Camera Raw

So this is a multi tiered problem. Shot some aurora pics the other night. First time I used a Rokinon 20mm f1.8. This doesn't look as if there's a correction file in existence for it. When I opened the files in Lightroom they were blurred, almost foggy looking. When I open the files in Camera Raw the focus appeared fine. That brings me to the second issue. When I use raw and it either comes time to save n export or to open in photoshop, it almost always stick me these swirls marks all over the image. I can not even get people to agree on what they are called much less how to stop them, I also get this affect when saving in photoshop or anytime I flatten an image in photoshop. I'm reduced to zooming to full screen and taking a screen shot before saving or flattening, then pasting it in paint and trimming off any thing that not my picture if I want my finished product to look remotely acceptable. I would just stick with Lightroom if it let me save in any format but it just seems to let m

Camera RAW is not working properly since update to Catalina. Any updates soon?

I have ACR 12.1. I'm noticing that when you view a raw image in ACR, it looks heavily sharpened - even though all the sharpening sliders are set to zero. As I have sharpening set to preview only, the image looks normal when exported to PS. Anything you can suggest to rectify this?

Hi,I posted a similar question in the Adobe AE forums 6 months ago without any luck.I am trying to use the maximum out of my cinemaDNG files from My DJI Inspire 2 super 35mm X7 camera without any good results. I have found one way that works without shadow flickering but that means using the process 2010 (v2) engine in camera RAW and that one is nowhere near as good as the 2012 (v3) or latest one (v4). I've been told that this works for time-lapse photographers batch processing in Lightroom (have not tried yet). That makes me confused since I've been told that ACR & Lightroom uses exactly the same process engine? Anyone with any ideas? kind regards // Alex

Specific case: Select 1 file and set Texture value to -30 (type or use slider) & press enter to keep; select all or several files (specific case, select 29 files). Texture window changes to empty box (indicating multiple values); type "-30" in box. Must reply/press OK 29 times (I think... by then they all run together). If you set value with slider instead of typing, works OK. 

I gone crazy while i have updated my Photoshop and realize that the new Camera Raw opens each raw serately and not together like before!The function that i have the Browser on the left, where i can edit all together or transfer the settings is gone!This function is for me existentially, while i have tons of pics that have nearly the same settings.Edit each separately was a horror for me!!What can i do and when not, where do i geht the old Camera Raw?Thanks and regardsGuido

In ACR, underneath the image, there is a hyperlink to workflow options and in that window you can check or un-check "resize to fit" and also you can check/uncheck "don't enlarge"I've also read that you can use the crop tool but I don't see how to do thatI'm using the latest version (12) via the cc subscriptionthanks

I have a Canon EOS R. In Lightroom I have camera profiles (Camera Neutral, Camera Landscape, Camera Faithful, etc.)  Up until recently when I chose one of these profiles for an image then opened it into photoshop it rendered the profile correctly.  Today I opened an image from a Canon EOS R in Lightroom, chose the Camera Landscape v2 profile, made some adjustments then opened it directly into photoshop.  The image was very washed out.  After doing some sleuthing I opened the image from the raw .CR3 file directly into Photoshop using Camera Raw.  At the profile I had a yellow alert triangle, when I moused over it the tooltip read "Profile not installed, rendering is incorrect".   How can I have a profile installed in Lightroom and not in camera raw?  And why suddenly has it disappeared.  If I "bake" the file to DNG it looks correct, and certainly, I can get my "pop" back in PS but it's a lot more work that I really should not have to do.&nbsp

I created a radial adjustment in Adobe Camera Raw. I selected the brush tool to modify the area impacted by the adjustment. This has worked in the past. However this time, the add to selection brush did NOT operate properly, and it has not since. The add to brush seems to apply in an ABSOLUTE LEVEL. So, where ever the add to the radial adjustment brush is applied, the local adjustment goes to some uniform level. What used to happen is that where ever the add to brush was applied, the adjustment would increase up to a 100% of what ever the radial adjustment was (gradually or immediately depending on the flow setting of the add to adjustment brush). My guess is that I inadvertently hit some setting shortcut. HELP! Other info:-- The add to the radial adjustment brush seems to work fine when used outside the area impacted by the radial adjustment.-- The erase/subtract from the area impacted by the radial adjustment seems to work fine. -- The same issue occurs when trying to use t

I'm running CS4 on OS10.6.8 (yeah, very old. So am I.) Until now, 5.4 has recognized my Leica SL dngs. No longer. It still recognizes my older Leica M240 dngs. What can I do to get the SL dngs recognized again? Any guidance appreciated. Stan

With the specified configuration, Fuji X Pro 3 Raw files do not open. Can you do anything? Thank you 

Hello,All of the sudden my Camera RAW doesn't recognises my Canon Lenses.The only thing is that I uninstalled (via the uninstal program) al the older versions of Adobe CC. But the disapearence of only Canon lens profiles doesn't seem logic...e.g. Nikon is still there... Does anyone know what the problem could be?Updates are all done etc. Greets Joris

Does anyone know of photo editor on the Android OS that can handle psd templates with multi layers?

