Questions

I have a USB microphone.  My operating system is Windows 10.. My Adobe Audition is Version 1.  It will not recognise my microphone and I have the same problem with Audacity.Has anyone any ideas as to how to correct this please?

I know that Audition has the Sound Remover tool and you can train it on specific sounds and there is even a preset for "Remove Ahh and Umm". However, when I am editing an interview and when I try to use the preset, it removes basically nothing. If I train it on an instance of the speaker saying "Umm", it'll remove that specific instance and no others. Am I doing something wrong? I'm already paying for Audition, I'd rather not have to spring for Descript or some other tool in addition.

Hey so I sent a sequence from Premier to audition to apply some auto ducking. The problem I am having is when I adjust the "reduce by", the ducking is only working on one channel, so the left sides volume is going up and down the the right side is not being affected. Any ideas?

Having issues with exporting mixdowns from audition back to Premier.   Mix sounds fine in audition but on export each time the mix is coming back out of phase. See screen grab & I have pulled a short clip out.   Any ideas what might be causing this? Not had this issue before, no idea what is going on. going to run updates & ususal house keeping.   thanks for any help.  

Hi! I have some multichannel broadcast wav files (6 channel, 8 channel). They are actually multichannel music, but not being used as 5.1 or 7.1 tracks. Is there a way to mix the indivdual channel levels, instead of the level of the whole multichannel track? i.e. be able to pull up or down the indivual channels in the 6 or 8 channel track? I know I could extract them into 6 or 8 mono files, mix them that way, and then rejoin them and export it as a multichannel track, but... I prefer to do it this way for editing purposes (making it simpler to edit one track instead of 6 or 8 tracks, for a number of other reasons.) Thanks!

I just updated to v22 from 14 and none of my pref/keyboard commands/plug-ins etc. carried over.  How do I copy these to the new version?

Hello, I've just installed Audition and Audition Beta on a new Windows 10 desktop, and although I've been to: C:\Users\'Username'\AppData\Roaming\Adobe\Audition [or Audition (Beta)]\  ...on my old computer and copied the relevant folders and then pasted them into the directory on the new computer, the only thing that seems to have migrated over is my custom workspace. None of my presets are there, none of my favorites are there, and none of my keyboard shortcuts are there. Am I missing something? Surely there is a way to move all those things over when I install Audition on a new machine? Thanks,Brian

  Welcome to Adobe MAX 2021!October 26-28 Register Here. It's free! MAX FAQ: Find out more. See what you can learn. MAX Sessions: Pick from a huge variety of digital video & audio courses. Join our contest and WIN a subscription to Creative Cloud. Details here! Unified version numbers with Audition 2021 (v 22.0) There is one important feature in the new version of Adobe Audition along with numerous fixes you should be aware of. Check out the full documentation here! Unified Version Numbers: With this release, Adobe video and audio applications are aligned on version 22.0, making it easier for you to keep track of updates and ensure compatibility across the applications. More info here.       Adobe Audition Beta Get access to all the latest features designed by the Audition team and have the ability to provide feedback. Refer to this link to know more about it or watch the following video.   What's fixed? Incorrect 3rd party eff

Well, it never stops lagging!Not when I'm recording audio, and especially not when I'm editing Audio with Video. It never stops! I can't get rid of it! I did anything I could! I have NVIDIA graphic card, Intel i7 9th core, 16GB RAM...Why the hell is this happening? What the hell I can do?! I can't work like that!

My 30' session [radio programme] comprises 30 clips on 6 tracks, roughly. I get no audio or level metering (track or master) when playing a session. Same if I open one of the clips alone in Waveform. This is a session from a backup folder, created by Audition. Other sessions in that folder of this programme are the same, but sessions in the same folder for other programmes are normal. If I add a clip to one of the tracks, that plays [audio and level metering]. Muting and soloing tracks makes no difference. I also selected all clips, muted, then un-muted - no change. This has me stumped. Any ideas, please?

1) Question 1: PanningI have imported sound (32 bit float, 96khz) and all is good.Created a Bus, all good.But for some reason I cannot pan the individual tracks. Each track is on "default stereo input", is that wrong? 2) Question 2How do I view the track main window on top and view the mixer window in the lower area? 2) Question 2: 96khz on macbookproIf I restart my computer I can usually get the default mac output to play 96khz, but is there an easier way to default there? Also is there a way to hear 96khzwith headphone on a macbookpro.  Thanks for putting up with beginner questions.Bill G

Any advice on breaking a long multitrack project into gapless stereo tracks for streaming - with no clicks or pops on transitions. Do I need to use markers to define the split points? If so, how does exporting work? Thanks

First Man Landing This is how it sound like as example the people talking, is it possible to make this?

