Questions

Frequency analysis was performed with the following Python code.  def GetFreq(wav_file_path, start_sec, end_sec, N): overlap_pt = N//2 #50% overlap #read wav file ir, fs = sf.read(wav_file_path) st_sample = int(start_sec*fs) ed_sample = int(end_sec*fs) frame_num = (ed_sample - st_sample) // overlap_pt - 1 #window window = np.blackman(N) acf = 1/(sum(window)/N) FFT_result_dB = np.zeros((0, N//2+1)) for i in range(frame_num): FFT_result_dB = np.append(FFT_result_dB, np.zeros((1, N//2+1)), axis=0) st = st_sample+i*overlap_pt ed = st+N #windowed x_windowed = ir[st:ed]*window #FFT F = np.fft.fft(x_windowed) F = F * (2.0 / N) #Normalization F = F * acf F_abs_amp = np.abs(F) F_abs_amp_dB = 20.0 * np.log10(F_abs_amp + 1.0e-10) FFT_result_dB[i] = F_abs_amp_dB[:N//2+1] #Averaging fft_out = np.average(FFT_result_

I got an update yesterday, and now the Effects > Special > Vocal Enhancer > Female (and Male) are broken. How do I fix it? Also, I will be recording and the pitch will randomly change, as if there was a birtrate mismatch. Sometimes it occurs in a single file, sometimes it happens when I close one file and open another. Rebooting the computer fixes this, but there has to be a better way. 

How do I make it so that new files that are created from existing file that I have already named also have the same name with the new file type default name appended to them? For example, I create the file(s) in a multitrack session and when I initiate this process I name it something unique like Recording12345. From this session I have to work with individual tracks or "bounced clips" (not sure what the difference is or what bounce means but that's a minor concern) and in order to do so Audition will create the new file(s) called Track_001.wav, Track_002.wav, Bounce_001.wav, etc.  How do I get it to automatically name the files by appending the new file type name to the end of the original file name? So a new file from that session would automatically be named Recording12345_Track_001.wav. Whenever I go back to save the files its very confusing, if I experience a frequent crash its harder to recover files, and if I have more than one session open the files almost b

hello, I just got the shure mv88+ and set it up and it works pretty great on the waveform editor however I tried to use it on the multitrack editor but it's not working. 

I have a sketch show I am making. It requires cutting different pieces out of each take and then combining them together on one track to make a continuous performance. The problem I have is when I want to do post effects I'm told I need to do it in the waveform view, but when I go to the waveform it takes me to each individual waveform for each individual track as opposed to a waveform from the combined tracks on the mulitrack view. How do I get the mulitrack channel to become a new separate waveform so I can then edit/add effects without having to mess with all the sperate tracks waveforms?

Hello, since I installed the latest version of Audition, 14.1.0.43, when I go recording diving audios in the same directory, in the Audition Explorer, it is not updated automatically, I have to return back and recharge, before if you did it. ... happens to you? 

Hi! This just started (on Audition 13.x, can't find what exactly it was) and I tried to solve by restaring and upgrading Audition to 14.1--  but still have the same issue. When I stop playback, using Spacebar, the playhead stops and then jumps forward about 5-10ms... barely noticeable but of course when you stop you want to stop... is it trying to do me a favour with some fancy setting here, or is it a bug, and how do I stop it? I've been using Audition for as long as I can remember (on this system and my 11-year-old iMac) without noticing this before. Any advice, cheers. I've also tried playing with the Playback settings, it doesn't seem to be related to the "return playhead" issue, which is all that comes up when trying to google this issue. On Macbook 2019 2.6GHz i7 16Gb OS11.2.3  and Audition up to date 14.1.

My multitrack session suddenly stopped playing some of the track in the timeline. If I single them out they all play fine as they had in the past. But now all the tracks will not play together. All the files are on my internal drive. It seems a glitch... I started with shift key down to reset hoping that would do but nothing.Can some one help me? Thank you.

I get the message "Audition encountered a problem trying to perform the operation" when trying to save a multitrack project. My OS is Windows 10

I have Windows 10 voices that do not show in audition voice generator. Example: Australian English. How do I load them?

I have deleted both the computer version and my online account of dropbox, I have also deleted the synced folders and yet Audition does not allow me to save to anything but DropBox. Please help as this has made Audition basically unusable. 

Hi all I have Audition CS6. I have put together some CDRs that I burnt containing 70s music. When I played them back I found there was volume inconsistencies from track to track. I realise a perfect volume level within different mixes ranging frm quiet ballads to loud rock isn't really possible but is there something that Audition that can help with my dilemma? Can I also add that if there is something that can help is it doesn't affect the original sound of the song. Thanks.  

