Fresco

FRESCO: How can I tranfer a picture from the sart (Startseite) to folders in "your work" (Ihre Arbeit)?

I've seen a couple of articles that refer to tracing an image in fresco.  The problem is none of them say exactly how to do it.Is there a link where I can learn the process.

Since Announcing about removing Sketch app and you encourages Sketch user to use Fresco, What is the plan for Android user then??? Isn't there only iOS version of Fresco yet??? Any plan for Android users?    

Is there a workaround for this or when is this going to be available with my graphics card? AMD Radeon R5 340x  I've tried uninstalling, reinstalling, restarting, etc. It appeared from the information available that this newest update should be compatible, yet it says it is not? Sarah 

I really really like Fresco. The brush tools are great, the interface is clean and easy to follow, and the integration with Photoshop via the cloud is fantastic. I'm using it exclusively on an iPad, and I think the strategy of breaking the painting tools out of Photoshop into a separate app makes a lot of sense for a tablet. But as much as I want to love this program, I regularly find myself wanting to fling my iPad across the room becuase Fresco's terrible palm rejection makes the application almost unusable. Probably every third or fourth time I place my hand on the tablet to start drawing, Fresco executes at least one Undo, and sometimes three or four. If those happen very quickly as you're putting your pen to the surface, it's very easy to have started a new stroke before you realizes that Fresco has just deleted your last three, and then at that point it's too late to hit the Redo button to get them back. In addition to having to repaint untold numbers of strokes becuase Fres

HiI must have missed something, but I can't figure out how to transform a single vector object, and not the whole layer?? I don't want to draw a selection a around the object, because I'll end up with other close objects in the select. I just want to select one part of a vector layer, and transform/move that. Is that really not possible??

Hello. I have a problem with Adobe Fresco. After starting and creating a new document, the work area where I can draw is black. I can only see the effects of the work on the thumbnail. Other programs, such as Photoshop or Illuminator, work fine. The work area is white and the effects of work can be seen on the fly. I followed the instructions and reinstalled the program. Did not help. I used Adobe Cleaner tooll tools, same effect. The operating system is up-to-date, the drivers for the graphics card are up-to-date. Meets the hardware requirements. Do you have any solution? 

Hola! tengo instalado el progama correctamente. pero cuando esta iniciando se cierra automaticamente sin marcar ninugun error. mi tarjeta grafica es una AMD Radeon 330.me pueden ayudar?

Hello, To get some documents from another account, I logged off from my Adobe account in my iPad Pro 2021.When I logged in again, I find out that my favourite brushes and followed brushes are gone.I tried to re enter the account but it seems that favourite brushes are deleted each time I entered my account. How can I fix this? best 

Hi everyone,after the latest update of fresco, it seems my mixer brushes are not working anymore.I don't think there is any setting I need to tweak, but if there is please let me know.After tracing a lot of "invisible strokes" yesterday fresco crashed too (I sent the report to adobe already)Please let me know what I can do!Check the attached video to see what's happening.Thank you

Hi, I don´ t fully understand to logic of Fresco with vector images.Could someone , please, explain me the basics. I need to do vector image. I have done everything with vector pencil and got one logo from client with rgb features. And now when I´m saving it, it seems to that everything else is scaling very well but logo isn´ t.How is it possible to have vector and pixels in same image. And how to do it so everything is vector????GreetingsMari

I love the watercolor brushes but they always freeze my screen, I have to restart the program and the file gets corrupted.   When using the brush, it will either freeze my screen or I get a pink glitchy area, and freezes the program and I have to restart. If I close the file and reopen, it is all pink entirely and frozen.  Restarting the program alleviates the freeze but the file is corrupt.  Any ideas? 

Not sure if this is the best place to report bugs but I've notcied that when I import vectors into illustrator that I have used the trim feature with in fresco, they often have traces of the trimmed shape left behind. Not a huge deal, but just a bit tiresome to go and delete since they are noticable in print. Attached a photo of what I see in the imported file in illustrator. 