I am updating from elements 9 to elements 2020 to accomodate my new Nikon D750, ( I was shooting with a D60). Do I need to remove elements 9 before I install 2020?

Hi, I am owner of Elements 15, which I've had for about a year and I am now confronted with a problem where basically.... if its not sorted.... I can throw away Elements 15. I have even spoken to the Adobe Hotline and they can't even help. So they suggested I contacted you cracks. I have the following problem.I recently bought a new Camera, and although I use it mostly for filming... I also intend to photograph quite a lot with it- I bought the Panasonic FZ200, or as it is known in America the FZ2500. I was most disappointed, when trying to load RW files into Photoshop elements using the installed Camera RAW Version 9.7.0.668... that it refused and told me to download a newer version of Camera RAW. After fighting my way through Adobe online pages which just seemed to go round in circles, I took it into my own hands and downloaded 11.1..... which installed correctly...... but didn't work. In Elements there is still only 9.8 installed. It would appear that I need ATLEST 9.8, which is not

I use LR 4.  I have upgraded my camera to a D7500 which uses a newer version of RAW which LR4 does not read and Adobe don't seem to support the products they have sold in the past which seems a little off to say the least. Furthermore, the options of forums only being LRcc is sad and not expected from a industry leader. however, I have down loaded the Adobe RAW converter but the quality produced is poor 1024 x 643, but still retaining the 20 meg file size.  there doe snot appear to be a selective option to chose a higher resolution.  please advise a solution.  regards  alan

In camera raw, using the Graduated Filter, I trace an area from 10 inches below the top of the document down to the midle of it.  When I adjust that area (for instance decreasing the exposure slider) the change of exposure starts at the top of the document instead of just inside the green line. How can I get it to start the change inside the green area, feathering to zero at the red line?

My camera raw, photoshop and bridge are all  up to date, when I open file(s) in bridge to camera raw, they show up corrupt.  Does anyone know the reason for this? 

Since I've upgraded to v2020 the RAW processor (Camera RAW) is very slow.  It takes a long time to load, then when I make an adjucement it takes about10-15 seconds for it to take effect.  Anybody know what the problem is?

Hi there,I am scanning old diapositives using the following setup (on Windows 10 - 64 bit):Scanner: Nikon Super Coolscan 5000Scanning Software: SilverFast 8.8Editing: Adobe Photoshop Camera Raw (Version 12.0.0.322)I am scaning to a raw ".DNG" format. The problem is that out of a hundred scanned files, Camera Raw loads 95 or so perfectly, but the remaining five a rejected with the message that the files are "not of the right type". All files are created with exactly the same settings on exactly the same hardware. SilverFast HDR can open all 100 files the same, no issues.How can I fix this? Any help will be appreciated. 

I am trying to install brushes into acr.  However, there is no folder in camera raw called local setting.   My only three options are settings, camera profiles and lens profiles. So where do I put my brush files if this folder doesn't exist?

I recently bought the new Canon 5D Mark IV, since purchasing this camera I have tried to upload my raw files into lightroom and they will not recognize them.. It only recognizes the JPeg's.. I thought maybe it was because I had an older version of lightoom, so I upgraded to Creative Cloud, and I am still having this issue... Please tell me how to fix this,as I have a deadline approaching.. Thanks so much, Cassie

I use to be able to double click on the "white" or "black" setting in Camera Raw to set the best setting, similiar to what you can do in Lightroom.  During one of the recent update, this it has stopped working.  Has anyone else seen this and is there a setting to get this back to working?

Hi everyone. I updated my OS yesterday to macOS High Sierra Version 10.13.6 and my Scrubby Zoom for Camera Raw is greyed and stopped working. (althouth, in Photoshop is working well). I have started my photoshop many times already, checked Preferences Performance but nothing works. Any idea of what is happening? 

I would like to arrange the CameraRAW film strip by time.Is it possible?