Lightroom Classic

I imported jpeg photos from my IPhone using a Windows 11 computer. I've made edits to the photos in Lightroom Classic and now I want to export the photos to the same folder.  When I do so, Lightroom converts them to jpg.  So now I have the old photo jpeg and an edited photo jpg. There must be a setting so that I can put them back as jpeg.  Jpg is old naming convention so I suspect there is a place I can change in Lightroom Classic Settings

I would like to create a photo book in Lightroom and send to Blurb to be printed.  I don't want the same layout for every page.  I would like some full size, 4 to a page (2 x 2), 2 to a page (both laid out horizontally or vertically) or some combination of 3 photos. I'm completely flummoxed by Lightroom's book module.  I'd like to start with a blank book, ,specify the overall size of each page, and then say for this page I want this layout and drag the photos on to the page.  Setup a new layout for the next page, and drag photos to it.  Is this possible? When I start the book module, I see this:What do I do next?

Hello. I have purchased a Macbook Pro with iOS Sequoia 15.1 and I would like to know if I can install Lightroom Classic now. Thanks!

Hi I am planning to more my Lr from my old iMac (mid 15) too a new one, (newish, 2 yrs old) it only as a small HD so i want to put the images on a SSD, then run Lr on the iMac,  i want to avoid problems so i am am here asking before i try to cause them!! What is the best way forward? Thanks for any help, Alan 

I have been using LRC for several years now and never had any issues till now.    Configuration: iMac 27" intel i9, 96gb ram, LRC catalog and images stored on external Samsung 980 SSD/ MacOS 15.1.1   I udated to MacOS 15.1 a month ago, LRC seemed faster, but within the last week its been crashing after it completes a denoising batch process.     - I repair the catalog and optimize it and it works fine.    Today I started a batch denoise of 150 images. It completed and I went to open one and it crashed.    I restart the app, its says catalog corrupted!!! I then try and repair it, and it fails to repair.    Now it says "An error prevented Lightroom Classic from Opening this catalog. "   I also updated to macOS 15.1.1 today which was security issue fix so I can't imagine it affected the LRC Cat file.    How do I repair this?    I tried the right click option on the LRC catalog but it does not show any opt

I use both Lightroom Classic v14.0.1 and LR (mobile) v10.0.1. I recently did a major cleanup in Lightroom classic then replicated the updates to the adobe cloud DB. During my cleanup I deleted multiple photos I should have kept. LR Classic has no image recovery. The deleted images still show in LR mobile on my iPad as I have replication disabled. Is there a way to upload my LR mobile images to override the photos in the adobe cloud DB and restore the deleted photos?

HiWhenever I print from LRC, the picture color changes, I thought it's a printer issue, but then when export the image to PC and print from there, the colors are good and acceptable.I put the reference picture here,No. 1 - Picture printed from PC after exported from LRC.No. 2 - Picture printed from LRC with controlled by printer option.No. 3 - Picture printed from LRC with selected color profile option. Thank you

It had always been for me that when in the Transform section and hovering my mouse over the sliders such as "vertical" and "horizontal," etc., gridlines would appear over my image, thus providing me a guide to how straight the objects in the image appear. All of the sudden, though, that no longer happens! I move my cursor there and just nothing happens. Any idea why and what to do about it? Thank you.

So I'm experiencing a strange issue in Lightroom Classic 13.5.1 . Basicilly if I import a raw file and make REMOVE brush edits in FIT view those edits are blurry and lacking in detail if I zoom into 100% or greater. If I make the very same edits while zoomed in at 100% or adjust an existing using the arrow key, the problem resolves itself, and the removed/healed are looks much more natural and detailed.Here's the workflow that might replicate it:1. Make sure your LR isn't set to auto build full size previews2. Import a raw file you've never edited (.cr3 if possible and ideally something noisy since you can see it easier) 3. Go to DEVELOP4. Make sure you are in "Fit" zoom mode NOT 100% etc5. Apply some REMOVE brush to blemishes or other parts of the images6. Now zoom in to 100% or 200% and see if the adjustments lack detail.7. Note that if you move or redo the healing brush it fixes itselfHere's what I know:-Exported images contain these flaws if not corrected-Only seems to affect

In full scree mode I often encounter the lost of the mouse pointer as I use the Brush Object (nothing on the image) or the Eraser tool (the mouse arrow instead of the circle).This issue does not occur with other tools, i.e. the Object mask in box selection (I see indeed the cross). And never in the  regular screen mode. Reinitializing the preferences or GPU acceleration on OFF doesn't change anything.    Difficult to illustrate that as a sceenshot doesn't include the pointer...   MacOs 15.0.1 on Macbook Pro M1   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

Hi everyone, I have a student who is unable to create a contact sheet. Her photos are there and the source is locatable. She is able to edit her photos in the develop tab just fine and export them with no problem, so I know the photos are there! But when she goes to the Print Tab, all of the images in her filmstrip appear to be greyed out and they are unselectable to then put in a contact sheet. I included an image of a photo in the develop tab to show how normal this tab appears and then a photo of what happens when we go to the print tab. I've never had this issue before and can't seem to fine any troubleshooting help! Any suggestions are welcomed! Thanks!

