Questions

Hi all. I'm new to Adobe Audition. I made a multitrack file (.sesx) and I maintained a good habit of saving it (File --> Save). I accidentally chose to rendered all stretched clips and my Macbook soon ran out of memory. I had to force quit it but after I reopen the Audition, my work was gone. The multitrack file was in its very primary status and looked at I had never touched it. Is there a way that I can retreat the latest edited multitrack file? I'm using Adobe Audition 22. Thank you in advance! Xingze

Hi I had a long mix that I split with CD markers to export into seperate tracks, but when exporting each track is exporting at the size of 2.99gb each and I ain't a clue why they are so big. Does anyone know how to fix this issue? 

Recently upgraded to Windows 10, and ever since when using AAC or ALAC m4a files in Audition, it will cut off the first 0.1 seconds of any file I import. I've tried installing the Apple QuickTime filter, but that did not solve the issue. Is there a solution?

How can I remove the line of noise you can easily see in this spectral display of a 28 minute recording? Normally I would use a notch filter or capture a noise print, but as you can see, the frequency is not constant - it slowly falls from about 7.5 kHz to about 5.5 kHz over the course of the recording.In addition, every approx. 4.1 seconds there is a brief upward wiggle in frequency - see this zoomed in view:Any ideas of how to filter this out? It's not horribly loud, but it would be nice to get rid of it or reduce it. The recording is from a radio program (provided by the producer on an MD), and the content includes both musical segments and speaking.

Hello, I have audio files where I recorded only on the left channel. Due to some error with the camera or the cable, there is a specific hiss noise in intervals and some other more silent noise. I noticed that you can clearly see the noise in the right channel sine that one should be empty. My question is can I tell Audition somehow to "take what exists in the right channel and extract exactly the same thing in the left channel"? 

 Our band recorded several songs in one session on a Zoom L-20 LiveTrak recorder/mixer (See above).  Unfortunately, the "engineer" running the Zoom failed to input proper metadata (bit rate, Hz, etc) and just started and stopped each song to slate it, but then proceeded to record the next song "as is." My questions are: Since I saved the Zoom folder to my PC, when I click on it the files appear separately as shown above. What's the best way to import them into AA version 22.1 so we can eventually separate each song and mix and master them properly?As you can see from the screen grab, our 5-piece band each have a mono "mic" track and two separate instrument tracks (piano is stereo, e-drums are stereo, etc), for a total of 3-tracks each = 15 tracks in all. If you click on any of the individual 15 tracks ("bob" for example), the recording goes on for about 2 hours of continuous audio, one song after the other.When I went to AA site, it said to import the files "raw", which

Hi all,Has anyone found a way to help remove breath noises in audition? When I record videos, I have a lot of breath noises, which my asthma makes even worse. I know natural speech has some breaths, but these are loud and there are wayyyy too many of them. I have tried using plugins like the debreather, but it didn't work for me. I tried noise gates, but that wasn't working well because it cut off some parts of some works, but since the latest update it's even worse. Even with the autogate threshold set at -60db, it's cutting off words while missing the breaths. Using autoheal to do them individually takes a long time (hours to get through 10-15 minute clip). I need something more efficient. Any help would be greatly appreciated. Thanks

I wish to remix a bunch of music clips and then increase the duration of all of them to the same length. Is there a way to record a favourite for this so that I can batch process them?Each time I try this by creating a multitrack mixdown and doing it on one clip, when I stop recording the favourite it gives a "nothing recorded" error.

I am working on a multitrack file. It's got one stereo piano track and 4 vocal tracks (mono) in it. I can adjust the pan for any single voice for the whole duration in wither the mixer or the track controls. But I cannot see the blue line of rht pan envelope!The volume envelops is working fine and the Show Clip Pan Envelopes is checked in the view menu. I am having this problem in Audition 10 on an old Mac desktop and in 13 on my Macbook.Any help getting the blue envelope line to show would be MUCH appreciated.

Suddenly hitting space bar highlights curson on wave file and locks the program. I have backed windows 10 up to a few days earlier, un-installed and re-installed Audition, re-staarted several times and updated Qdobe and Windows 10. Still no joy. I can edit files and so on but no play or record. Help please

Hi there, I have been editing a podcast and have produced several episodes with no issues so far, however today when I saved my session, suddenly all of my files are showing up as "Offline" and the wave points are gone, I cannot playback or edit my session.  I googled and it seems like it could be something to do with storage space? But I am saving to an external hard-drive that is 2TB, and it's telling me I have 1.97TB of space left, so I'm not sure what's happening? You can see that I have cut and worked on this quite a bit and I'm trying to avoid having to start completely over in a new session. Is there a way to recover these files so that I can keep editing on the same track? I'm not sure what happened here! Any help appreciated, thank you!! 

I'd like to report a huge bug...  Opened a project to find that all the media had been offline and so when I linked it back up, I noticed that all my keyframes/edits to volume were lost in the multitrack session. I have audio that is 1+ hours long and would really hate to have to RE-EDIT the entire thing.. Images for reference:Offline Media:After Linking Audio: 

Hello! I need to update an older Audition file and see that some of the media is offline. It involved a single track that was spliced into many small segements to clean it the voiceovers, etc. When I relinked it, it just linked the media with it starting at the beginning and running across all of the spliced clips therefor all of the edits are gone, despite the media still being broken intochunks. Please say there is a way around this so that I don't have to spend innumerable hours starting from scartch... Screen shots attached, you'll see the gaps of silences that are there now, etc. (I have Audition CS6. I know, I know.)Thank you!

