Questions

I am working with Audition CC2020 on an iMac.  I had all my files properly located on my local HD Documents folder.  But yesterday, trying to fix a sync issue with my calendar, I closed and restarted the iCloud.  I was marginally aware of the Mac iCloud app resetting itself but I was laser-focused on my Audition project.When I went to save a session, Audition came up with a warning -- "the folder no longer exists."  I checked, and sure enough -- no local documents folder.  Horrors.I realized that iCloud had relocated ALL my documents -- including my Adobe folder -- to the Cloud, where I know Audition cannot find it.    I have been here before.  I specifically set up my HD so that the local documents folder contained ONLY the Adobe folder -- which has grown quite large, filling up more than 300 gb of my 500gb internal HD.    Everything else I set for the Cloud to upload.  Now, it has grabbed my Adobe folder as well.I was able t

hi guys, I wonder if someone can help me out? I have a sound file of a cardiac monitor, going from normal beeps to a flatline, and I now need to change it to normal beeps into flatline and then back to recovery - normal beeps. i thought if I could invert the sounds, ie reverse it I could stitch both segments together to get a beep beep beep.. flatline.. beep beep beep sound which is what I am trying to achieve. However, I realise I dont know how to do this. any pointers would be massively appreciated... I am using audition on a Windows 11 Business machine, with 64 GB iof RAM. Audition version 25.0.0.47, the macghuine is fully patched, masnaged by our IT departmenrt.    Thanks Sanj

Hello everyone, im exporting some FLAC files and im having an issue. I have some distortion going on but its just when i use this format (i used WAV and MP3 for the same song and got no problems)Specificly the project is:-The song with the mastering chain (and limiter) in one track and-Intro/outro which is made of two tracks that goes to a bus, nothing of this goes further -9db.Everything, the song and the bus, goes to the mix chanel (everything in 0 here).Im working in a 48k 32float session. When i export  i use 44k1 32float plus FLAC 24bitWhen i export the song + the intro, you can see that in the first 5 seconds there are some peaks that are above 0db and i would understand the distortionNow if i export just the song without the intro the wave looks like this, nothing goes above 0 furthermore nothing goes -1 (i set the limiter of the song in -1db)Something very similar happens at the end of the song where the outro apears (is the same track as the intro) there are some peaks th

I've edited several song sessions. 100+ files. All of them make a click/popping noise at least once in the track. The click/pop is very loud. It sounds like a glitch/error. It ruins the track. Sometimes the spots of the clicks change. Meaning sometimes they export fine. Other times they happen on an entirely different location of the song. I've noticed I can fix some of them by declipping even if the vocal isn't clipping. Same with using a limiter. Is there a reason for these clicks/pops? The files aren't coming anywhere close to red/clipping.But they sound like very tiny spikes of clipping.  Are there solutions to this problem?

I get it that mastering Adobe Audition is a steep and long learning curve - but nothing is more confusing and frustrating than conflicting / contradictory advice from experts on the same issue.1. Device Class: MME or ASIO?Adobe Audition online Manual strongly recommends ASIO for Windows.  Then on this and other forums I have seen advice to the contrary - forget ASIO use MME only - for a number of technical issues with ASIO. I have been using MME from the start, but when changed to ASIO just to see what happens, it asked me to open the external settings - which apparently I don't have on my computer. Is this something I need to download and install l first?  I am more concerned by the difference of opinion, by the way. 2. Input and output:  which one is recommended: System Default OR the speaker and mic I use?  Again, I have seen both recommendations excluding the other. yes, I can  of course try every possible combination and

I am relativly new the the Adobe Audition, but i'v been having 2 issues I can't seem to figure out. The first is when I import a video to "edit audio to video" it doesn't import the entire file, it's always missing a piece. I'v tried multiple time with the same file that is not corrupt and is only 9min long, yet every time it cuts it at a different part, it even cut a section from the beggining of the clip at one point.Besides that issue, when trying to edit the audio and watch the video at the same time, the video doesn't ctually play, if I pause and resume it will play for just 2seconds and freeze, so I can't actually check if the video and audio are lined up correctly. Has anyone had these issues before? or does someone know how to fix these issues?also I can't figure out how to export in Mono, all the tutorials ive watched don't work, I converted my track from stereo to mono on the waveform, but when exporting it only gives me the option of stereo

I edit podcasts on audition. When I use a wired mouse at my office I have zero issues. Ocassionally I edit from my laptop at home. My setup at home has a wireless mouse. This causes a weird function I cannot seem to get rid of. I select a track in the multitrack editor, then if my mouse is over the track, it momentairly makes my mouse cursor look like a double select tool. The arrows are slightly overlapped; one is black and one is white. If I click when the mouse is in this function it duplicates the track under itself. The issue I am having is that I do a lot of selecting of everything to the right and moving it to the left. If I click too quickly, I end up making a copy of the track and have to ctl+z. For the life of me I cannot find this tool anywhere or how to disable it. Any help would be amazing. 

I produce a daily show for Rick Dees and audition 25.0.0.47 started dropping out if I lower the volume too low when mixing, usually in the first few seconds. Like a skip.wav file(s) on timeline, manually lower volume rubber  band.Windows 11, Audition v25.0.0.47

I need to add an earrape effect to a small clip of the audio file I'm working on. does anyone know how I can do this? because there isn't much info on it that pertains to Audition specifically.

I'm new to working with Audition and I'm wondering how I can create a copy of a multitrack session.I want to create variations of the session but don't want to destroy it each time.In Premiere Pro and After effects , it's quite obvious on how to do this but I'm completely mystified on how to do this in Audition.Thanks for your assistance.J.

