Questions

When I am in edit mode the audio plays fine and we can hear everything, Problem comes in when we head into multitrack, we can't hear anything, audio card is working and no audio playback device works, any help would be nice.

Hello! I have seen many posts surrounding around the Blue Yeti Mic not working in multitrack, and after attempting to fix and tinker all the settings in my audio hardware, it will still not record audio. I'm current on PC. I have set up the audio channel mapping and audio hardware setting correctly, and also made sure my mic and output settings was compatible. In the track, it shows that my mic is picking up levels, but when I go to record my voice, it suddenly does not pick up any wavelengths or levels anymore, even with the R button active. I have tried (almost) everything to try and fix this problem, but whatever I try, nothing works. I have tried recording my audio in waveform, and it picks up my audio fine, but nothing happens once I make the switch over to multitrack. If anyone could provide any assistance, that would be greatly appreciated.

Quick bit of context: I edit a weekly podcast, which is recorded over Zoom. I get guests to record themselves using their phone's voice memo app, and take a recording of the Zoom audio as backup. Sometimes they can't/don't send over their voice memo until the very last minute, leaving me working to a very tight deadline. I'm wondering whether in cases like this it would be possible for me to edit the lower quality Zoom audio in the multitrack editor so that the work is done, then if/when the higher quality voice memo audio comes through, have audition essentially replace the Zoom audio with the voice memo audio, with all the edits? Similar to how you can work with a watermarked image in After Effects, then drag and drop to replace this with the full version, while keeping all edited attributes the same. Any idea if this is possible?

Hello!I digitalised an old recording from a reel to reel tape and recognised that a speech on it has a bit high tone and sounds unnatural. I tested different options on "Stretch and Pitch" and finally found something that is quite OK (104% and -1.5 semitones). The length of the speech is 53 minutes and when I applied, it shows 26 minutes to complete whereas my CPU usage is only 13%. I see that it uses only one core out of six. The information of the CPU is this (CPU bought 3 years ago): AMD Ryzen 5 1600X Six-Core ProcessorBase speed: 3,60 GHz, Sockets: 1, Cores: 6, Logical processors: 12, Virtualisation: EnabledL1 cache: 576 KB, L2 cache: 3,0 MB, L3 cache: 16,0 MBUtilisation 13%, Speed 3,67 GHz, Up time 17:11:28:23Processes 327, Threads 4141, Handles 163909 Memory: 16 GB, used 12 GB. It could actually work six times faster if it would use all the CPU's but why it doesn't use them? My Audition is version 14.0.0.36. The affinity of audition.exe has not been chang

When I try through Audio Hardware all I see is Microphone aray intel smart sound technology intell sst, I get the same In Premiere but at least it will record a voiceover. I read some of the old post here and moved the microphone to another USB and made sure the setting in Windows allows all apps. How can I make this work? ThanksArt

Does adobe have the ability to CUT and then PASTE TO NEW FILE...all at once?  I see CUT and I see Paste to New File, but not in one motion,   Can that be edited to a keyboard shortcut?    Or a Macro/Favorite or something?  Thanks

Hi,Im new here so i apologise if this is the wrong area and i also apologise if I'm missing info as im new to using auditon as wellI'm using audition to edit 2 . Wav files that were created in Garage band (attached samples) and when they are used in GB they sound fine.In  auditon they both sound fine individually, but when I add them to multitrack the first tracks end up sounding echoey and hollow while track 2 remains fine.There is spillover in each microphone where both mics are picking up each speaker, im not sure if this is a problem.  I tried using noise remover to reduce and spill over but it doesnt seem to matter?Any help would be greatly appreciated 🙂

Hello again!Once again I did try to find an answer before posting and couldn't find an one, so hoping to rely once again on the fabulous brains that reside here! Okay...I have a 30 minute drama podcast. I would like to create a separate Audition multitrack session/project for each scene so I can work it to death without getting all tangled up in a 30 minute timeline.Once I get all 8 scenes edited, each in their own Audition multitrack session, I would then need to combine them along with the opening and closing sesx into one master session.How do I stitch together multiple sesx files into one uber session?Thank you a huge ton in advance!!!!!Aimee

One question... How the heck do you get the "Loop" button to work when recording? I've searched the Knowledge Base and Forums, can't get a strait answer. I'm tracking drums to a scratch track/clip in the Audition timeline. I'm listening to that while recording 10 tracks made up of my drum microphones. Everything works great, EXCEPT, I have to stop after each take to restart the recording for each take. I lust want it to play back the song over and over again while recording a new Take on each pass. HOW???

Why does the computer reboot after the Adobe audition? And tell me how to solve it.

I don't know what happened. Slip of the mouse? When I want to save an audio file as .fla in Audition 3.01, somehow the filetype .zip has become one of the choices under FLAC. So I must type in the filename .fla as the name, or the software will save it as "filename.zip". How can I remove .zip as one of the choices of format in which to save a .wav (or other) file? I have to do this now for every file I want to save as FLAC. No need to emphasize how frustrating this is. In answer to your questions about why I'm still using Version 3, it's because so many of the functions I use every day have been removed from later versions. Thanks in advance.