I am using a Behringer FCA1616 with Audition. For audio hardware, "FCA1616 USB ASIO x64" is selected. On multi-track, I can click the R for recording, but then when I click on the record button the transport does not move. The record button shows it is activated. I can move the transport manually. Thanks 

Hello to everyone. A while ago I installed the latest version of Adobe Audition. However, I cannot find a solution to something I have done recently. How I did I scrambled the entire menu of the program and now I don't remember what and where. For this I want to reset the program settings but I don't know how to do it. Someone please help me. Pleaseeeeee

I just upgraded from 3.0 to the current Adobe Audition.In 3.0, when you were opening or saving, you could see recent folders that you accessed by clicking on the drop down menu at the top. Now, it only shows the current folder you are in. Is there anything that can be done so that recent folders show up in the drop down?Thank You!

My Zoom H5 multi track function has stopped working in adobe audition. The input selections dont appear. When I set the ZOOM H5 to stereo, it works fine, but the multi track function doesnt work. I have uninstalled the asio drivers numerous times and update the zoom firmware, but no result.

I have lately been experiencing dropped samples when I do my voice recording.  I get the Detected Dropped Samples message in the bottom right corner of my screen.  I am by no means a computer genius or an expert at this particular app.  All I know is that I need this problem to go away. Can someone help me, and explain how I can fix it? 

Audition 13.0.9.41 & 13.0.10.32macOS 10.15.7 Pressing CMD+S to save the current file in the Waveform editor does not save the file. A small progress indicator appears and seems to progress, but the Files panel and document tab still display an asterisk after the filename. Morever, attempting to close the file or quit Audition immediately after "saving" with CMD+S prompts the user to save unsaved changes to the file.

Whenever I start up Audition, a tab which looks like the sign-in tab, keeps repeatedly opening and closing without ever properly loading. Whenever I try to close the tab, my app crashes. I've tried uninstalling and reinstalling and even trying it on different computers to no success. Any help on this would be massively appreciated.

I am trying to make a pan envelope, however, the option does not appear where I know it should be. As far as I know, I'm working on a stereo session so I'm not sure what the issue is. Is there something I might have toggled off?

Hello dear community, I am exporting an 8min, 6 track project to OMF. It's quite a simple project, with no effects attached.As the computer is creating the OMF file this Warning comes up, and the process stops: Warning: Clip duration is longer then source!I saw online a mention that this might happen if a file has been time remapped. However, I am not aware of any such changes here, unless I have done something by accident.Can anyone assist me in narrowing down what the problem here might be?

Buen díaEl problema que tengo es que al momento de reproducir un archivo de audio el puntero de tiempo se congela y no reproduce el archivo.Desde hace ya dos meses tengo este problema en una institución educativa (SENA-Colombia). El problema surge tiempo después de trabajar con el programa porque al inicio funciona normalmente. Al principio me surgió el problema con equipos MAC y actualmente tengo el mismo inconveniente con PCs. No es un caso aislado ya que tengo 15 equipos MAC y 3 PC con este inconventiente y he probado reinstalando el programa, aplicando el Adobe Cleaner (Con el programa Adobe Premiere tuve el mismo inconveniente pero se solucionó con el adobe cleaner) y ninguna de estas dos opciones ha funcionado. Necesito ayuda urgente ya que con estos equipos los estudiantes aprenden a manejar la herramienta y la Institución pagó mucho dinero por las licencias como para que nos toque trabajar con software libre o revisar otras opciones. Muchas gracias por la atención y estoy atent

I read a post on here the other day about saving to MP3 without having to re-select the file type from wave to MP3 over and over and over again in the run of a workday. Well, I understand that many folks are concerned about quality etc. and don't save to MP3 because future edits degrade the quality even further & even further, there ARE workflows , like my own, where that's not even remotely an issue and saving to MP3 and the extra steps involved, Using the standard steps, is a royal pain in the patootie. The unsatisfying answer that was given to that post was "change your workflow" basically.  The answer had said that if you do control shift save, it will remember that you used MP3 last time and it will save us MP3 again.That is simply not true in my experience, not even remotely, nor was it true in the experience of the original poster, who was rightfully frustrated by the answer he got. unfortunately that answer came from a moderator and that moderator closed

I am recording this morning in the same way as I do every day and suddenly this happens, see photo. When I save the file and reopen it is fine and then the new recording goes the same way. Has anyone seen this before?

Hey All!Having an issue with the Levels window when recording and I've searched all over the place and can't seem to find a fix for this. Figured it would be best to reach out to the gurus in this forum. Here's the issue:Before the issue, everything was running smooth. I was able to preview my input level before recording in the Levels window in Multitrack view. I would send a signal, the LED would light up, I could make my adjustments to avoid clipping, and all was fine. About 2 days ago I went to record and noticed that my input signal wasn't registering in the Levels window. It's registering in the channel that I've armed for recording, but nothing is showing up in the Levels window. I did a test recording and sure enough, Audition was recording the input but nothing was showing up in the Levels window which makes it very difficult to monitor while recording. I stopped recording, checked all of my settings, inputs, external gear etc, and tried again. Same issue. I then double clicke