Lightroom Classic

Assez souvent, notamment lorsque je me sers des masque avec ligthroom classic,  il y a un blocage du pointeur de la souris et bien sur de l'ensemble de ligthroom classic. Cela ne le fait pas à chaque fois, mais si je traite trois ou quatre photos, il y a toujours un moment où cela le fait. J'ai essayé plusieurs fois d'e désinstaller et réinstaller litghroom, mais rien n'y fait. au bout d'un moment ligthroom redémarre mais il plante peu de temps après Merci d'avance pour votre aide

MAC OS 10Lightroom 2015.4 releaseSteps taken: Open develop, click on crop, unlock padlock, select ratio of 2x3 (then padlock automatically closes), drag / move crop area - then ratio switches straight back to "Original".   Printing photos at the "Original" ration leads to unwanted cropping of the prints.How can I set the default ratio for all of my prints to be 2x3? If that is not possible, how to I lock it on each one?[Moved from the Forum comments forum (which is for issues with these forums themselves) and into a product-specific support forum - moderator]

can we please come up with an alternative setting adjustment other than sliders? sliders I go back-and-forth over the exact setting I want back-and-forth back-and-forth back-and-forth 1000 times if I could just hit the up and down key to put a numeric value in I could precisely do what I wanna do in a fraction of the time sliders are not precise and stupid I'm going back-and-forth trying to set it to zero or zoom into 100% and I'm at 98.9 102.5 I want 100 why can't this thing figure out the number I wanna go to if I could type it in but no. when you click the slider it doesn't highlight the number box you have to go there and do that separately when you click the slider the number box should be highlighted and when I type it should type in the number and when I touch the arrow keys it should've just only that slider.  who wants to switch between pictures when you're in the develop mode what the duck!(I guess this is geared towards kindergarten children.)  I don't even underst

I have been trying to select 3 different images to create a hdr merged image but after selecting the three images with varying exposure levels, and selecting hdr, I keep recieving this message. How can I bypass this error? Thank you!!

Hallo, Ich habe meine LR6 Lizenz vergessen zu deaktivieren und möchte es nun auf den neuen PC installieren, dann kommt jedoch der Fehler, dass die Seriennummer zu oft verwendet wurde.    Adobe Support sagte mir, dass hier die Experten helfen können.    Vielen Dank.    [moved from bugs to discussions according to the community rules - Mod.]

Lightroom will no longer open. I don't recall having to force it to shut down or anything that I saw on other message threads about this issue. I have restarted and completely shut down my computer, uninstalled LC and just now uninstalled ALL Adobe Creative Cloud programs, made sure all the files were deleted, reinstalled, done the preferences reset thing... and still nothing. This is very frustrating. 

Does the latest version of Lightroom provide the option to view on screen which camera focus point was used?  I use Canon bodies if that matters.  Thanks.  

I am using LightRoom classic on iMac and my catlog sizeis 114GB. I set option AUtomatically Discard 1:1 Previews after 30 days. But still catlog size is not decresing. 

Without thinking my decision through, I clicked on "Start Finding Faces in Entire Catalog". I have over 50k images in the catalog with hundreds or thousands of images with large crowds. I do not all of them indexed. I've been trying to reverse that decision by going back to an older backup of the Catalog which did not resolve the issue, and by resetting the preferences. I reached out to Adobe support chat and they told me that resetting the preferences would indeed reverse the decision but that turned out to be false. My question is: does anyone know where this choice/action to scan the entire catalog is stored? And how can I get back to the previous state? I can of course delete the entire application and all the related files, and restore a backup of the catalog from before making the fateful choice. That should clean the slate, right? To be clear: I don't want to pause the indexing by clicking on the top left-hand corner of the application nor do I want to g

I would like the operation of the tools that go with sliders to flow in all numbers equally.When I am moving forward, for example in Contrast, it jumps from number 57 to 61 and it is very difficult to adjust if I want to stop at number 60.It is very tiring when you are developing photos in Lightroom because all the tools do the same thing.It is as if they have favorite numbers, which almost never match mine.Thank you. Best regards. 

I am using LR Classic 13.2 on Windows 10 Pro 64 bit machine.  For MONTHS now LRC has shut down at random times.  A search of threads revealed no solution hence this report.  I had hoped the latest update to 13.2 would solve it but it has not.  There is not pattern I can discern.  Sometimes it happens when browsing photos in grid view.  Sometimes it happens after making an adjustment in Develop.  Sometimes it happens while in the process of making an adjustment in Develop.  Sometimes it happens shortly after starting up.  There is no pop-up or dialog box of any kind.  The PC simply returns to desktop display.  Normally I am asked if I want to back-up as I have set in preferences.  But with these crashes, there is nothing, no warning, no dialog stating a problem has occurred, or anything else.  It just goes away.  I have tried all the usual steps given in advice, i.e. deleting preferences or uninstalling and reinstalli

The photos imported into my iPhone photo library  show 13MP 4496x3000 3MP. now when I open LR mobile and the same pic without even tweaking/using LR features shows file info as 6.5MP 3114x2078 730KB.... Is there an actual drop in resolution? Ray

Good morning, for about 10 days I have not been able to import photos. When the import process starts, everything stops. I contacted support, but I still have not been able to solve the problem. Thanks

