Questions

Kendi ufak çaplı bir çizgi film yapıyorum ve birden fazla karakter seslendirmem gerekiyor fakat adobe auditionda farklı bir ses yaptım ve kaydettim , efektler ile. Şimdi tekrar aynı karakteri seslendirme yaptım, fakat diğer dosyamdaki ses efektlerini bulamıyorum . Bu diğer dosyama eklediğim efektleri kolay yolda şuan ki projeme kopyalamamın kolay bir yolu yok mu ? Ne yaptıysam ilk dosyamdaki sesimi elde edemiyorum . Lütfen yardım edin.

Grüß euch! Ich bin neu bei Audition und habe mich jetzt ein paar Tage lang damit "herumgespielt". Gefällt mir eigentlich sehr gut und ich verwende es für unseren Podcast.  Eine Frage hätte ich jedoch. Wahrscheinlich bin ich einfach nur blöd um dahinterzukommen. Ich will bei einem Clip ein Fadeout bzw. Fadein nur bis oder ab einem gewissen Level machen. Das heißt, z.B. im Podcast die Hintergrundmusik, anfangs laut, aber während des Textes leise. Und da einfach einen Fadeout bis zur Lautstärke, die ich benötige. Am Ende des Textes dann wieder ein Fadein bis zur gewünschten Lautstärke.  Wie realisiere ich das in Audition? Danke schon im Voraus.  Gruß aus Graz 

Hi,In trying to salvage old stereo vinyls, I'm having a problem with the de-click process. After tayloring the process through the Click/Pop Eliminator window (see first screen shot), and applying it to the recording (FLAC files), I get a very satisfactory result for channel 2. Instead,  Channel 1 is left unchanged, as if no processing at all had been applied to it (see the second screen shot). Could anyone help me to understand what I'm doing wrong?Thanks,Paolo Viviani

I'm trying to convert/restore some old vinyls and I'm having a problem with the Click/Pop eliminator. I'm running Audition CC 2019, Mac OS Mojave 10.14.3. When I run the tool on a stereo recording, it does a great job of removing clicks and pops but only from the right channel. It does nothing for clicks and pops in the left channel. Here's the waveform before I run the tool:Here's the waveform after I run the tool:As you can see, it removes most of the obvious clicks and pops from the right (bottom) channel, but it does nothing for the left (top) channel. What am I doing wrong?

Why am I getting this error? It says that I'm missing  Rx 9 Voice De-noise but the plugin is not missing. 

Help! I just installed Adobe Audition. When I hit record, this is what happens. Computer is working great. Thank you,

When I exported audio from Premiere Pro to fix it after fixing the audio, I could not export the audio. Is there any solution for this? 

Hi, I am producing a podcast, and after 1 month of using Audition CC multitrack without any problems, I am now experiencing major problems.The problem starts when Audition freeze for a very long time, and I can not do anything with in the program. Then I get the message "Audition has encountered a error reading or writing to disk. We recomend you save and restart Audition". Even this message is freezed and I can not click on or save anything. Then I have to force the program to close. Every time I try to make changes in the program it freezes and the exact same problem occurs with the same message. I am working on an ekstern harddisc with a lot of space, so that is not the problem either. I am now in a situation, where I nor can export anymore or save the file elsewhere than where it was stored on the harddisc.I managed to export the first 8 minutes and 8-18 minutes out of the 35 minutes (But i'm not even finished editing this) by selecting the two small bits and exporting them instead

I have tried all of the suggestions and it still will not play. Is there any new ideas that may be the reason why it will not play? My computer was made specifically for podcasting: 12th Gen Intel(R) Core(TM) i5-12600K 3.70 GHz with 64 bit operating system, Windows 11. Thanks in advance. It's driving me crazy that I have had this issue for weeks. Please help, I appreciate all suggestions. Thanks again!

I've been trying for an entire day to recover my project that I've been working on for months. When I open it, I get a pop-up that says my file is missing. When I try to link the media, it asks me to find a sound instead of the missing file. After relinking the sound, the multitrack session freezes the DAW and nothing plays back or loads. I've tried resetting Audition and reinstalling it, as well as reaching out to customer service, but nothing has worked. I've also searched online, but I only find Premiere Pro tutorials. However, everything works fine when I make a new session. Panicking like crazy cuz I don't know the problem. pictures are below to kind of explain what's happening  P.s it probably has to do with the sample rate because when I press play it says playing but it also says resampling to match the sample rate of 44100 though it's still not playing anything 

My audio device (TI ADC6140 eval board) presents 8 record channels (PDM mics), TDM-32.  Goldwave successfully records 8 channels, 32 bits.  Audition creates an 8 channel file, but only the first 2 channels show actual audio, other 6 channels are zero.Ideas?Thanks, Chris

I've recorded several voice over sessions.  They are .pkf files and they were saved to my external hard drive, not to a cloud or mydrive.  When attempting to open any of the project files, I get the following error message:Error: Media Foundation reported an error when opening the file.The byte stream type of the given URL is unsupported. What is the fix?

