FrameMaker

If I open a new, blank FM document to create a test file, it saves a PDF. But if I open a specific, previously created doc and make changes, I get the warning box. If I look in the folder where the ".tps" file is supposed to be, it is not there. (I assume the ".tps" file is a Temperary PostScript file that distiller uses to make the PDF?) This sounds like a corrupt file, so I got a new copy from the archives and tried again; no luck. I have tried "print to PDF" using the Adobe printer, no luck (same warning box).

Windows 10 Lenovo 64.TCS 2017Started creating new instructions using FrameMaker. Our default company font is Arial. FrameMaker's default font is Calibri. Created new xml files with Arial and saved. When opening once again, I get this:The "Zapfdingbats" Font Family is not available.  "Adobe Pi Std" will be used in this session.The "Courier" Font is not available.  "Courier New" will be used in this session.The "Zapfdingbats Regular" Font is not available.  "AdobePiStd" will be used in this session.How to fix it? Under a deadline. Started creating docs in Word (argh!) just in case.Any help in resolving this issue is greatly appreciated.

I use Bentley's OpenRoads Designer software as well as FrameMaker 2017.  These two seem to be stomping on each other's dll files.  The most likely suspect is TBB.dll.Symptoms of the problem are that one program will run fine, until I start the other program.  Then the first program fails with an error that the dll is invalid.  I reinstall the broken program only to find that the first one is now broken.I really don't care whose fault it is but does anyone have a fix?

Hi,Is there away to make structure view pods always on when I open new document. I'm using Framemaker 2017.Thanks,PCO

Adobe FrameMaker locks up and needs to have its process ended in Task Manager after selecting to view Object Properties the third time in a session. Windows 7 Enterprise SP1. When it locks up, the document you are working on distorts (see image). After terminating the process, I of course have to Reset Lock and Open to get the docs I was working on open again. In practice, this means that I have to remember how many times I've already right-clicked on something and viewed or edited Object Properties, and close out and go back in to avoid crashing. This really renders the Object Properties feature problematic, as it is a very common feature to edit.

I built symbol references that go into a table in my body pages, but only one of my symbols does not show up in the table:Table in the Body Pages:In addition, when I create a new row to see if it will add the symbol, it creates a new row with the content from the previous row:Any ACP out there know the issue?  I am novice to moderate-experienced user of Framemaker, so I'm learning.Thanks!

I need to insert a variable into a mailto hyperlink in a PDF doc. Static text is easy...message URL mailto:<email address>?subject=Feedback for pageClicking this in the PDF will launch the mail client with the subject of "Feedback for page" in the subject line. But I really need it to automatically populate with the current page number as well. So, I guess it's a dynamic link? Here's what I want to do but I can't get it to work....message URL mailto:<email address>?subject=Feedback for page&<$curpagenum>I've tried it witht he brackets removed and without the dollar sign. Both times the variable is just ignored. Anyone done this? Thoughts? Is this even possible?

I see that I can define an XSL processor to run my pre/post processing stylesheet in the structapps.fm.The FrameMaker 12.0 developer reference offers XALAN or SAXON as options (page 26). Meanwhile the FrameMaker (2017) developer's guide says that FrameMaker supports XSL version 1.0 (page 427).If I need XSL 2.0 functionality, and I have Saxon in my environment, will this functionality be supported?ThanksT

FM2017 does not create WebHelp and I need WebHelp files. When I tried opening the files in FM12, it wouldn't let me.What are my options?TIA

I cannot Save to PDF or print PDF when running FrameMaker 2017 in Parallels for Mac. I'm guessing I have a setup problem. I can print and save to PDF just fine with these same files and same FrameMaker 2017 installed on my PC.Whenever I try to Save to PDF or print to PDF, FrameMaker becomes unresponsive (with not responsive message) almost immediately and never recovers from that condition. I have to force quit the application. I can work in the files in Mac (Parallels), save, etc. All functions work. I just cannot print.I switched to Mac (MacBook Pro Mid-2015 running OS 10.12 Sierra) with new job/role about a year ago and I work almost exclusively on the Mac now. All output from FrameMaker is PDF/electronic. I just have to switch over to the PC to save to PDF or print to PDF. All files are sync'd by Dropbox between the machines, so I know it is not the files. They print fine from the PC. I believe the setups are identical, but I'm obviously missing something with the Parallels setup.

Hi. I am trying to download the trial version of Adobe FrameMaker (2015 release) and all I get after download is a installer for Akamai NetSession Interface.Can someone post a URL to the FrameMaker download instead of the Akamai Netsession Interface?

Kann es sein, dass in einem Dokument eine Absatzformat gesperrt sein kann gegen Veränderung? Folgendes Problem:Ich habe eine neue Tabulatorposition im Absatzformat definiert.Fenster blinkt kurz mit der neuen Position, Position verschwindet dann.Absatzformat kennt die neue Position nicht.Um das Vorgehen zu überprüfen habe ich die Schritte zur Erstellung einer neuen Tabulatorposition in einem anderen ganz neu erzeugtem leerem Dokument durchgeführt. Ergebnis: Es funktioniert, Absatzformat konnte geändert werden.Daher die Frage, ob eventuell in einem Dokument das Verändern von Formaten gesperrt werden kann?