I downloaded 2020 free trial.My inserted Wav plays incorrectly in both edit view and multitrack view. The file has same sample rate as Audition ( 44,1 khz)It sounds like pitch shift. What am I doing wrong? I am old Audition user since Cool Edit 1,0 another question:is it any way to convert my old Ses files ( AA3,0) to sesx files?  

I have edited my podcast and want to export it as either a .wav or .mp3 file. However, everytime I go to export it, it will not show up in the folder I sent it to save in Finder. I export it using these steps: Export>Multitrack Mixdown > Entire Session. When I press "OK" a file will not pop up automatically, nor when I got to Finder can I find any export file from Audition. I'm not really sure what else I can do. I have enough storage. I have restarted my computer. My software has been updated to Big Sur. I also have the most updated version of Audition. Any recommednation is appreciated :). 

When we run a clip out of Premiere and into Audition, the clip's timecode gets changed by around 50 seconds.  How can we keep the timecode the same going into Audition and coming out of Audition?  Because if we are doing a bunch of edits cutting parts of our that clip in Premiere, and say we accidentally bump the audio, we want to be able to use the timecode to line it back up with the video.Thanks

Looking to improve a recording  that varies speed throughout. Is there anything that can be done to even out talking speed to 150-160 wpm?

So, is Adobe ever going to fix this issue that requires me to jump through hoops to get normal playback everytime my computer updates? I'm using an iMac and after nearly every update my audio in Adobe sounds fluttered. That means I have to go in, close every Adobe program and extension and then rename my Audition folders. To top it off, it wipes out all of my presets, shortcuts, and plug ins. This is beyond frustrating. I've used Audition since it was Cool Edit and would really like to continue to use it, but I'm about at the end of my rope with these issues!

I have some 3-track recordings from a Tascam 144 cassette, recordings made in the 1980s (stereo soundtrack on Tr1-2, commentary on Tr3). They are Wave files. When I open the recording, all three tracks appear, but only the top two are audible. What I've had to do is extract the tracks to mono files, open in Multitrack, pan and so on. But is there an easier way in Waveform mode just to hear the tracks as they were originally: Tr1 and Tr2 in stereo, Tr3 in the centre? Attached is an extract.

Hi, Folks -What Windows tablet is recommended for Audition?  I'm looking for an inexpensive tablet to take on the road to record voiceover auditions...

Hi, I started with Audition 13 2-3 months ago, thanks to a friend. To keep the audio latency down, I used to adjust the buffer size in "Edit => Preferences => Audio Hardware". Now I can't find it anymore because of the newest version. There is something to adjust the Latency but it doesn't help much, even when I put it into 30 ms. I can't record myself without a big latency that really bugs me. Can somebody help me, please? 

I encoundtered a CD burning error with the Audition 14.0 update.I am posting this here to hopefully learn when the issue is correected.  With the help of an Adobe agent I installed the prior version and shut off auto-updates.  Thank you community! Paul

Does a possibility of using the old codec/filters for m4a-audiofiles do exist, if you do not develope your own mp4 filter (read/write). The mpeg 4-audio format is very good audio format. The sound is very good and the file size incredibly small. I can open m4a-files, because Audition interprets them as m2a or mpeg 2 AAC-audiofiles, if and only if a file have no specifications at all, but I could not write m4a-files. Does a possibility exist to make that possible? Best regards Bernd König

Since last week  my Audition has started crashing,  mostly at the end of a session where I have the client on zoom but now also just while im recording on my own. I am a voice actor and twice in the last week I finished the session and it froze and I had to force quit. When I reopened and recovered the files the last few seconds off of every take was either silence or weirdly had pulled audio from a completely different file. Today I had a live session and thankfully decided to export a copy at the second to last take. Sure enough at the end of the last take it froze, I was SO grateful I had already exported and saved myself about an hour of additional unnecessary work! Now its freezing while not on zoom...  this might be the log data you were referring to...  I'm not sure SessionID=6c80e536-f83c-4210-8271-53fa70e34a49.1618587700471 Timestamp=2021-04-16T11:41:40:471-0400 ThreadID=961939 Component=ngl-lib_NglAppLib Description="-------- Initializing session logs

Anyone else having issues with today's so-called "update?" Used the app this morning for several hours. No problem. As soon as Adobe forced this new rev I can't keep the app working for more than a couple of minutes before it crashes. Usually without saving changes. This (or similar issues) seems to happen every single time Audition is "updated." Of course, there's no support to speak of. How much am I paying for this? Unbelievable.

Hi. I'm a new Audition user, so I'm not familiar with many of the features / specific terms. I edited a 20 minute podcast episode in Audition, which worked great. Seemingly randomly as I'm editing, though, specific clips will become distorted and start sounding echoey and odd. They're always clips of narration that have been pitch-shifted down a couple semitones, but it isn't the same clips each time. If I go back and play the distorted clip over again, or if I remove and replace identical the audio (with all the same effects on it), it solves the problem for that clip but then another will spontaneously distort. I thought it was just a rendering problem but it persists when exported as .WAV and .mp3. I can export the audio three times in a row with the same settings and different clips will be affected. It's incredibly frustrating and I don't know what to do!

How to cut the sounds which are all below -30db level in a conversation record file?