Lightroom Classic

I am having this exact same problem,   https://community.adobe.com/t5/lightroom-classic/dji-mini-2-dng-not-correct-supported-by-lr-classic-v10/td-p/11595491?page=1 

This thread has been going on since April when LR CC was released. Please read; https://forums.adobe.com/thread/1827333 So Adobe released Lightroom CC 2015.1.1 and new Wacom driver 6.3.13w3. In hopes of a remedy I thrashed Lightroom .plist preference files (keeping a backup) under my user account and did a fresh install of Wacom driver keeping nothing from previous version. Did that do any change? ... NO! I'm getting seriously tired of this prolonged bug and it still affects; grabbing slider values and dragging (scrubbing ie. white balance), setting and dragging adjustment points on a RGB histogram, HSL picker tool and generally all sliders when scrubbing. As said before it needs a good push to activate any change, moving the pen fast and quite a bit of travel, then it jumps and moves alot. Thereafter it is somewhat smooth until you release the pen. Using mouse or tablet touch is as perfect as before, but I want to use the pen all the time. I belive that thelazydesigner is right about

Hi   I updated LrC to version 10 without problems.    But I immediately found an issue in the German user interface (see screenshot): In the Library Module the label of the button "Einpas." is cut off, in the Develop module it is not.       System details:Windows 10 1909LrC 10 (German Layout)4K MonitorRTX 2070  

Good day . I find bug in Lightroom CLASSIC CC  in the print module latest VERSION for win 10(i didn't check it on mac yet) LOOK AT THE VIDEOhttps://youtu.be/WjeAjW-kEoothanks

My operating system is MacOS Catalina 10.15.7. With the new LRClassic update 10.0. When I change the WB from As Shot to Daylight in the Develop module with the Profile at Camera Standard (Nikon D500 and D850 user) whether I have made other changes to other sections of the basic panel or not and then copy and past to another photo or sync to other photos (same sequence and same camera WB settings) the WB label changes to Daylight in the photos copied to or synched but the sliders (and the setting) do not change. I then have to go to each individual photo copied to or synched to and change wb back to as shot and then to Daylight and then it works although then the preveviews in the thumbnails in the film strip below are erractically slow to resolve. This does not happen if I have just changed the Temp or Tint slider or both but only if I have clicked on the Daylight option. I have tried disabling all plug ins and no change, I have turned of the computer completely and turned it back on e

Hi,I'm using a dual display configuration (Windows 10 2004). When using the Grid mode on the main display, the Home/Ctrl+Home and End/Ctrl+End key have the expected effect (going to the first or last image in the Grid).When using the Grid mode on the secondary display, these keys have no effect. I didn't notice this before version 9.3 but I'm not sure.Is there any reason for this inconsistency ?

When I click "Check All" in the Copy function and then uncheck Color Grading, Color Grading is always copied anyway.  If I click "Check None" and then individually check each box except for Color Grading it works as it should.  I don't think this issue applies to any of the other settings, but I am not 100% certain.

I just installed LrC 10 and when I went to add images to a target collection, I get the following error: ?:0: attempt to compare two nil values.  This is really holding me up organizing my photo book.  Please help.

The Collections panel shows just one collection after restarting LR with the panel collapsed.   To reproduce:   1. Select all All Photographs in a catalog with at least 1000 pics and a mix of at least 15 collections, smart collections, and collection sets.  2. Collapse the Collections panel.  3. Restart LR.  4. Expand the Collections panel and wait a second or two.  5. Collapse the panel, wait a second, expand the panel.  6. Observe that after a second or two, only the first item in the Collections panel is displayed.  See this screen recording: https://www.dropbox.com/s/colwkzomf91eamd/collections-panel-bug.2020.10.20.mov?dl=0    A workaround is to change the panel from Sort By Name to Sort By Kind, or vice versa, and then collapse and expand the panel.  Another workaround is to expand the panel and then restart LR.   Tested on two instances of LR 10.0 on Mac OS 10.15.5.  I can't reproduce this on Windows 10.   &nbs

Sometimes (seems to be random) after unlocking and locking the crop perspective in one picture and then moving on to the next image, the crop perspective is unlocked again when cropping the next image (despite having relocked the perspective in the previous image). Is there anyway to keep the crop perspective lock the same when moving to another image?

New bug in V10 of Lightroom Classic. Setting a star rating on a photo in Grid view is not carried into Compare view.   Mac Catalina 10.15.7 Lightroom Classic 10.0

Just update the last version of lightroom classic 10 and i have an error message "Agnegativestyle manager_new exception thrown: Agerrorid>dngfil_error_file_not_found The picture dies'nt show except on top leftplus, when i want to export to the new update of photoshop 2021, it open photoshop, and immediatly close just after i can do anything..Si I can not use both of them...     I've already try to desinstall and re install both and nothing change...   Im on windows 10, last update 1909 nvidia last update driver too  There is my pc set up config, not old at all and good enough.   there is my spec via lightroom:   Version Lightroom Classic: 10.0 [ 202010011851-ef6045e0 ]Licence: Creative CloudParamètre de langue: frSystème d'exploitation : Windows 10Version : 10.0.18363Architecture de l'application : x64Architecture du système : x64Nombre de processeurs logiques: 8Vitesse du processeur : 4,2 GhzVersion SQLite: 3.30.1Mémoire intégrée : 32725,1 MoMémoire réelle dis

My current setup is a MacBook Pro 15 Mid 2012 with Catalina 10.15.2 and LR Classic 9.1. The LR catalog is on the local disk (SSD). The images itself are on a Synology NAS connected via SMB. When I try to import photos from my iPhone 6s Plus, LR lets me select the pictures and correctly detects duplicates in the catalog (which are then grayed out). When I start the actual import though, LR just hangs forever. Cancelling the import works and then I get the message that there was either a read or write error.Strangely the following works reliably:- Importing from the same iPhone to a local folder (so it cannot be an iPhone problem)- Importing from a local folder to the shared folder on the NAS (so it cannot be a NAS problem)What is NOT working is the combination of importing from an iPhone directly to a NAS folder. 

