Lightroom Classic

Olá, estou tentando realizar uma captura vinculada e o Lightroom não está identificando a câmera. Estou utilizando uma Sony 7CM2, um Samsung Book 4, Windows 11… Já testei em um Dell e a câmera vincula corretamente, mas no Samsung não conecta. Alguém enfrentando o mesmo problema?

If you hit the escape key in the Import dialog, the dialog is exited and all organization is lost. The expected behavior would be to exit Loupe View and return to Grid View (staying within the Import function) as happens in the Library Module. I have muscle memory for this behavior and I keep destroying my organizational work within the Import dialog--(ie: checkmark selections for "Include in import") Either make the behavior consistent between the modes, or add a warning that "All selections will be lost, exit anyway?" Thanks, --David Aughenbaugh

While working on a project doing a lot of parameters sync, all the pictures suddenly disappeared from the directory.There were 258 pictures in this directory.The directory on the disk is also empty.I have copied back the files from a backup and re-sync the directory in Lightroom.I had to do again the modifications I have done before.

I’m running a printing workshop and had to setup a group of mac and windows computers to print on my Epson P900. The printer is using the latest firmware. All the Tahoe computers failed, everything else passed, here is what happened.For each computer, we went to the Epson support page and downloaded the driver for their operating system. None of the computers had connected to the P900 before, so there were no old drivers present. Most of the Mac computers were running Tahoe 26.6.1 or 26.6.2, some were on Sequoia, PC’s were on Win11.We ran the driver installers without issue. For all the Mac’s, we removed the AirPrint printers and added the Epson versions all went well.We opened the Print module in Lightroom and started to setup a print. As soon as I selected Page Setup and chose the Epson P900, something was sent to the printer and it started operating. The printer raises an error on its screen asking for the roll paper adapter to be added. The error can be cleared down and the printer

LrC --> Library --> library Filter: when I set on filter type "raw" and I view date by date, with every change of date the file type filter switches to "all types", so it does not stick on type "raw".  Can I keep it fixed on a certain type?

Oftentimes, I cull my images in Lightroom and rate my selections from 1–5 stars. Once I’m finished, I want to filter the images to show anything rated one star or higher. However, Lightroom frequently defaults the filter back to “equal to”, so clicking one star only displays images rated exactly one star, causing me to miss images rated two stars or higher.I recommend adding an option to lock the star-rating filter setting to “greater than or equal to” so Lightroom remembers the user’s preference instead of continually reverting to “equal to.”Rating is equal to - This auto populates all the time and sometimes I dont notice. 

In the Print Module, I select a paper profile and make a print.  If I move back to another module like Library or Develop to select/change a photo and then return to the Print Module, it has forgotten the paper profile and I must re-select it.  It used to remember the profile in much earlier versions.  I have 15.5 of LrC running on Win 11.  I know 15.4 had this bug and I was hoping that you had fixed it.

I installed the latest update a few days ago.  This is for Lightroom Classic 15. Ever since that time, when I try to read metadata from files, it never completes. I can highlight 5 images at a time and successfully get it to complete, but if over 6 images, it starts and never completes.  

Al actualizar Lightroom Classic desde ayuda, me responde que las actualizaciones se han deshabilitado para este equipo. Ponte en contacto con el administrador. Cómo lo soluciono? Quería actualizar a la v 15.3.1 ya que la instalada es la v 14.3.1Al actualizar Lightroom Classic desde ayuda, me responde que las actualizaciones se han deshabilitado para este equipo. Ponte en contacto con el administrador. Cómo lo soluciono? Quería actualizar a la v 15.3.1 ya que la instalada es la v 14.3.1

Lightroom is incredibly slow to un-useable. I can use LrC with no problems on my M2 MacBook with 24Gb RAM Memory. I have cleared cache and cleaned my hard rive so plenty of space. all photos held on external 1Tb hard drive as well.

Has anyone else run into this problem and were you able to resolve?

Since recent Lightroom Desktop updates, rapidly culling imported photos has become noticeably slower.Steps to reproduce:1. Open a large series of imported photos in Detail view.2. Enable Caps Lock for automatic advance.3. Press and hold Z to flag photos as Pick, or X to flag them as Reject.4. Keep the key pressed to move continuously through the series.Expected result:Lightroom should advance through the photos quickly and smoothly while the key is held down. Previously, this worked almost like watching a high-FPS burst as a video.Actual result:The flow now repeatedly stutters and stalls. Lightroom pauses between photos before continuing, making this fast culling workflow much slower than before.System:Lightroom Desktop, cloud-based version 9.5macOS 26.6.1MacBook Pro with Apple M3 Max and 128 GB memoryAdditional information:I work with Sony α1 II cameras, producing RAW files of approximately 55 MB each. Lightroom previously handled rapid culling of these files smoothly.My MacBook Pro h