I have a large number of scanned images in 8 bit RGB tiff format with an 'uncalibrated' color profile. My Mac assumes it is sRGB if viewed in Preview although the EXIF data shows 'uncalibrated' for the [EXIF:ExifIFD] ColorSpace tag. I asked the company that did the scans what color profile they used in the scans and they said sRGB.Since the tiff images were uncompressed they were extremely large so I decided to compress them with Adobe Deflate (zip) in Lightroom Classic 14.0.0 (Mac running Sequoia 15.1). This required to export them as 8-bit tiff and to assign a color profile, so I chose sRGB (sRGB IEC61966-2.1 to be exact). There were no edits to any of the images so I expected the exported tiffs to be identical, except for being compressed.Visually, the exported tiffs with Adobe deflate (zip) were identical. However I happened to do some image comparisons of the original uncompressed tiff and the exported zip tiffs with BeyondCompare  and was surprised to see small changes in RG

I recently upgraded to 14 from 13.5. For 13.5 and prior, I had no issues. With 14 - Lightroom now occupies 98-100% of my memory and is very slow. Slow to edit, slow to export. Has anyone else come across this and any possible fixes? I have 24 GB of RAM and think I can add only another 8 on that motherboard - but like I said - never an issue before.Thanks.

Hi, I have attempted to process a short timelapse sequence from 82 ARW (Sony) images. I applied settings in Lightroom Classic, synced to all and did an export to JPG. Unexpectedly, the files randomly differ in brightness, and in color tone, from image to image. Surprisingly, this is also visible on the images stripe in Lightroom. When scrolling from image to image I can also see that even histogram looks different from image to image. When I export the same images sequence in other program, like Irfan, without processing, the images are precisely even. What is wrong here?In past times, when using Adobe Camera RAW in PS CS2 or 3, I do not remember, I had completely no issues. I processed hundreds of timelapse sequences, and the only differences between frames were from imperfections of mechanical shutter in SLR I used. Now this looks completely like crap. 

Hello, I am experiencing a serious synchronization issue between Lightroom Classic (14.0.1) and Lightroom Mobile. I have summarized the current situation below to specify the problem:             1.         I cannot see the photos I imported into Lightroom Mobile in the “All Sync Photos” section of Lightroom Classic. For instance, there are currently 701 photos in Lightroom Mobile, whereas this number is 671 in Lightroom Classic.            2.         The second issue is with the shared photos that exist in both Lightroom Mobile and Lightroom Classic. When I make an edit in Lightroom Classic on one of these shared photos, the change reflects on the photo in Lightroom Mobile. However, when I make an edit on a shared photo in Lightroom Mobile, I cannot see this change in Lightroom Classic. It see

BonjourLe DDE contant les originaux des photos a planté. Je peux donc voir mes photos sur LR classic mais je en peux plus les travailler, le lien étant rompu.J'ai sur d'autres DDE les originaux de mes images. Y a t il un moyen de ré importer ces images de façon a ce que LR reconnaisse les originaux et que je puiise recuperer le travail fait sur ces photos?Merci d'avance pour vos réponsesBonne journée à tous

I am viewing my contact sheet after finalizing PDF on Adobe Acrobat and on my phone and it is extremely over satruated in many of the photos. I need to not be as saturated. Is there a setting I can changeor is this a bug? 

Hi, So I have this weird issue I can't seem to find any solution to when editing my photos. This is a issue that ONLY happens when using Adobe software, either Lightroom or Photoshop, nothing else. As I edit the photos, in either of the apps, the display goes black and comes back a second later. It's like the monitor keeps disconnecting and reconnecting. As mentioned, this issue is ONLY present with Adobe. I have tested in everything else I use my PC for, and it's not happening. I have updated Adobe, display drivers, tried other cables etc, but nothing seems to be working. Has anyone experienced this before?

Hola, a continuación os detallo los pasos que realizo y el error que me sale en pantalla con el plugin de Luminar neo como complemento: 1.- Combino en Lightroom Classic tres fotografías con varias exposiciones diferentes de la siguiente forma: selecciono las imágenes, botón derecho exportar/HDR Merge in Luminar Neo2.- Se abre Luminar Neo y le doy al botón de combinar en HDR y procesa la combinación3.- Le doy a aplicar cambios dentro de Luminar Neo4.- Se cierra Luminar Neo y me aparece un aviso de error en pantalla con el siguiente texto: No se Puede Exportar: Se ha producido un error interno: AgImportSession.addOnePhoto To Library: failed to import photo (imagen adjunta) Espero me puedan ayudar. Gracias de antemano.

Ive changed so many settings. Clear cache. I only have 190 photos in catalig that im working on. My lightroom classic is v13-3 and windows up to date. I have 195 gb free on my laptop and my LR is running so slow it takes me 20 min to edit on picture. Help! If i post my system info will someone help me figure out whats wrong?!

I first tried to move some images from LRC to PS using one of the "merge in PS" functions in LRC, but nothing happened.  I had used the same function days before and everything worked correctly.  I ended up manually going from PS and finding the photos location and doing the merge.  I continued working with my group of pictures in LRC and was ready to export.  I selected the images as usual and went through export procedure selecting where and how it should handle the pictures, hit go and it seemed to start, (showed a bar at the top left saying "exporting 57 jpegs", but the bar went immediately to 100% and froze.  I looked in the folder they were supposed to be saved in and there was nothing.  I tried several times with the same result.  Restarted LRC and restarted the computer, same result except no bar comes up in the top left corner.  No errors are displayed either.  My version was updated to V 14.0.1 in the last month.  I use Window

I would like to know how I can edit an image, save the edited image, and re-edit it at another time. Now, if I edit an image and then delete it from the library (not the disk) then re-import it , all the edits are gone.