I am running Lightroom Classic 10.0 on a MacBook Pro (macOS Catalina version 10.15.7) and Lightroom keeps crashing when importing or exporting images. I’ve made sure I am running the latest software and updates, I’ve tried restarting my computer multiple times, I’ve reset my LR preferences and the catalog I’m using was optimized today. This issue started happening when I was still running LR 9.4 and then I updated to 10.0 and nothing changed. What can I do? I’ve never had this happen before today.

When sort order is set to date order, it then changes to custom order each and every time an image is edited in Photoshop

Hello, I believe this is a bug..When using edit in Photoshop from Lightroom with TIFF format set, none of the compression settings work. Because when the file is saved in Photoshop (ctrl+s) and comes back to Lightroom it's always an uncompressed TIFF. Every other setting works.Unfortunately I can't tell whether the fault is on Lightroom or Photoshop side..Tested on Win 7 - 64bit with LR 3.6 - 64bit and PS CS5.1 - 64bit, also on Win XP - 32bit LR 3.5, PS CS5. (In both cases camera raw version match) Lightroom 4 behaves the same.I would appreciate your replies, Thank you

They used to be sorted alphabetically. In version 7.3 the order is random

When launching Lightroom 6.7 on Windows 7, it can take a little while to initiate and do it's thing (even loading from a fast SSD). Normally that'd be fine as I just bring other programs to the foreground and continue with other tasks while it loads in the background. However, I count 3 times where Lightroom steals priority from whatever other program I have just to show me the next step in its loading process. Please make it stop or only do it at the very final step?

When enlarging and exporting a file with a transparent background as a PNG file from Lightroom this happens  

Hi Guys, I have a problem with the RAW file of an in-camera double exposure that has changed colour dramatically and I'd appreciate any advice. Image 1. - this is the base image for the double exposure. This is image 2 of the double exposure: This is image 3: - the in-camera merged double exposure.  The image below is SOOC and exported directly from Lightroom last week and these are the colours I would like to keep.  This image is a low res jpg and is all I have left of the original colours as the RAW version in Lr has changed to nuclear Yellow. This is the RAW file showing now as funky, nuclear yellow.  Despite resetting all the settings and even reimporting the files I am stuck with the yellow and can't  get the original colouring back.  I can get it to revert to green by using Auto WB in Lr but it's not the same as the original. There has been a long discussion in The Adobe Support Community and the thread for that can be read here: https://community.ado

Many Nikon DSLR's have an overlay function which combines (overlays) two NEF images to produce a third NEF image in-camera. The source images don't have to be different, so an image can be combined with itself, which is what I did for this example.I have noticed that for such combined images, the WB for As Shot has Temp: 2880 and Tint: -119, regardless of the WB camera setting of the original images. In this example, I shot an image with my D750's WB set to Daylight. Importing the original image into Lr Classic 8.0 gives the As Shot WB as Temp: 5300 Tint: +7, which is always the value for this WB setting. See the screen-shot below:If I change the WB from As Shot to Daylight, the values change slightly to Temp: 5500 Tint: +10, as shown:Combining this image with itself using 0.5 for the contribution of both source images to make a new overlayed NEF and importing into Lr, in develop I see this:White balance for the image looks fine, but the settings aren't right for the WB camera setting.

If two selected photos have different entries in a particular field, LrC displays <mixed> in that field. In version 9.4 (and earlier), after synchronizing metadata, LrC would update the display of the field with previously different data and display the field showing the now identical data. In LrC 10.0.0, the field is not updated to display the data. It still shows <mixed>. After deselecting the selected images and then reselecting the images, the field correctly displays the updated (identical) contents.   Steps to reproduce problem: In the Library, select two images for which a given metadata field (e.g., Title) are DIFFERENT. In the Metadata panel, the field will display <mixed> Click the Sync Metadata button at the bottom of the right side panel.  Be sure that the field in question (e.g., Title) has its checkbox checked in the Synchronize Metadata dialog box that appears. After clicking the Synchronize button, the field (e.g., Title) will still sho

I have noticed the Splash Screen being displayed two or three times during startup of Lr Classic 8.3 along with (not responding). My OS is Windows 10. The problem seems to be easier to replicate when launching Lr in the Library showing the grid view. In Preferences, the "Show splash screen during startup" option needs to be enabled. Here are my steps to reproduce the problem: Launch Lr Classic 8.3 and when the splash screen goes off, click on the interface - I've been clicking on a blank area of the menu bar. The splash screen briefly shows again and Lr shows (not responding) while the splash screen is visible. After a few more seconds, the splash screen is displayed for the third time and Lr shows (not responding) again. Waiting for a further short while, the splash screen goes off again and Lr resumes initialising itself.

After upgrade to LR CC2015.8, short cut X to reject an image in Library module is out of order.Shif+X is OK ?

In the Library module, I select a group of photos and use "compare" mode. Up until I upgraded to 9.4, I could use the arrow keys on the keyboard to move between the pictures in the group. That's broken now. It's not my keyboard (keys work fine). The graphical arrows on the Lightroom interface still work with the mouse.