Hi there,I've recently bought a Rode Complete Studio Kit that includes the AI-1 Interface. While it has excellent preamps and works well using MME and WASAPI drivers, on my fully updated Windows 10 (20H2) machine, Rode's ASIO drivers do only work at a Sample Rate of 48000 Hz in Audition. As soon as I change the Sample Rate to any other value, Audition tells me that the "device could not be opened".The error occurs in Audition 13.0.13, 14.0 and the current Beta version – it occurs regardless of whether I check "Use machine-specific device defaults" and if I attempt to force the hardware to the document's Sample Rate, I end up with the driver running at 48000 Hz anyway (with no audio being recorded above 24 kHz, even though it should, had forcing the hardware actually succeded). The Sample Rate settings in Windows for input and playback devices do not affect the error at all. It's also worth noting that the exact same thing happens if I try the same settings in Adobe Premiere, which I as

Running into a very strange problem. In the waveform view of an mp3 file, I'm seeing a section of peaked audio -- amplitude statistics are below.  My sound engineer client, who created the file in ProTools, says that there's a hard limit at -4 dB and it's not possible for there to be clipping. Is there a setting for the Audition meters that I'm not seeing? Are files getting imported with a volume boost somehow? I've pushed back on this twice already and I want to make sure all my bases are covered before I hit send a third time.

In Audition, I have been recording narration for a year. I have changed no settings and now when I record, the playback has a delay that I can't get rid of... Any thoughts?

There should be a way to copy & paste keyframes in Audition.I have a revised music track but the rest of the audio is the same. I'd like to copy the volume keyframes from the old music track to the revised track, as the dips will all remain the same for the revised track, rather than doing all the work all over again.'Seems like this should be a simple copy/paste attributes but I can't find any option to do that.Am I missing something somewhere?I'm using Audition CC Build 11.1.0.184On a mid-2014 MacBook Pro running High Sierra 10.13.3Note:  I'm cross posting this to Audition CS5.5, CS6 & CC.Thanks!~ART~

HelloI am having trouble getting adobe Auction 3.0 to start. It has been fine working previously for years now, but starting getting stuck on Friday.The software launches, but it gets stuck on 'initializing required application components'.On Friday, I updated my Nvidia card with the latest drivers. I also used shadowplay for the first time. I think this is what might have caused the problem (audition was fine before). I thought it was maybe because shadowplay was accessing the mic, but even when I deactivate the mic in shaowplay, audition still won't start.It is worth mentioning  that another software, Replay Media Capture, also started doing the same thing at the same time.Does anyone have any suggestions on how to fix this?

Whenever I try and import and MP4 file to open its audio track, the program freezes and eventually crashes if I try and click anywhere (Not Responding). I need to be able to open the videos in order to create VTT subtitle files precisely.

Hello, everyone! I've used Audacity for years and it has met my needs up until now. I have an issue I'm trying to resolve and I cannot find a way to do it with Audacity. I have acutally never used Audition, and do not know if Audition can possibly help, but I thought I reach out and ask. Here is my issue: I need to remove the sound of bubbles which can be heard playing when this song begins. Unfortuntately, the bubble sound plays over the very first part of the song, so I can't just crop the sound.  Is there a way to tell Audition to look for a specific sound (such as the bubbles playing) and instruct it to seek that sound out and remove it? Let me know if you need me to clarify, and thanks ahead of time for any advice you may have.  

Thanks in advance for anyone's advice. I've been producing a podcast for a while now, but recently, one of my audio tracks are not playing. It's the yellow track that is not playing. It doesn't play even if I jack the dbs all the way up. Everything else plays. I'm kind of an audition noob, but I'm learning.  

In the latest Audition CC 2017 I use:Diagnostics -> Delete Silence - > Preset "Trim Long Silen Pauses". I scan - it finds all the pauses as expected.But no matter what I do It will always REMOVE all the long silent pauses instead of just trimming.Am I misunderstanding the "Settings" that say "Fix by Shortening Silence 100 ms" ? (can be set to any amount of ms)In a audio file that consists of speak It makes no sence to remove the long pauses completely.

In the insert mode recording, markers from the previously recorded sound, do not move and are always locked to the timeline.

Sorry, it's probably a trivial question for you but a big deal for me. Building an FFT filter, how can I expand the dynamics of frequencies (to start at 1Hz) and dB (+45, -45)? I only see a panel with a fixed frequency value 20 Hz and sound level+ 12 dB ...Thanks in advance 

I often use the Spectral Display to single out noises, and fix them.For no reason, Adobe Audition 2021 - 14.4.0.38, just decided that even though I draw a box around the low frequencies, it plays the entire spectrum and ignores my selcetion. The in and out points of the box still work as the loop feature works... Did I press a key or toggle something off? I can't find ANYTHING and it has rendered the software almost useless to me.How do I get it to listen to my selection and play just that? It ALWAYS used to, and every video guide I see has it working without issue.