Very new to this world. Using an M-Audio M-Track Duo to record a podcast. An audio signal shows up when recording but when I try to play it back during editing, I can't get any sound to come out of my laptop or headphones. My audio interface is an ASIO device and its automatically set as the default output device and wont let me change it. When I actually publish a session as an MP3, I'm able to listen to it through windows media player but I obviously need to be able to hear the audio during editing. Any help is appreciated.

Hi,I am actively recording audio for videos as part of my current job and although I have used Audition for quite a few years now I am still barely above novice level in terms of audio production. I use a RØDE NT-USB, it's what my employer provided. I should note that I am connecting it to a Windows PC via a USB port in my external monitor since the native USB ports on the PC are all USB 3 which seems to cause interference when using this mic. I have no idea if this affects how Windows/Audition sees the mic, I assume not. So using the RØDE NT-USB and Audition on Windows I find myself struggling to get a basic setup working for recording narration for videos that is clean and normalised for e.g. YouTube - which I learned only recently should be -14 to -16 LUFs. I am attaching an image which illustrates how the mic is setup in windows (I have my headphones connected through the 3.5mm jack on the RØDE NT-USB) and a recording comparison I did of my setup vs wh

I'm using zoom.us for my online lectures this semester (I'm a history prof), and I'm using a Zoom H6 as an audio interface and recording my audio locally with Audition to get higher quality sound. After working fine for a couple of weeks, Audition now stops recording in the middle of my lectures, and I can't figure out what's causing it. I've noticed that sometimes sharing my screen can make it stop, but sometimes it doesn't. Sometimes I check to confirm it's recording and then notice it has stopped without me touching the mouse/keyboard/anything. Does anyone know what's causing this? Any help would be much appreciated- thanks! Some additional information:-I'm using a 2020 Macbook Pro w/ 32 gigs of RAM and a 2.0 gHz Quad-core Intel Core i5 processor running MacOS v10.15.6-I have ~135 gigs of free storage-I use three monitors: the built-in 13", a 34" ultrawide LG and a 24" HP-I am running the following apps: zoom.us v5.2.2, Powerpoint v16.41, and Audition v13.0.09 (though I just up

Is there a list somewhere of command line arguments for Adobe apps in general?  Or for Audition specifically? I'd like to suppress "crash recovery" when using Audition in batch from the command line.  When it comes up it expects user input and cancels the script.   Ideally i'd love to launch it without the UI.  Any way for me to look at a list of command line options?

Is it possible to acquire software on my own lifetime license, mainly interested in new / older working programs for Adobe Audition? Lifetime License: Does It Exist?

How can I increase the font size in Adobe Audition CC? I'm using the program on an HP 27 inch LED QHD monitor. The text is too small for me to see without eyestrain and I will have to switch to another DAW if I can't make it larger.

My Project has recently been working great with third party plug ins until last night when I updated Audition. Now Audition crashes during Export>Multitrack>Mixdown. I tried reverting back to earlier verson of Audition that worked great yesterday(pre-update) and it' thes still crashing. I also noticed that the RAM seems to be working much harder today. 

This may be a really stupid question.This is my first serious use of Adobe Audition, I'm mixing sound for a sort film.  Upon opening the Premiere Pro project in Audition, it seems to work, but the color scheme looks almost greyed out, and very different than it looks in tutorials.  Looking at Preferences->Appearance, I don't see anything that makes it look more standard like I see in other adobe apps.  Am I missing something?Thanks!

Hey there,   I'm having a problem with Adobe Audition, since today that little "wheel" where I can change the volume of a track or selection is gone and I can't find any advice of how to get it back.   It might just be a stupid keyboard shortcut that hides/shows it but I couldn't get it back so far.   Also restarting Audition or resetting the workspace didn't help.   Can anyone please help me?

I am having trouble finding a way to arm multiple tracks to record at once. I have about 10 tracks that I need to arm and un arm at the same time, but I can't find a way to do it. Does anyone have an idea of how to do this?

sometimes my file is like this after saving (export)... why is that happaning? (i dont use fade...)

I select the background noise, click on multitrack, and comeback, capture noise print is available but it sounds slightly different. if I play the selected portion it's greyed out again. I have tried copy-paste to increase the selected area. sometimes it works sometimes it does not. I am so frustrated I can never access the noise print option.Kindly help me with this issue. (adobe adution 2022)Thank you!!

Got a noise print for a Track, and then went through my favourite saved process for the clip. Uploaded another clip and I keep getting the 'Noise print is incompatible with this file'. Files are from the same source, and I have tried to open in new projects, multi tracks but now all I get is this message, what have I missed in the process?