Bridge

I have been using adobe camera raw as my primary image preview option, but once again, I'm trying to see if Bridge review mode can be more functional for me.  I'm finding it more helpful than I did at first but want to see if there's anything I can do to make it even more efficient for me. The primary stumbling block for me is seeing the images at an appropriate resolution. A majority of my photography is quite close-up macro, often an extreme macro with extension tubes, where I'm taking handheld images of bugs and very small flowers in natural light.  Moving air, camera shake from even what feels like a very steady position to me, and even the impact of a little ant climbing about on a very small flower on a very slender stalk is enough to shift that very shallow vocal plane, so once I've got something I'm trying to capture, I may shoot five or 50 or 100 shots in close succession.  That's a lot to sort through to find the ones where the focus is spot on, with the p

I’ve been trying to use the Bridge Workflow panel to automate modern web exports from layered PSD files — converting from FOGRA39 to PNG or WebP in 2000px output — and after hours of testing, I found that the system only works reliably with basic JPEGs.PSD export fails when:The file is in bitmap (1-bit) mode.Any layer has a mask, even if it’s the only layer.There’s a locked background layer, even hidden.The bottom layer is locked, regardless of content.→ These files are silently skipped in export. No error. No result. Nothing.Expected behavior:If I uncheck “Transparency” in export settings, I expect Bridge to:flatten the image automatically,ignore masks, hidden layers, or locked backgrounds,and export reliably to PNG or WebP.Instead, the system quietly fails — and requires manual preprocessing in Photoshop, like adding a dummy layer and merging visible layers, before it works.Workflow panel is unusable for modern export:WebP is not supported at all.PNG export fails unless PSDs are flat

Bonjour, contrairement aux versions précédentes de Bridge je n'arrive pas à afficher mes sélections (étoiles et ou couleurs) en affichage plein écran. Quelqu'un peut-il m'indiquer comment faire ?

Hallo, leider funktioniert die manuelle Sortierung nicht mehr 😞Erst mal kann ich sie manuell sortieren. Aber kurze Zeit später, werden die Bilder automatisch wieder zurück sortiert. Leider habe ich noch nicht wirklich rausgefunden, woran es liegen könnte. Wirklich von der einen auf die andere Sekunde, sind die Bilder aus der Sortierung verschwunden.An den Sortierungseinstellung ändere ich während der Zeit nichts. Es beleibt auf "Manuell" eingestellt.Hat jemand eine Idee oder ist es wirklich ein Fehler?

Since a few months I started having some corruption issues with my RAW files. In the begining the issue  seemed appear randomly. When viewing in Bridge the photos in my SD, a few of them would look funcky and the problem would persist when opening them in Camera RAW. When trying to open those files in my computer (macBook Pro M1), the files would keep looking funcky. So I had to delete them and I started thinking that there was soemthing wrong with my camera or SD card. After trying it with other SD cards and even buying a new one, the problem persited: Some of the images would look funcky. I started fearing that my camera was damaged (canon 6D Mark II, firmware: 1.1.1). Nevertheless, after spending several hours doing multiple tests, I am confident to say that trying to view my RAW files in Bridge before transfering them to my computer is corrupting them. However, it does not seem to systematically corrupt every file, but some of them. The onlt way to avoid them being corrupted i

Can anybody explain or offer a solution to why Bridge shows a different time stamp to Windows 11 on video files MP4 created on my Canon R6Mk2.I have never had video creating capability until I purchased my Canon R6Mk2 so this problem is new to me and unknown if this a new bug in Bridge or been there for some time.Windows 11 is showing the correct timestamp for the file created in camera, but Adobe Bridge shows the timestamp for the file created as 1 hour earlier than windows. This means when I try to sort files in Date/Time Created the video files are always out of sequence.Yes, I can go in and manually adjust the creation time, but it's a pain 1) having to do it every time, 2) having to do it all.The First image attached shows Windows Properties with the correct file time stamp.The second image attached shows what Bridge is doing and adjusting the file time stamp by an hour, and it is this which appears to be used when sorting by Date/Time. I have spoken to Canon, and they confir

How to disable or change the color of those blue borders around active panels and photos?I would like to have my UI without those distracting colors. In Bridge 2022 there were no borders and it was fine. In Photoshop, there is a setting to choose the highlight color and enable natural color mode. Can we have the same in Bridge please? 

I have an ongoing issue with Bridge. Almost every time I use it to make a contact sheet, it'll display an image incorrectly. not something like greyscale vs colour etc. but an entirely wrong art file.  I'll drop in two files, one with print art and one with finishing/cut files etc. The preview will show two print files, but usually output the contact sheet as expected. Sometimes though, it'll output the preview and I get two copies of the print file.  The only thing I've found that fixes it in the short term is to quit and reopen, but that's just a temporary fix as the problem comes back after about 10 minutes. So, what's going on and how do I fix it?