This link does not work from the Adobe FrameMaker page.FrameMaker Bug Reports & Feature RequestsFirst, please do check the forums to ensure that it's not a known issue.To report a bug, request a feature or vote on these, please use this link to the new bugbase:Adobe TrackerAlso, the link for the bugbase does not work either!To check the status of previous bugs or wishlist items, check the old bugbase [now read-only]:https://bugbase.adobe.com/

How do I prevent Frame from crashing when I'm using the scrolling method to select a large chunk of text for a copy/pastedeletion

%[ Error: syntaxerror; OffendingCommand: ) ]%%%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%%%[ Warning: PostScript error. No PDF file produced. ]

I followed instructions from another thread to import elements from my EDD to a template, but it didn't work. Only one of the elements from the EDD shows up.I opened both the template and the EDD, then used File > Import > Element Definitions to bring the element definitions into the template file.The "chapter" element is the only element I see.I'm using FrameMaker 10. Not sure what I'm missing in this process.

Hi.I used Adobe Creative Cloud Packager to create an installation for deployment (SCCM) on Windows 10 x64. However, it fails to install. It looks like most of the files are getting installed into the installation folder, but then an error occurs, and the install rolls back.The error message in PDApp.log:09/14/17 10:11:48:087 | [FATAL] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2276 | The return code from the Adobe Installer Process is (7).Stopping the installation process.09/14/17 10:11:48:087 | [ERROR] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2276 | Media Failed (FM14.0)I've downloaded the media multiple times, choosing both x64 & 32 bit, modifying download options (leaving all as default), but no joy.The computer I use to test has Adobe Reader 17.09.20044 installed, but no other Adobe products.I've searched but not found any answer to my problem - the error message is hardly helpful

I'm an editor of an industry journal, and got corrections back from an author. He wanted the numbering of footnotes changed. I've attached a screenshot below; he wants the "17" changed to a "15" but I'm not sure how to do that. I'm hoping I can do this and the numbering is automatically changed for all subsequent footnotes.By the way, I work primarily in Word, so appreciate any FM help. Thanks!--Andy

Hi all,As mentioned, I am fairly new to the structured FM. I  have a table in my content. The table was formatted correctly; however, when I apply the structure to my document, I am getting the following error. Please see the attached image. What should be fixed here and how to go about fixing it. If anyone can walk me through fixing the error, I'd highly appreciate it.

Has anyone else experienced constant crashes with the following errors?Windows 10 Enterprise, 64 bit32 GB RAMFrameMaker 2017 (14.0.2.435) patched up to rev -02Fresh installUpon launch, the console window appears with the message: FV_BadFileNameFrameMaker crashes with console error:maker: While reading menu customization file C:\Program Files (x86)\Adobe\Adobe FrameMaker 2017\fminit\configui\ClientCmdDesc.cfg. maker: (408) Cannon remove menu item name PDFSizeOptions from the menu named PDFSizeMenu. PDFSizeOptions is no on the PDFSizeMenu menu.I've deleted AppData prefs, but no impact. I've removed the offending PDF lines from ClientCmdDesc.cfg, but no impact. The problem appeared before updating to rev-01 and rev-02. I was hoping that the updates would solve it, but no impact.Adobe, any help?Thanks,-Brian

Using Framemaker 2017 - can you active a Character Tag upon "X" like you can with nested styles in InDesign?

Can anyone tell me why one of my team members is getting this error. (Internal Error 14004, 14470178, 17032391, 17028791.  FrameMaker detected a serious problem and must quit.  This is after saving the file book.  Also, this is an older file we're working with, which FrameMaker 2017 should still work with older files.ThanksKerry

FM is crashing when I am population a list of items in a scrolling list display. I think it is due to the number of items, around 1000 or more lines and it crashes, otherwise it works fine.Is there a hard limit on the number of items displayed? Can it be overridden or is there an alternative similar display method?

Hi all,I recently started using the Structured FrameMaker. One thing that has been confusing is that how do I address/resolve the messages that EDD file log shows. What am I doing wrong and how should I go about fixing the issues. Any help, tips, or suggestions are highly appreciated. Thanks,Ahsan

I have a document that was initially on version 7 and am now working in 2017.  I need to modify all of the TASK and Subtasks in the document from exp. "TASK 20-07-00-99F-873-A" to "TASK V20-07-00-99F-873-A" and also modify xref tags the same way.  In Version 7 it would allow me to just modify the TASK text but now I am not able to highlight or modify the TASK.For the xref it allows me to highlight but I cannot make any changes. Below is an example of what I am working on:If I attempt to select the TASK it highlights the whole TASK document: