Bug Reports

dynamic link is okay in AE, but shifted to the right 230 pixels. and these 230 pixels cut on the right side appear on the left side of the monitor.

Ever since someone at Adobe who knows nothing about video, computers, business, software, UI, UX or customers decided to ruin PPro's perfectly fine export workflow, "Generate Timecode" has not worked. I've reported this before, many months ago but maybe it got lost among the millions of other people's complaints about this abysmal export process that has been defecated upon us. To replicate the bug:Set an in-point and out-point somewhere (not at the start) of a sequence.Export that, setting Effects > Timcode Overlay to On, with Time Source set to "Generate Timecode", "Start at" set to 00:00:00:00 and Range to "Source In/Out".Do the export, and see that the timecode does not start at zero.

No video playback (however I can see the frame I'm starting on), only audio in Beta 22.6.0 Build 44. Tried multiple files in different formats. Okay in my non-beta 22.3.1.

I am using several FabFilter (newest release) vst plugins (Q3, C2, L2, DS) as I have used for many years and in the last few versions of PP I have seen issues arising. In the standard release of PP from 22.4 using this setup made the transcription fail to work. So I now have to run on version 22.3.1 for this very reason. I also have errors on rendering out timelines using these plugins. The renders (HEVC/ H.265) work, however I get PProheadless errors and other errors appearing once the render completes. I must say I have used FabFilter plugins (and Izotope RX9 and TC Electronics VSS4) for many years without issue.

Anyone else having a sluggish experience with update v 22.6? Ever since updating, I have notice a bit of a delay in selecting a clip in a project and previewing it, same in the timeline, and playback is delayed as well. I update to v 22.6 each day and it keeps happening. I revert back to v 22.5 and the issues disappear. 

This has been ongoing for quite some time. I have several screens, and the main UI is 2560x1080 in 100% scaling.   According to Windows, my reference monitor is "above" the UI screen. And it's a UHD monitor, so it's set to 200% scaling to get roughly equivalent type sizing.   In the Lumetri panel, hitting the "dropdown" list in the Basic tab works as expected, it ... drops down.   But in the Creative tab, the 'dropdown' LUT listing drops UP. Starts on the lower UI screen, but then goes up across the upper screen of the reference monitor ... but in a TINY and nearly unreadable font sizing.       Why does that drop-down drop UP? It happens with several other "dropdowns" also, and is nearly unusable. I have to get out of my chair and get close to the screen to read the blame things!   Neil

Playback of AVCi MXF material is very sluggish and causes the system to lock up for a number of sconds after only 20-30 second of playback.22.6.0. Beta build 31Monterey 12.3 / M1 Ultra 

I was hoping to use the beta but any time the playback is happening it gets blurry & pixelated.

Not possible to rename any items in a v22.6 project (in a production). e.g. make subsequence - can't rename, make new sequence - can't rename, pick another sequence - can't rename.  Workaround: rename them in the metadata window.  imac 5K Monterey. 

22.6.0. Beta Build 31 Essential GX messes up fonts when editing a title 1. Find an essenetial graphics title2. Place cursor mid-text3. Type to add text to current line RESULT:Text comes in in Minion Pro at 100 point - not the same font or size as existing. Expected Result:Font and size to be the same as the rest of the text in the line 

Selection tool activada, pero no puedo arrastrar. Ni dentro ni fuera del timeline. Ni siquiera reinstalando el programa. Version beta. Que puede ser?

I can't drag and drop from source to sequence (in premieire pro m1 beta version 22.6), despite trying all workarounds I could find online. System info: Hardware Overview:   Model Name: MacBook Air  Model Identifier: MacBookAir10,1  Chip: Apple M1  Total Number of Cores: 8 (4 performance and 4 efficiency)  Memory: 16 GB  System Firmware Version: 7459.121.3  OS Loader Version: 7459.121.3  Serial Number (system): FVFFG0AWQ6LX  Hardware UUID: 852EB106-4FA8-599F-BD59-27EEB0FE2DB3  Provisioning UDID: 00008103-0006706A36D9001E  Activation Lock Status: Enabled Rolling back to 15.1 works, this seems like a bug but if I'm being an idiot let me know! Mac OS is all up to date too.

Bug:Multiple sequences can't be sent to Media Encoder for export. How to recreate:1. Select multiple sequences in Premiere2. File/Export/Media3. Select an Export Preset4. Hit Send to Media Encoder.Result:Nothing appears in Media Encoder. Sending sequences individually works fine.

the scale number should be more in the middle and not on top of the reset button 

Cannot get the posterframes in the Project window/Preview Area to work. Wont stick. build 21

This is not new to the beta version as it has existed in several previous versions. After applying warp stablizer to the clip, and playing back the sqeuence at full resolution, it will show aligned to the left and up.  Stopping playback it snaps back to the right position.  Playing at half-resolution doesn't have the issue.  Also happening on another identical system. Mac Pro 2019OSX Version 11.6Tested in 22.6.0 beta, but also exists in other v22.x, v21.x, v20.x.

Did not have this problem in last Beta I installed (22.6.0.15?). This is the same as a bug that appears in 22.3.0.98 - except then, editing captions was affected. I do not see any problem with that this time.   Very similar to issues reported recently in the regualr forum on Release 22.4.0, but I do NOT have problems there.   Steps to reproduce:Transcribe. Transcription shows progress bar and gets to completion point. "Transcribing on device" message remains on screen. Result: UI is active. Closing and reopening Text Panel shows that completed transcription is present. Captions can be created.Expected: Transcription completes normally. System info    Application: Premiere Pro (Beta) v22.6.0.18    OS: Windows v10.0.19043, RAM: 63.80 GB GB, CPUs (logical): 16  

Opening of projects from productions takes ages, roughly about 3-6minPremiere beaves oddly,spinning beach ball for everything after opening, after some background loading is finished, then behaves normallyExporting via media encoder: exporting timelines in parts: Media Encoder sets IN/OUT for every part to the same values, even if you beforehand determined other IN/OUT points!!!METADATA  Burn in:  would be a major advantage ifthis could be a effect ou only need to appl once and then choose how many different lines/items you need. Also for big productions it would be a HUGE timesaver if thecan be implemented into Media Encoder/Export: Meaning on export you can choose the setting and even make this available for proxy workflow

I'm on PPro 22.6.0x7 (Beta) and this morning I can't rename items in the Project Panel. I click on it and wait until the name becomes highlighted (as usual), type the new name, hit enter, then the name just reverts back to its previous one. I've tried right-clicking it and choosing Rename too, but exactly the same happens. I tried quitting and relaunching PPro, but it didn't help. I'll have to go back to the public release version for now.

I tried to rename sequences and bins, and it just goes back to what it was called before I tried to rename it. System info    Application: Premiere Pro (Beta) v22.6.0.6    OS: macOS v12.3.1, RAM: 64.00 GB GB, CPUs (logical): 10

Seems to be when I am trimming. Happens several times a day. Spinning beach ball, force quit is only way out. Running on Monterrey, most source is AVCI MXF from Sony cameras.  Updated from v22.4 to fix the shuttling bug (which it has done) and the flickering/disappering waveforms (which it has not). Going back to v22.4, considering v22.3.

Created a new bin, but I can't rename any sequence or bin. It just goes back to it's default name. Difficut to organize the project folder.

1st act exported fine via AME on v22.5 2nd act had full frame green flashes with same settings (basically Vimeo 720HD with timecode burn). Disabling use previews did not help. Exporting from PP direct was fine.

Running v22.5 beta (build 49 I think).Opened v22.4 sequence (in a production) + hit render all.  Watched back + one file is media offline. Hmmm. Bit annoying I wasn't warned/prompted. Found clip, went to relink, it found file but reported that it wasn't compatible. This is a screener so it's MP4 plus it has (bracket symbols) in the name. Converted to prores proxy in shutter encoder + it relinked fine.  This isn't the only MP4 in the project (lots of A7s C000x.mp4) mind. But there's something about it v22.5 doesn't like that v22.4 was fine with.

Today, I've found that scene/edit detection usually does not work at all, even on some very conventional clips, with obvious cuts. I've had the problem on both the release version of PPro and 22.5.0x42 Beta. Quitting and relaunching PPro cures the problem.