Hello everyone, im mastering an album wich is going to be a CD. All the song mixes and the project are in 48k 32float.Each song is in a different chanel with his own chain of mastering and everything goes to the Mix chanel which only have a Loudnessmeter.I noticed that when i set the limiter ceiling to -1db and then i look the loudnessmeter in the same chanel it shows me -1db, but if i look the loudnesmeter in the MIX chanel it shows me -4db, the same happens if i export that song and look the wave: it shows me -4db of peak and its quieter than the same song that im mastering. To avoid this i just add 3db in the IN of the MIX chanel which solve the problem. Its ok to do this or there is an option to configure Adobe so i can avoid this step? As i said this is gonna be a CD (44k,16b, WAV) so im going to use Dithering and i want to use the one included in the limiter of each song (Pro L2). My understand is that this process should be the very last step but, again, after the Limiter o

Here is the link：https://developer.adobe.com/console/3518920/servicesandapis/au every time I clicked download, i cannot reach the website.By the way, except the SDK, is there any other API that can control Adobe audition?After I searched a lot on the internet, it seems not, right? 

This is what I get now when trying to start audition.   [Mod: Branched from an exiting thread in Lightroom forum and moving to the Audition forum]  

What is the best way to level out a tone from a single bell strike? Clearly the level reduces over a pretty short period of time (about 10 seconds) to zero. But I need to use that tone for a full minute or longer. I tried cutting out (at the zero crossings) a fairly even section in the middle where the slope of level reduction was minimal. then I tried looping that in multitrack view. But even though it sounded totally smooth at the transitions when looping it with the repeat mode in edit view, when I looped it in multitrack, there was a noticable little high-pitched sound at the end/start points.  Is there a better way to do this? Maybe flatten out the tone level and extend it somehow? 

hey friends please i need help my cs6 version audition freezed like so !!! and turn all black screen 

So here is everything in my setup involving the mixer: https://drive.google.com/file/d/0B1Zga88U0PtJZEI0YjhCYTFFdlk/view?usp=sharingAnd here are my Audition settings: Audio Settings - Google Drive I'm admittedly a little novice at this and just trying to simply record my voice in Adobe Audition. I have Audition on the MME interface with USB Codec playback and recording.My computer isn't recognizing the sound at all. What am I doing wrong?

Hi there!First of all, sorry if you read anything weird, English is not my primary language.  I am trying to teach Audio Post Production to "Photography and Video" students. I profesionally work with Avid Protools for years, but they only have the Adobe Suite in the school, so we only have Audition to do Sound Post work right now.I am trying to replicate the "Location Recording--Premiere--Protools" workflow as much as I can, for example, we set up Protools shortcuts in Audion. But I am finding significant differences with Audition Workflow and I'm struggling to find answers using Adobe's official help (https://helpx.adobe.com/audition/user-guide.html) So, here's the thing so far:They recorded a 1 person interview using 1 camera and two microphones. Boom mic. went into Track 1 and Lavalier mic. went into Track 2 of the Zoom H6 recorder. They imported/sync everything in Adobe Premiere. So they have: Scratch Audio from camera (stereo), Boom mic and Lavalier Mic.They exporte

I’m trying to find out more information about what settings are saved by Audition when you save the application settings.  (See menu command File>Export>Application Settings.)Adobe’s own support pages state: “Application settings files store all current preferences, effect settings, and workspaces. Export and import these files to store groups of customized settings for specific workflows, or transfer favorite settings to another machine.”Does anyone know exactly what is covered by the export?  Workspaces are covered, but “Current preferences” is rather vague. For instance, are user keyboard shortcuts and user defined favorites saved?  What about user defined settings within effects, both native to Audition and third party plugins? Regards, Steve

I have Adobe Audition CS6 with a perpetual license. Lots of difficulty getting in installed (Windows 11) but through a chat with Adobe it did get installed and I have used it!! This was last week. Today Adobe Audition is NOT on the computer anymore. NOT listed in Installed Apps, NOT found in Program Files (or Program Files(x86) I've been using Windows since the '80s and have NEVER had a program just go away. I DID NOT uninstall it since I use it frequently. Any idea how this magic came about or what to do about it? (I didn't pick a good topic since "disappearing program" isn't a choice 🙂

Hi! Anyone managed to use all six channels of the Emagic EMI 2|6 under Win10? The last official driver from Emagic for that soundcard is for WinXP. And under Win10, I can only get "unofficial, generic" drivers from Microsoft. But when using these, I can only access the first two channels in Audition/VLC/whatever?! And there seems to be no ASIO-support?! Thanks and kind regards,Jörg

I can't figure out how to rename a file. Rename is grayed out. WTH am I to do with "Untitled 2?" I don't want to do this in Multitrack. I need this in Waveform. I'm creating various audio tones (or only attempting to at this point).

Pardon this nubie questions - Im on a Mac MiniM2, Behringer UMC204HD USB interface, Samsung large diaphram Mic, recording short segments of voice to audition. When I play back the track I am still hearing room noise via my live microphone. I can turn off the phantom power on the back of the Behringer USB interphase (to cut the mic), but on the UMC204HD the phamtom power is on a mechanical switchs in the back of the unit and seems crazy to be reaching back there every time I want to check a recording  - there must be a better solution.

Does stretching using "stretch and pitch" affect pitch? I want to stretch the clip without affecting pitch.

Hi,I have been interested recently in substantiating my skills and expertise using Audition by attempting to become an Adobe Certified Professional. It seems however that is it no longer possible to apply for an Audition qualification. I'm just wondering whether anyone could shed light on this; what's happened and why is this no longer available? Thanks for any insight