Camera Raw

My camera raw, photoshop and bridge are all  up to date, when I open file(s) in bridge to camera raw, they show up corrupt.  Does anyone know the reason for this? 

Since I've upgraded to v2020 the RAW processor (Camera RAW) is very slow.  It takes a long time to load, then when I make an adjucement it takes about10-15 seconds for it to take effect.  Anybody know what the problem is?

Hi there,I am scanning old diapositives using the following setup (on Windows 10 - 64 bit):Scanner: Nikon Super Coolscan 5000Scanning Software: SilverFast 8.8Editing: Adobe Photoshop Camera Raw (Version 12.0.0.322)I am scaning to a raw ".DNG" format. The problem is that out of a hundred scanned files, Camera Raw loads 95 or so perfectly, but the remaining five a rejected with the message that the files are "not of the right type". All files are created with exactly the same settings on exactly the same hardware. SilverFast HDR can open all 100 files the same, no issues.How can I fix this? Any help will be appreciated. 

I am trying to install brushes into acr.  However, there is no folder in camera raw called local setting.   My only three options are settings, camera profiles and lens profiles. So where do I put my brush files if this folder doesn't exist?

I recently bought the new Canon 5D Mark IV, since purchasing this camera I have tried to upload my raw files into lightroom and they will not recognize them.. It only recognizes the JPeg's.. I thought maybe it was because I had an older version of lightoom, so I upgraded to Creative Cloud, and I am still having this issue... Please tell me how to fix this,as I have a deadline approaching.. Thanks so much, Cassie

I use to be able to double click on the "white" or "black" setting in Camera Raw to set the best setting, similiar to what you can do in Lightroom.  During one of the recent update, this it has stopped working.  Has anyone else seen this and is there a setting to get this back to working?

Hi everyone. I updated my OS yesterday to macOS High Sierra Version 10.13.6 and my Scrubby Zoom for Camera Raw is greyed and stopped working. (althouth, in Photoshop is working well). I have started my photoshop many times already, checked Preferences Performance but nothing works. Any idea of what is happening? 

I would like to arrange the CameraRAW film strip by time.Is it possible? 

I have Photoshop CS6 and a Canon PwerShot SX60 HS but CS6 won't recognise the camera's RAW files. I read I need version 7.1 but that's not on the Adobe Camera RAW Plugin Installer download page. None of the versions on this page works.I did use DNG but the resulting TIFF files are more grainy than the JPEG!Can someone give me a link to the correct version? Thank you.

I have just purchased a Canon 90D. I use Elements 14 to process my images which was fine when using my Canon 7D. Now Elements 14 doesn't recognise my RAW and CR3 files. Do I know have ti upgrade my software to enable me to process my images?     {Thread title edited by moderator}

I have the latest version of Windows 10 64 bit and Photoshop Elements 9 (a little old I know).  I just got a Canon 5D mk iv and found that PSE 9 wont open the CR2 files from this camera.  In my haste to get things going I downloaded and installed Adobe Camera Raw 12.1.  The install completed in a few minutes with no error but did not solve the problem.  I now have learned that PSE 9 is not compatible with ACR 12.1 so I'm a little mystified as to why ACR installed without error.  The computer appears to be working fine after the installation of Adobe Camera Raw 12.1 in spite of the stated lack of compatibility (see: https://helpx.adobe.com/camera-raw/kb/camera-raw-compatible-applications.html).  I'm wondering if I should just leave things as they are since all seems to be working or if I should take some steps to avoid any troubles going forwards.  I probably will update to the latest version of Elements to solve the problem but in the meantime I'

Hi  Since camera raw 12.0 update  when I go into adjustment brush and want to create a new pin and select mask all is masked and then it remove the mask when I draw is there a way to switch it back again so it mask what I draw and not turn everything red and then erase the mask    {Thread renamed by moderator}

I'm in Photoshop and if i want to auto on Camera Raw i have to open the Camera Raw then i have to click "auto" and then i have to click OK. Is there a shorter way to do this ?

I have a newly installed current version of Photoshop on my Mac running current OSMy problem is, that every time I open a picture in Camera Raw, I cannot seem to change the 'Radial Filter' settings to only change the inside of the circle/filter1) Chose radial filter -> creating a circle -> changing effect from outside to inside -> no change, all changes happen outside the circle2) Chose radial filter -> clicking 'inside circle' -> The moment I create a circle, it jumps to outside, and it doesn't change when I try to change to insideCan someone please help me out, thanks

For some time the user presets i have bought and installed are not available for jpegs opened in camera raw. They are available from the user presets list for nef (raw) files but not for jpegs and it never been like that. I used to open jpegs in camera raw and edit with user presets without problems and now they are gone. How can i get them back for jpegs on the user presetes list ?

Hi,I am trying to use the 11.2 DNG converter CLI on MAC Mojave 10.14.1 without any luck. I have followed the "Command Line Support" document for reference, but I can not seem to get it to work using the reference example. I am using the following command:"open -a /Applications/Adobe\ DNG\ Converter.app/Contents/MacOS/Adobe\ DNG\ Converter --args -c -e -p1 -cr7.1 -dng1.4 /path/filename.NEF"The DNG application seems to start as the icon appears in the bottom of the screen, but it quickly closes again. Maybe this is an indication of DNG converter not finding any files to convert? Appreciate any help on this!

god these new 'features' are frustrating... i'm working on a freelance job and i'm desperate to find preferences, i don't see the tab anywhere! please help! under a deadline!

ACR shows white balance measurment with lower tempatures representing colder or bluish tones and the higher tempatures representing warmer tempatures/tones. However other measurement scales of WB tempatures show the opposite with lower tempatures representing warmer tones and higher tempatures representing colder or bluish tomes. Which is correct and why is ACR opposite to the other measurements?

If anyone can help, would be greatly appreciated. I follow the path to app data in camera raw and there is no folder to place presets.  I try from in the app, and also starting from local disk. What it looks like is my computer doesnt even have camera raw installed, yet it opens from either bridge or photoshop.  Thanks

This is the second time this has happened in recent history. No profile corrections available for my .NEF files or .DNG files. Yes they are RAW files, Nikon and DJI. I was working on this project last night with no issues, resumed this morning and the lens profiles are gone. They are still present in Lightroom, however my work flow depends heavily on processing photos in Adobe Camera Raw. The last time I had this issue it was resolved after a very lenghty phone call (mostly on hold with with Adobe Support) and I just dont have time for that. I did not do any updates that I know of to my Adobe products over night., Any suggestions? 

Just updated to photoshop cc 2020, camera raw updated to 12.1. I went to use it and there is only 1 color profile, adobe standard, and there is an warning sign. How do i get the color profiles back.   [Duplicate thread. See: https://community.adobe.com/t5/camera-raw/where-did-preferences-go/td-p/10815081]  

Bonjour a la communoté Qui pourait me dire pourquoi Camera Raw passe tout seul du francais en anglais? Et comment faire pour que cela ne ce reproduise plus ? Merci a vous toutes et tous

How can you tell when Sync Settings is finished? I take overnight time lapse images of the night sky and process up to 3,000 images at the same time.  I cannot tell when the Sync Settings function has complted.  I wnat to know when I can move forward with my processing but have no way of knowing when the task is done.