Estimado equipo de Adobe:Me gustaría reportar un problema persistente en Adobe Bridge. Desde las últimas versiones (especialmente a partir de Bridge 2023), el comportamiento del zoom con la rueda del ratón resulta errático e incontrolable. Al desplazar la rueda tan solo una vez —tengo un ratón cuya rueda funciona con clicks para avanzar y funciona correctamente en las demás funciones y programas de Adobe—, el programa aplica un zoom que continúa incluso después de haber soltado la reuda del ratón y que no se puede detener mediante clicks o girando la rueda en el sentido contrario. No he encontrado forma aparente de detener el efecto una vez iniciado, más allá de salir de la vista previa o cambiar de archivo.He comprobado que en las preferencias actuales ya no existe la opción para desactivar el zoom con la rueda del ratón, lo cual agrava la situación al no poder evitar este comportamiento no deseado. Tampoco hay respuesta útil al hacer clic en la imagen: el zoom simplemente altern

Just updated to Bridge 15.1.0.635 , Adobe Camera RAW 17.4.1 and Photoshop 26.8.1 When using ACR from Bridge to Photoshop, Photoshop opens, no photos load, Photoshop hangs and becomes unresponsive.Fresh installs have been made by deleting previous settings and all related files and Windows machine also has been factory reset.The problem is still prevalent since the update. I shoot RAW using OM System OM1-Mark II and ORF Raw files. I put RAW files ontop computer SSD Open in Bridge, edit in ACR  and if I do NOT use the super resolution - click open - opens in photoshop fine. No problem here. Repeat the above, but then click super resolution - pop up flashes and states "updating AI settings x of x" which I assume is working 1 of 5, or 3 of 5 photo.Then click open in Photoshop.Photoshop opens with a delay - no photos loaded - Photoshop hangs and becomes unresponsive. So I delete those ORF files and use a fresh set. Open directly in Photoshop, ACR pops

I'm tidying (and adding keywords to) an awful lot of images in my library at the moment. I've been trying to find out how to create a Keyboard Shortcut to appy Metadata edits once I've made them.It's so clunky having to use the mouse to find that little Apply button (tick). If anyone could tell me how to create the shortcut, I'd be very grateful.Thanks,Andy

Hallo liebe Community, ich hatte bisher mit Bridge in all den Jahren noch nie Probleme. Seit ein paar Tagen tritt aber folgender Fehler auf: wenn ich Bridge starte erhalte ich sofort eine kleine Fehlermeldung, die ich nur mit OK bestätigen kann. Nachdem ich das gemacht habe, beendet sich Bridge von alleine – ohne die Option eines Absturzberichtes o.Ä..Danke schonmal für Tipps und Hinweise.

What is this icon in Bridge called and where can I control it. I am using an older version of Bridge because I lost this Icon in the new version and cannot figure out how to get it back 

I’m experiencing a strange issue when using Batch Rename after changing settings in Camera Raw 17.3.1. The RAW image loses its connection to the XMP data file. Look at this screenshot:  If I copy the new file name and paste it again — the problem remains.If I change the sequence number at the end from “03” to “04” — the problem is solved.If I change the sequence number again from “04” back to “03” — it works fine.If I type a completely new file name, everything is OK. I reset the preferences — didn’t help. I don’t understand this issue and can’t figure it out. I tried using only digits, or only text — same results. Any idea why this is happening? Mac Studio M2 Ultra OS Sequoia 15.5Camera Raw 17.3.1Bridge 15.0.4.534 Thank you,Shlomit

All of a sudden when Br is launched at Start-Up(Windows11)..before the entire screen loads, I am taken to the "Sign-In" screen for "My Account". Must login here before I see Bridge entire screen.Never had to do this..always went right to Br. I have the latest version and have a valid Pscc subscription. Is there an option that "logs member into account also available?Thanks!Dan  

Bridge Preferences only allow 6, 7, 8, 9 keyboard shortcuts. Purple has no shortcut, I have to right click on the image > Labels > select purple.This is time consuming, CAN I ALLOCATE A SHORTCUT TO PURPLE?

Bonjour,Si les aides sont seulement anglais, je ne vais par poursuivre...

Hi everyone I'm trying to do a batch rename of 200+ photos. They are currently named "FirstName LastName" and I'd like to flip the order so that I can do some processes with them organized alphabetically by Last Name.  I'd imagine there's a way to do this in Bridge but I'm not sure what the best way to go about it.  Thanks, Lou

I have my columns arranged how I like in my content tabs, but when I open a new tab it reverts to the default columns. I never rate or label anything so I don't need those columns and always delete them, and I like my size all the way to the right. Which means I have to delete and move my columns around every time I open a new tab which isn't realistic for a daily workflow. This happens when I click the hamburger menu for new tab, AND when I press the plus (+) button for a new tab, AND when I right click a folder and select open in new tab. I've tried deleting my workspace and setting up a new one, but that didn't work. I've unistalled and re-installed Bridge but that hasn't worked either. No matter what the columns revert to default. Has anyone found a solution to this? Can I set the default myself? Is this a bug or a feature? I'm running a MAC Studio. 

When I batch rename on my Mac it will not complete the task. I have to cancel it and what is left are files titled  "AdobeBridgeRenameTemp" then a number. As of this writing everything is the latest version.  Mac is Apple chip m3 max Sequoia 15.4.1. This should work. Please help or fix. Thanks Tom

MacOS 15.4.1 - Bridge Version 15.0.4.534 While viewing multiple images and rating  them I will use the down arrow to drop an image out of the view space in order to focus on remaining items. A rejected or dropped image will for some reason get stuck on the screen covering an image that is meant to be reviewed. I've attached an example of this image. 

这个bug在正式版和beta版都存在，且有一两个月了，我实在是不明白，这么明显的bug你们adobe为什么不修？ 出现的时机几乎是随机的，但通常在已经成功执行了一次“右键-移动到”命令之后，下一次“右键-移动到”会实际执行为“右键-复制到” 我的环境是win11，操作是本地磁盘文件移动到移动硬盘。这样的环境和操作是完全合理的吧？