I have been given about a couple of dozen cassette tapes recorded probably 20 plus years ago. These were recordings of the village memories of elderly residents, now all deceased.Unfortunately the person recording them made a number of basic mistakes - speakers too far far from microphone, wrong recording levels, and so forth. The poor quality of the recordings have been made worse I think by print through as the tapes spools have been in the same position for all thse years.For my part, I have to say that I am very much a novice when it comes to use Audition, so that doesn't help.I am sure there are professionals out there who could improve the quality of the sound, but the village history group does not have the funds.Any pointers you can give me that would help me tackle the problem would be gratefully received.I have attached a brief sample. 

Hi All, I hope it's ok to ask here? I have a .sesx multitrack file in Audition CS6 that contains my backing tracks for a showband I play in. The file is essentially two hours long, and has about 30 songs. Each of the 30 songs is mixed perfectly in gain and output volume, but each song is slightly different output volume to each other, so I find it hard to mix the band whilst we play live with this slightly inconsistent output volume.  There are about 400 individual audio files spread across the 16 different tracks that make up the 30 songs. Could anyone please suggest a simple solution to make all 30 songs output the same -6Db level so I can set and forget? Or is the best solution really just a painful session with headphones on, and attempt to balance all 30 songs by guesswork? I run the Macbook audio out via USB to a stereo USB input channel in the mixer, and just use the Adobe .sesx file multitracked as is, so I can flick things on and off if needed with differen

I have been trying to create an  audio CD for the car player and all is fine except for one small convenience matter.  I was expecting to be able to see track information.  After several hours of searching and some experimenting I write to the forum for some guidance or other ideas that might help me understand my failure so far.  One experiment I did was to take two commercially produced audio CD's and insert them into my car's CD player.  One displayed and the other did not.  Taking the one that works to my PC and using Windows Media player or Audition, the track information did not appear but after I used "Update Album Information" the fields populated. So I will be able to report the outcome once I try to take the ripped audio to burn a CD for the car.  But all my efforts so far have me baffled.  The Windows metadata fields all are populated yet no success when I play the CD in the car.  Has anyone had similar challenges?  

I purchased Premier Elements 12 some years ago and due to work commitments didn't have time to use it.  I have just started copying some old VHS stuff, mostly old anaglog camera stuff, onto DVD so that I can edit and save as MP4.   Not too challenging to import the DVD files into Elements, but saving as a MP3 file, which the brocure says it works with seems imposible.  I was thining of upgrading to the Premier Elements 2022 vesrion, but would rather spend my money elsewhere if it is not going to be possible to save the edited DVD video file as an MP4.  Can anyone advise if this is possible with the 2022 version please.

Hi Everyone,I am fairly new to Audition but feel like I have gotten a handle on things. I recently was editing my podcast on two separate wav files in the multitrack. I have been going back and forth with the wave form editing as well and removing noises. After saving it last time, 2 days ago, I tried opening it today to get "Error: Corrupt Files: not a valid RIFF File" I have no idea what this means. When I try to open the file separately, I get "Error: Media Foundation reported an error when opening the file. Media Foundation returned error 0x80070002" I can seem to find any answers for that error either. I spent 3 days editing this file and hope someone can help me figure this out. I would greatly appreciate any help!

Any way to open .ses files as cannot access my pc with audition installed

Hi People, I am hoping I can use my Intensity Chuttle to record old audio recordings by recording directly into Audition. I've set Audtiontion up so it has the Shuttle as its audio hardware, but no signal is being seen by Audition. I checked the Audio Midi Setup and while the Shulttle is present, the level controls are not accessible - they're greyed out. They appear to be set to 0. I can record audio through Premiere Pro and Blakc magic's Media Exprss, but I would prefer to go through Audition. I should note that audio is present in both Premiere Pro and Media Express when recording video, and in when I disconnect the video cable to the shuttle. So it appears to be an audition issue.. I've attached images from Audio Midi setup to show where I think the problem lies. Has anyone been successfull in this? MacBook Pro 2019MacOS MontereyAudition  2021

How do you keyframe the audio effects and other things like AE?  The 5.1 tracker panner would be cool to keyframe.

I have a piece of audio which is very poor quality and I am doing my best to make it at least usable but I'm still way off the mark - It might not be possible but I wanted to ask and see if anyone had any advice or methods to help out. Here's a link to a clip from the talk before and after I attempted to clean it up. I mainly used the noise reduction and dynamics processing toolshttps://www.youtube.com/watch?v=EUzTYeJEpwc&feature=youtu.beI'm unsure exactly how it was recorded but it was in a very large room on what I am assuming is the camera's microphone. Any advice on whether this can be improved to a decent standard?Thanks

It remains an "I" on single track, though.  With the "+" cursor in multitrack we can't split tracks, etc.  Anyone know how to reslove this issue?  Thanks!!!

Hi everyone,I've been editing a short film in Audition that was set up as a 32 bit/48khz stereo multitrack that was imported through a .xml. I've been editing in stereo, no changes to audio hardware or channel mapping, and have used both track and clip pans in the last week. I left it for a few days and opened it up to do a final pass and noticed that it's now a mono session with only the clips that I've panned individually showing the pan keyframes. All the track pans have disappeared. I've made a copy (through windows explorer) of the .sesx file and opened it in notepad, and both the session and the master track are stereo.When I play the section with the individually panned clips, the meters show that each output channel are panning, but the options to change on other clips and the tracks aren’t there. All my bus tracks were setup stereo, as were majority of the tracks. I've also screenshots of the master track, a section of clips that have been individually panned, and th

I want to access the data in AWS s3 from adobe audition directly.Is it possible?