Bonjour,Je rencontre un problème persistant avec le module Impression de Lightroom Classic, et les différentes procédures de dépannage déjà effectuées n’ont pas permis de le résoudre.ConfigurationLightroom Classic : 15.5 Build : 202607291506-b8869fa7 Système : Windows 11 – 64 bits Version Windows : 11.0.26200 Processeur : 12 processeurs logiques Carte graphique : NVIDIA GeForce GTX 1060 6 Go Camera Raw : 18.5 Catalogue principal : C:\Users\jadly\Pictures\Lightroom\Lightroom Catalog.lrcatDescription du problèmeDans le module Impression, le menu Style de disposition propose normalement :Une seule image / planche contact Collection d’images Collection personnaliséeCependant, lorsque je sélectionne Collection d’images ou Collection personnalisée, l’interface ne se met pas à jour.Les panneaux de droite restent systématiquement ceux correspondant à Une seule image / planche contact, notamment :Paramètres d’image Disposition Repères Page Travaux d’impressionLes panneaux attendus pour les mode

Hello,   Since upgrading to my new very powerful system, Lightroom Classic (version 15.0) has been performing extremely slowly.   Issue description: There are significant delays (several seconds, sometimes up to 10 seconds) before Lightroom responds, particularly when using the following tools:   • Masking (people, subject, background)• Color mixer / color correction• Crop overlay tool   All basic adjustments (exposure, contrast, highlights, shadows, etc.) work normally. Other Adobe applications (After Effects, Photoshop, etc.) run completely smoothly. My previous, weaker system did not have these problems.   System specifications: • Windows 11 Pro (x64), Build 26100.6899 (25H2)• NVIDIA GeForce RTX 5070 Ti (AMD onboard GPU disabled)• AMD Ryzen 9 9950X (16 cores, 4.30 GHz)• 128 GB DDR5 RAM (4×32 GB Corsair)• Mainboard: ASRock X870 Steel Legend WiFi• Catalog located on an external SanDisk Extreme SSD (1 TB) connected via high-speed USB hub   Steps already ta

 I edit/process a photo (LRc 15.5) which includes several masks with mask refinement settings of edge and feather. After reviewing the edits I decide to start over and select the RESET button which then resets all sliders/setters to 0 or other baseline values. All values verified in Develop Module as reset I start editing the photo again with new edits and masks A sky mask (or other previously used mask which has mask refinement capabilities) is placed on the photo Mask Refinement feather - edge values, 10 - 3 seen in prior editing session still seen in the placement of the new mask just applied Photo again reset to baseline values. Photo verified at baseline values and no masks applied Sky mask applied to photo Mask refinement edge/feather values at 10 - 3 as seen in prior ediitng session. This process was repeated several time on several differenct photos with the same results. Mask refinement values can be reset manually or by hitting the mask refinement RESET button.

With recent update of Lightroom release 15.1 and camera raw 18.1 on Windows 11,  the software cannot detect people in some photos for masking even though they are very obvious in the photos (see the example attached). I haven't seen such an issue before recent update. Can anybody provide some insights about it? What could be wrong and how to fix this issue? Thanks in advance.   [moved from bugs to discussions according to the community rules - Mod.]

If I turn off GPU usage in preferences and restart LR I get the same result - a dark mono image displayed after denoise.The system info from LR is as follows:Lightroom Classic version: 15.5 [ 202607291506-b8869fa7 ]License: Creative CloudLanguage setting: enOperating system: Windows 11 - Business EditionVersion: 11.0.26200Application architecture: x64System architecture: x64Logical processor count: 16Processor speed: 3.6GHzSqLite Version: 3.36.0Adobe GSDK Version: 1.4.0.213CPU Utilisation: 0.0%Power Source: Plugged InBuilt-in memory: 32315.4 MBDedicated GPU memory used by Lightroom: 1194.5MB / 128.0MB (933%)Real memory available to Lightroom: 32315.4 MBReal memory used by Lightroom: 5499.2 MB (17.0%)Virtual memory used by Lightroom: 5962.6 MBGDI objects count: 841USER objects count: 2612Process handles count: 2270Memory cache size: 724.2MBInternal Camera Raw version: 18.5 [ 2673 ]Maximum thread count used by Camera Raw: 5Camera Raw SIMD optimization: SSE2,AVX,AVX2Camera Raw virtual mem

Hi there,I got a new computer after a couple of years of exclusively using Lr mobile or on the iPad.Since my cloud quota was quite full, I’m in the process of syncing all my photos from the cloud down to LrC. The plan is to take the photos synced down out of ‘All synced photographs’, then put them back in order to upload only the smart previews. I’ve seen a lot of users do this successfully! However, for any photos in which I’ve tried this process (I’ve attempted this with very small batches before committing to all my photos) the sync process gets stuck at uploading.Please note:If I’m importing brand new images into the catalog and into ‘All synced photographs’, putting them into a collection or not, the syncing behaves as it should. There is no items pending sync in any other devices, and no items in the ‘sync errors’ folder in Lr web. I have updated LrC to the latest version.I’m really at a loss here and will appreciate any help.Thanks in advance!

