG compression when I output to PDF, and my multi page documents were always under 5mb. What happened to the compression options? They are no longer there. My PDFs are now over 25mb, and that is after reducing the quality significantly. PLEASE bring back the compression options.

every time I open bridge it pops up with a new window error

Hi!I tried to rename folders with Japanese text, but the homophone selection field blinks and moves at high speed, making it difficult to fill in. With English text, the selection fields don't blinks nor moves. Why it happen? Is it a specification to prevent garbled characters?

Bridge 14.0.1.137 crashes my Windows 11 computer BSOD when trying to AI Enhance more than one image at a time. This has happened several times now.I've not tried doing this on previous versions, so don't know if it's a new problem or not...OS Name Microsoft Windows 11 HomeVersion 10.0.22631 Build 22631System Manufacturer DellSystem Model XPS 15 9575Processor Intel(R) Core(TM) i7-8705G CPU @ 3.10GHz 3096 Mhz 4 core(s), 8 Logical Processor(s)Installed Physical Memory (RAM) 16.0 GBTotal Virtual Memory 41.8 GBPage File Space 26.0 GBDrive C:File System NTFSSize 500 GB SSDFree Space 88.4 GB

Newest update as of 10/01/24 doesn't allow me to open files in ACR. Some files open, some don't. It doesn't allow me to label the images either. I have to go to Open-Browse and then select Photoshop 2024 (up-to-date version) to open all the files in ACR. Working on a 2019 iMac on Sonoma 14.2.1. It's seems like some CR3 files are now Camera Raw files and open in ACR OK. But CR3 files don't. File type association shows CR3 should open in PS4.

(1) When using stacks to group/organize photos/videos with Bridge 14.0.1.137 with "Sort Manual" selected, the sort order of the stacks and ungrouped pictures would change after certain operations. For example, when modifying the description field in the IPTC metadata for multiple objects, the sort order would change mixing up both stacks and ungrouped objects. Needless to say, this is the anthesis of organization. (2) When expanding stacks (ungrouping), the thumbnail object remains at the original location of the stack and ALL THE OTHER objects are placed at the end as shown in the attached screenshot--note the one "King's Rooms" item that was in the position of the stack and the others at the end. The expectation and proper operation should be to expand the stack in place.One last thing, stacks are not easily movable and sometimes moving a stack would cause the thumbnail only to move and sometimes cause the reorder problem. IMO, a stack item should only be removed from the group

When I load a file from bridge and work on it and save back to bridge with a different extension the go back to bridge the file is where I saved it (usually the same folder as the source file). I then move the file to a new destination folder. I checked the folder and it is there. But after a short time it reappears in the source folder and eventually disappears from there also. If I move via a windows file manger this does not appear to happen, if I can get there before Bridge removes it all together. Any ideas?

Radial and linear gradients are snapping to weird sizes when trying to adjust them. Can't get the size preferred. Brushes are not performing correctly either on add or erase, won't work in all areas as usual. Using camera raw. 12.13.23

Bridge version 14.0.1.137. Mac OS 14.2Doing almost anything brings up the spinning beachball for 10-15 seconds. It is unusable at this point. Just clicking on the Help menu to get here gets a wait as well as checking the version number. I have restarted my Mac and tried to use it with no other applications running, but it made no difference.

Sort Manually is not working in this version - Adobe Bridge 2024 V 14.0.1.137Please address

Bridge 14.x does not show the embedded color profiles of at least Illustrator and Acrobat files. (AI and PDF). In the metadata section it simply says next to Color Profile: Untagged.But these files do have embedded Color Profiles. 100%.Bridge is simply not reading them. These are Adobe native files. Bridge should be able to get all available information out of those files.

When I try to delete a .jxl photo in bridge, it also deletes the original raw file and the .xmp Why is that?

When I open my images in Camera Raw directly from Bridge, my external GPU (NVIDIA) is not found and gives me an error (GPU acceleration not available).It only works when opening Camera Raw via Photoshop.Please fix !

Workflow change format from PSD doesn't work. Bridge can't save PSD files as JPG (for example).

Workflow Resize To Resolution doesn't seem to do anything; Resolution not changed to input value — seems to not change value.

We are digitizing alot of glas plates in our museum and we use Adobe Bridge for metadata and raw editing. Our problem is when we export the pictures in Bridge (versions 2022, 2023 and 2024) the export does not include the mirroring of the picture we do in Camera Raw, but all of the other alterations made in Camera Raw are included.

Simple workflow not working error mesage states "File type not supported" when resizing CR2 files

### en_USUntil Adobe Bridge 2022, AppleScript was supported and "do javascript" commands could be executed. This allowed for integration, such as sending Finder selections directly to a scripting process in Bridge.However, since version 2023, AppleScript is no longer supported. There is no AppleScript dictionary sdef file in the application bundle, so there is no possibility for it to work. Even if the sdef is ported from 2022, it will not work.I have determined that this is a bug, as there seems to be no official information that AppleScript has been removed. It is an expected specification of Adobe Bridge to support AppleScript.#### Environment* macOS 12.6.7(Apple Silicon)* Adobe Bridge 2023(13.0.4), 2024(14.0.0)### ja_JPAdobe Bridge 2022まではAppleScriptに対応していて、"do javascript"のコマンドを実行できました。これにより、Finderの選択をBridgeのスクリプトプロセスに直接送るなどの連携ができました。しかしバージョン2023以降はAppleScriptの対応がなくなりました。アプリケーションバンドルの中にAppleScript辞書sdefファイルが存在しないため、動く可能性がありません。2022からsdefを移植しても動きません。特にAppleScriptを削除したという公式情報は存在しないよう

A double click on a psd should open Photoshop, but it opens Illustrator under Windows 10. My bridge is version 13.0.4.755.