I have a camera converted to super color IR by Life Pixel. The method Life Pixel recommends to create a white balance profile is to export a raw file created with the IR camera as DNG. Next, run the DNG Profile Editor, open the file, click the Color Matrices tab, move the temperature slider all the way to the left, then export the profile for use in LR and ACR. This is necessary because the DNG Profile Editor lets you select a much lower color temperature than the Temperature sliders in LR/ACR.The DNG Profile Editor has been abandoned by Adobe. It runs on Windows but does not scale on high resolution monitors. I read on line that it does not run at all on Mac High Sierra or later.The new Adobe Profile SDK, which is Adobe's replacement for the DNG Profile Editor, let's us create profiles in ACR. Unfortunately that does not work for those of us with IR cameras because the Temperature slider in ACR does not have the range of the Temperature slider in DNG Profile Editor as stated above.Yes

I have an external hard drive with two folders of photos that have already been imported into Lightroom. I created a new folder in Lightroom named "All Imported Photos". I'm not trying to move the two existing folders into the newly created "All Imported Photos" in Lightroom. However, every time I try to drag either folder into the new folder, it doesn't work and I get an error message stating "Could not complete the folder move. An uninown error occurred." It's driving me crazy! Does anybody know what I'm doing wrong? Thanks!

LrC for Mac 14.2 Mac OS 15.3.2   When I open LrC everything seems to work fine until I click on the Import button, at which point the system freezes and the only option is to force quit the app.   I've checked my sync status (it's caught up), closed the app (and checked for catalog integrity while shutting down) and re-opened it, and restarted the Mac and tried everything again. Nothing helps.   My photos are stored on a Synology NAS and the catalog is on the MacBook Pro (M2) internal SSD. I disconnected the NAS from my Mac, restarted the Mac, reconnected the NAS, and then opened LrC. Same result. Everything in LrC works fine until I click Import, at which point the app freezes.   Can anyone help?   Thanks.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

HelloI am a user of a lightroom cc for some time.  Recently, I installed the lightroom classic and updated my package.  When I first syn my classic to lightroom cc, i have all my photos in collection and under the title "all photographs".  I want to see my folders in the left hand panel.  How can i do this. I managed to create a folder from "go to folder in library" but it will duplicate the photos in the all photos.  Can you helpRegardsMedhat Michail

I edited a tif file of a person, created three mask and export it as a jpeg. Reopened in lightroom cc then opened one of the masks and adjust the hue using fine adjustment in the color section for the mask. Closed the mask. Then exported with previous. I get the error  "There was an unknown error. (1)".  If I resave without doing any adjustment, it works. If I update the color temperature adjustment in the mask, it works.   [moved from bugs to discussions in accordance with the community rules - Mod.]

I am looking to organize my Lightroom 5 ahead of a migration to current version on new laptop. All my work over the last 5 years is under one FOLDER on LR. I'd like to place those files(projects) into CATALOGS organized by year. Any suggestions on best course of action? Thanks

Hello everyone!I get this message when I start Lightroom Classic:   " An error prevented Lightroom Classic from opening this catalog "I tried this method but still I get this error:  https://helpx.adobe.com/ro/lightroom-classic/help/failure-in-opening-catalog.htmlAnyone knows how to fix this?Thank you!

Running LRC 14.2, Windows 11 with all updates in place and Nvidia video card drivers up-to-date.My issue is I open LRC and scroll through the folder to the one I want to edit. Usually works fine but now when I scroll through to the latest imported images, LRC stops responding, forcing me to restart LRC. Task Manager shows this. It happens when I scroll though to any folder, not just the most recent imports. Any thoughts on the possible cause? 

My patience with Apple has run out. After many years I am moving back to PC. This is because there are simply too many unexplained performance issues.My question is, how to I best prepare to move my entire system.I currently use an iMac where the LR Catalogue is on the internal disk & all the master image files are stored in an external RAID system (thunderbolt). It may be in the future that I trust Adobe to store & manage my master files, but not yet.I sync my entire library to the cloud, which I use on mobile devices for reference. (I have played with editing, but it is still far too restrictive.)I will install a Windows 10 PC next week & my intention is to simply copy the LR catalogue to the internal hard disk on the PC & plug in the external RAID to the thunderbolt port on the PC motherboard.I have no idea if the RAID system will automatically work with the PC, or whether it will have to be reset & reformatted. I will work this one out.I am assuming that the pat

Can I plug my camera card into my reader and then connect to the computer? Or, plug card directly into the slot on the computer?

In "Library" mode I see an image I'd like to edit. When I double click on it and then "Develope" I get a message "File Cannot Be Found" What am I doing wrong?

Hello All... (Thank You in advance!)16+ years ago I had an external hard drive fail on me. As a result I lost close to to 19,000 photographs, videos, etc...A family member recently passed and I thought I'd try to recover the drive that I was unsuccessful with back when it failed, for use in a memorial slideshow.    I found some software that I highly recommended. (ReCuva Pro). Subsequently the software although only some, recovered some of my photographs (3,000+).  However it did recover 213 Zipped Lightroom 4 Preview catolog files.  I dug out my original Lightroom 4 disc and installed it successfully on my current system...   Is there ANY possible way of recovering these files in my current installation of Lightroom 4..??? i would Truly Appreciate Any an All help...  Thank You in Advance...