When I select the brush and to paint using the brush and Apple Pencil 2; I don't see any mark on the screen. while if I just use my finders it works fine. This only happens for the oil / water colour brushes and the other pixel brushes works fine

I had a couple years' worth of work saved on my iPad on Adobe Fresco. I used it this afternoon with no issues and then picked it up again a few hours later to find that I was signed out (I did not sign myself out), all of my files were missing and all of my saved sizes were gone. I have only a few exported projects saved on the iCloud and thought that all of the Fresco files were backed up on the Adobe Creative Cloud but they aren't there. Is there any way to recover them? I lost several illustrations and designs that I need and haven't been able to find a solution on the forums.

I am using Adobe Fresco On my iPad. I find the brush used in test area of stylus pressure is quite good. However, I cannot find similar brush in terms of sensitivity to pressure and how does it handle the tips of my drawing. It seems that all other brushes "smooth" out by default even if the "smooth" setting is set to 1. Which brush is the most similar to the brush used in test area of stylus pressure?

Using the circle shape tool and filling with vector creates sloppy edge work, which is unacceptable for vector art. The particular image attached is of an attempted oval, but even with an undistorted circle, the same issue is present. I did not post this to UserVoice, since it does not have an option to post/comment images of the issue.

Hi all,I love Fresco and am in the middle of using it to create assets for an animation project. I opened it up today to discover that the last brush I was using (the stock "Chunky brush" found in the painting section of the pixel brushes) would not draw with my apple pencil, but it would with my finger. I am using an iPad (7th generation) on ios 14.6 with a first gen apple pencil on firmware version 2.61 (which I understand to be the latest) and updated to the latest version of Fresco. I deleted and reinstalled Fresco but that did nothing. After experimenting, I found the apple pencil worked fine with the pencil and pen brushes from the "sketching" section as well as a handful of other random pixel brushes but most will not work with it and instead will only show up when I use my finger. Has anyone else experienced this? I only found one other post related to this phenomenon, but they said it solved itself when they updated ios? I really need to get this working asap, any help would b

I can't open my documents anymore because the app says I need 1,1 GB.I have almost 5Gb on my iPad. How can I fix this problem? 

I was testing out the "View Version History" feature in Adobe Fresco (also available in some other apps as well that use Cloud Documents), and I can see the list of time stamps of the autosaved versions (roughly every 15 minutes) of a Fresco drawing I was working on last night. This is great to know I can revert to previous version that go way beyond the undo levels available while working within Fresco, but this issuse is I can't actually see a visual preview of any of these previous versions, which would make it difficult to select the right one to revert to if ever needed! This issue is the same from within the Fresco app and on the web. It looks like previewing previous versions should be possible in Fresco as stated on this help page: https://helpx.adobe.com/creative-cloud/help/versioning-faq.html

I really like Kyle's watercolor brush. However, it is traditional pixel brush rather than live brush. Is it possible to convert a pixel brush to live brush?

I came across a Fresco tutorial which showed the App's text function. I have updated my own Fresco app on my Surface Pro 7, but I still cant see this function.  Is the text function only available on the Ipad app or do I need to activate it somehow? Thanks!

Here’s all that’s new and exciting in the June update:    SUMMER 2021 BRUSHES: Paint lush vegetation, soft grassy fields, shifting hues, and more strokes of summer with Kyle T. Webster's latest brush set.          EYEDROPPER GESTURE SETTING: If you love the Eyedropper but not the gesture that launches it, we've got good news: You can now adjust it.  In-App Settings, select Input > Touch > Long press for eyedropper.         TEXT SUPPORT ON IPHONE: You can now adjust the size, leading, and tracking for thousands of Adobe Font typefaces accessible on the iPhone.  Feel free to check out the feature in detail here.        See What's New for more information on the latest features. To help us have focused discussions, create separate posts for feedback on features related to this update. 

I was curious if there is a actual way to centre text to background on fresco

TENGO UNA WACOM ONE, TENGO LAPIZ DIGITAL PERO NO ES TACTIL, POR LO QUE NO PUIEDO REDUCIR O AUMENTAR EL TAMAÑO CON DOS DEDOS EN ALGUN LUGAR ESPECÍFICO DE MI DIBUJO.- POR FAVOR NECESITO AYUDA