Premiere (Beta)

Everytime I create a new project my project window defaults to the left side but I have moved it to the right side and chose to save workspace changes but they don't get retained.

Ugh. I've had this stupid error a few times (on the same project). I have a very simple 4K edit in PPro. It has one bit of "black video" (created using New Item > Black Video) and whenever I export via AME, it warns me of a "missing asset", and that missing asset is the "black video". Obviously I can't "relink" this black video, because it has no source - the Media File path (as you'd expect) in the project panel is blank. And it plays back perfectly in PPro anyway, so it is not in fact missing. If I export it (via AME) anyway, instead of being a bit of black video, it does indeed show the red "media offline" thing. What a stupid bug! I then deleted the black video from my timeline and the black video from my project, created a brand new bit of black video, slotted it into the timeline and exported again from AME....same "offline" result. I then exported directly from PPro, and it exported perfectly. I'm on the latest PPro beta and AME beta, but this error also occurred a

There's any number of timse when I hit play and any dialogue I've previously cleaned up with Enhance fails to apply the enhancing and it cuts in and out and sputters during playback until it eventually stabilizes and plays back properly.  It is...an annoyance.

Hi, In the latest Beta (v24.4.0 BETA Build 24) I am constantly getting audio cut outs and freezes with either of these two errors appearing.It'll either say "Audio not found at 00" or "Audio Disk I/O Overloaded".This is happening with proxied files as well as normal .WAV files. I have tried using MME as well as ASIO (GoXLR) and they both have this problem.Thanks

i had a problem with premiere pro (Beta) v25.0 preview with .mov files. i tried to fix it with all steps on foruns and contacting adobe support 2 times, all solutions were stop using GPU Acceleration or GPU driver issue... but it not make sense (because disabling the GPU Acceleration the preview freezes or preview just not work with correctly smooth performance and i repaired 3 times my GPU Drivers), so i keep searching for a solution and i try go to Premiere Pro older version, v24.6 and the error just gone (and my work project too because dont open on this version...HAHAHA😭). So now it's working all fine, normal, but this error need to be fixed because in logic, the newer version need to be better than older...In foruns i saw that happens in 2020 with Beta version too, but fixed on next patch... and now it need to do again, please. It will save my project work 3 days...  My PC configuration is:Processor: Ryzen 5 3600Graphic Card: AMD RX 5700XTRAM: 32GbOS: Win 10 Pro

Hi everyone, I’m having some crazy issues with Premiere Pro Beta, and I’m hoping someone here might have some advice or has encountered something similar. I’ve been using a set of LUTs that I bought from a YouTuber (Stalman). They’ve been working perfectly in the standard version of Premiere Pro, with no issues at all. They were working fine on PP Beta until this week and any LUT I apply is coming out way oversaturated. The colours just don’t look right—they’re really not organic, and the final result looks completely off. Unfortunately, because I’ve already started working on this project in the Beta version, I can’t roll back to the regular Premiere Pro without losing progress since the project file won’t open in the older version. Yo you can see the oversaturation and colour shift that’s happening. No adjustment to Lumetri. Just LUT applied?! Has anyone else encountered this issue with LUTs in the Premiere Pro Beta? Or does anyone have any suggestions on how

Steps to reproduce:    1. Render a "red" section in a sequence    2.  Section turns green, has been rendered, rendered media exists within the Production default location           (same as Production folder).    3. Move sequence to a separate Project within the same Production    4. Close both projects, hit saveResult: Open project with rendered sequence, render media is offline, deleted from default render location, needs to be re-rendered.Expected: Renders to stick regardless of where a sequence lives. System info    Application: Premiere Pro (Beta) v24.5.0.48    OS: macOS v14.6.0, RAM: 64.00 GB GB, CPUs (logical): 24

I used to be able to drag graphics into the source monitor in order to edit (move/delete) markers. I cannot drag graphics from the timeline into the source monitor anymore. As a result I cannot edit markers on a graphic.   Build 29.

Hello Adobe Community,I've been encountering significant transcription issues in both Premiere Pro and Premiere Pro Beta. The transcription feature is struggling to accurately transcribe sentences, often capturing very little correctly. This is surprising, as I've never faced such extreme problems since the feature was first introduced.I'm currently editing an interview that was recorded with an external microphone, and the audio is embedded directly into the video file. This has never posed an issue before, but now the transcription tool is skipping entire minutes of dialogue, making text-based editing completely impossible.Has anyone else experienced similar issues, or does anyone have suggestions for a solution? Any insights would be greatly appreciated.Thank you!

Getting massive drawing errors for a while now. W11 last couple of builds Rolled back nvidia driver    

Hi Adobe community,I am using Adobe Premiere Pro Beta 24.2.0 Build 77 and all of a sudden all the label colors got darker.  Is this happening to anyone else?  The previous colors were brighter and easier to see and navigate on the timeline.  Thanks!Adobe Premiere Pro Beta 24.2.0 Build 77iMac Pro 2017Ventura 13.6.3

Beta Version 25.0.0 track tool is faulty.  I have a 2-cam multicam timeline using HD prores files and proxies as well.  All footage is prores 422 LT. Sequence 20 minutes long. I track forward and when I try to move the clips premiere freezes for 30 seconds or more but eventually with make the edit change.  This has never been a problem before.  Track forward tool has always worked in real time.Another bug, when I put an in and out point, the time of the in/out point in the lower right side of the program monitor does not update.  This is a very important feature of all editing programs but for professionals, a must! Edition Windows 11 ProVersion 23H2Installed on ‎6/‎13/‎2024OS build 22631.4037Experience Windows Feature Experience Pack 1000.22700.1027.0 Manufacturer Micro Electronics, Inc.Processor AMD Ryzen 9 5900HX with Radeon Graphics 3.30 GHzInstalled RAM 64.0 GB (63.4 GB usable)Device ID 556A18D5-5159-4C92-AA8F-032CB6F73A30Product ID 00330-53736-0

Build 25 crashes quite easily without warning. W11

the delete feature when you select a section (like filler words) does not delete like it used to. None of the right click features work in the text editing like cut, delete ripple or just delete.

As the title says Corner Pin reverted to non accelerated effect. I am not a happy camper. Corner pin being gpu accelerated effect is the main reason I use the Beta. build 12   Reverted to 24.3 beta.

This has been an issue for a while. Layer properties of project files that have been created before the update all have been reset. Effects and animations are still there. You would just find the layers stacked and centered in the video with no rotation, scale, position, anchor properties saved. All reset. Graphics have not been affected. Only pictures and videos. I can't trace exactly what update started all this reset since I didn't need to access those project files, maybe when  the properties panel was introduced.   Current Premiere Beta Version: 24.6 OS: Windows 11/10

We work on a team project, when someone in the team made some changes in the project and Publish it, the others members of the team don't see the UPDATE button activated. We need to midify something, publish it and after that just before publish we receive a message that an new version is available click update!! 

Getting the error message "Matrix cannot be inverted" when trying to open the project window for a very simple project.    Beta 25.0.0.0 build 23