Hi,I recently switched from a MacBook to a Windows PC, and it seems to me that Lightroom Classic is not working properly — although Adobe support says everything is fine.The program runs very slowly. When using masks, there is a noticeable delay in the preview, and the image appears to jump or refresh. I’ve attached a video below showing the issue:https://youtu.be/Rdp1xHr3LAk?si=JiAgedctehGnfyoIIs this normal? On my MacBook M1 I never had any problems with smooth performance.I also noticed that when Lightroom Classic is open, the entire computer seems to slow down — even moving a Chrome window feels laggy and stutters. When the program is closed, everything becomes much smoother again.Here is my computer specification: AMD Ryzen 9 9950X3D ASUS Prime X870-P WIFI 192 GB DDR5 5200 MHz RAM RTX 5080 16 GB 2 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 4 TB Samsung 990 PRO M.2 (up to 7450 MB/s) 1200 W BeQuiet modular PSU Fractal Meshify

When I try to open LrC a system error pops up, "The code execution cannot proceed because mfc140u.dll was not found. Reinstalling the program may fix this problem" I have tried to uninstall and reinstall, and it still pops up.

tijdens het analyseren van grote import sluit het programma steeds af.Hierdoor moet je iedere keer opnieuw beginnen en kun je je workflow niet afronden.

OS Name Microsoft Windows 11 ProVersion 10.0.26200 Build 26200Processor AMD Ryzen 9 5900X 12-Core Processor, 4001 Mhz, 12 Core(s), 24 Logical Processor(s)BaseBoard Product ROG STRIX X570-E GAMINGInstalled Physical Memory (RAM) 64.0 GBGPU 3080Ti with latest Studio DriverHoping to get some assistance here.After a stage photography gig last night, I’m now sitting on about 1500 images to get through. It pushed me to finally look into why my setup has been struggling.For a while now, Adobe Lightroom Classic just hasn’t been running like it used to. Editing feels sluggish, and once I get into Develop—especially with masks—it really starts to grind.What’s frustrating is that it used to run smoothly on this same machine. Something has clearly changed, and I’m trying to figure out what.In the Adobe Lightroom Classic System Info, I’m seeing GPUDeviceEnabled: false, which (as I understand it) means Lightroom isn’t actually using my 3080 Ti.What’s confusing is that:In Lightroom Preferences → Perfo

Bonjour, je veux exporter ma photo de lightroom classic sur photoshop mais ça ne fonctionne plus, photoshop s'ouvre mais pas d'image , merci pour  votre aide. Version Lightroom classic 15.5 et Photoshop 27.9.1 et je travail sur Windows

Depuis la dernière mise à jour version 15.5, lorsque je shoote en mode connecté via USB, boitier canon 5D MKIII, lorsque je veux sélectionner mon collimateur de mise au point, j’appuie sur le bouton de mon boitier pour faire apparaitre mes collimateurs, et l’affichage disparait aussitôt. impossible dans ce cas de changer le collimateur. Cela fonctionne lorsque je ne suis pas connecté et avec la version précédente de LR (15.3.1) car la suivante me posait des problèmes, je ne pouvais plus déclencher mon appareil après quelques photos, toujours en mode connecté

 Hi everyone,First, ChatGPT helped writing this post since i have been talking with it about this question yesterday the whole day. now the question below:I'm having a really weird problem with Lightroom Classic and I'm running out of things to try.When I switch Lightroom Classic to Chinese, most of the UI becomes garbled/unreadable. The really strange part is that the top menu bar displays Chinese normally, while most of the rest of the Lightroom interface is messed up.Even stranger: Photoshop on the same PC displays Chinese perfectly.So I'm starting to think this might be something specific to Lightroom's UI/text rendering rather than a general Windows Chinese-font problem.SystemWindows 11 Build: 10.0.26200.8875 Lightroom Classic 15.5 Windows display language: English (United States) Display scaling: 150% Lightroom scaling: Auto Chinese fonts: Microsoft YaHei installedThings I've already triedI've gone pretty far down the troubleshooting rabbit hole:Uninstalled and reinstalled Lightr