Questions

The following has been annoying me for YEARS and I'm finally gonna ask and see if anyone's got a solution! Here's what's going on.... After recording voiceover, I generally save my WAV first to my project folder. However, because I submit auditions as mp3, I then also export the file as an mp3 to the same project folder. But in doing so, I encounter these 2 annoyances: Export file - mp3 - keeps adding _01 suffix.  I don't want a suffix, I just want an mp3 version with the exact same filename.  QUESTION: How can I turn off this suffix being automatically added to my filename?? Export file - mp3 - keeps wanting to save to my last project folder, not the current one where I saved my WAV. So, I always have to click BROWSE and select the 2nd item in the list.  QUESTION: How can I set it so that it will automatically be set to save the mp3 to the same project folder that contains the wav I just saved?

Hi!   I have a small recording studio equipped with a Røde Caster Pro 2 and 4 Shure SM7Bs. I record all mic tracks seperately to post mix in Audition.   Everything is good when recording with only one guest and one host. But with two or three guests + host I get a problem with "spill over" sounds from each microphone.   When I put each microphone on lets say track 1 to 4 in Audiotion and just plays the project, all microphones sound very "canned like".   When I just solo play a single microphone track everything is good. So it's of course because of spill over sound from all microphones when having them all turned on at once.    Instead of using a auto gate which I'm not a big fan of, can I them somehow use Essential Sound or another "auto mix" feature in Audition to lower all microphone tracks which are not playing active dialogue while another microphone track is?   I have also tried to do a sum comp routing all four mic tracks into a bus track and

Does anyone know how to fix this? Audition shut down and now it won't give me my audio back 

Hey all!So I am exporting a client's voice work, and they have a 2 hour session. I am seperating each line into their own tracks, and muting the original session on the first track. When I go to do a multitrack export as a test, the voice clips I am exporting that should only be 10 seconds end up being 2 hours long.I have checked in Mixdown Options that Master is unchecked, and only the tracks I want to export are selected. I know there is nothing else on the timeline of these individual tracks, as I am seperating and dragging the voice clips to different tracks. Not copying/pasting. Yet each time I am getting 10 seconds of dialogue, followed by 2 hours of silence. I only started experiencing this problem when I switched for CS6 to the recent version of CC, and am not sure what else to do. Thank you in advance for your help.

Hi everyone, I'm pretty new to audition and I'm having a problem with linking offline media. I opened audition and my project as usual but this time all media were offline. So I tried to re-link them by right-clicking. Unfortunately it didn't work, because all the original media in my desktop files are greyed out when i try to link them. Does anybody have an idea why this happens and what to to?I'm really distressed right now. I'm using Audobe Audition 2022 build 22.6.0.66 on MacOS Monterey 12.3.1. The files are in my icloud. I really appreciate your help! 

Hi, I've got two questions/issues with my Audio Hardware settings. 1. In both the Default Input and Default Output dropdown menus I've got TWO options for my Yeti Pro mic:- System Default - Microphone (2-Blue USB Audio 2.0)- Microphone (2-Blue USB Audio 2.0)Why are there these two options which are for the same mic?Which one should I select?  Does it matter? 2.  When I first installed Audition (about 2 months ago), my mic sample rate was 48000 Hz, which was reflected in my Audition settings.  Then at some point, possibly (?) after the recent Audition update, I noticed that the sample rate has changed to 44100 Hz.  My mic stopped working (was not recognised as working in Audition), and when I ran Windows sound troubleshooter, it said that the sample rate was "different from the default", and after changing it back to 44100 Hz in the mic settings, it was working again. I want to change it back to 48000 Hz as  that's the recommended sample rate for

In Cool Edit Pro und den ersten Audition-Versionen konnte ich die Punkte einer Wellenform mit der Maus verschieben:   So konnte ich kleinere Artefakte bzw. Spitzen manuell korrigieren. Geht das jetzt gar nicht mehr?

Hi allI started a project in stereo and now realise I should've started a 5.1 project (I'm a noob).Is it possible to convert the project to 5.1 after the fact so that I get the surround mixing UI?Thanks for any helpRegards

Hello, I am using Adobe Audition CS 5.5 64 bit and now suddenly it quit the programm when I try to push play or wehn I try to srcoll the Timeline. I`ve onstalled audition again, and there is the same problem. So how can I solve this problem?

My Macbook recently crashed and when I tried to boot up Adobe Audition it gave me the error 205. I have tried uninstalling and reinstalling but it gave me the same error code.  

I am trying to learn how to batch process in Adobe Audition. The goal is to take a single audio file that has speech at different intervals and create consistent pauses between the speech. So far I've used the Diagnostics tool to mark the different speech phrases and isolate them into separate tracks in Multitrack. Then I added silence to the beginning of each track.  Now all that's left is to sequence each of the tracks together with the leading silence.I couldn't find anyway to sequence them all back onto one track with the silence included.And when I tried to save them all individually using Save All Audio as Batch Process (to bring them back in and copy them all onto one track) the leading audio was clipped off each track. I have spent hours Googling and YouTubing and I'm driving myself crazy.There must be a simple way to accomplish this 🙏 

The recent Windows 10 Update (version 1803) clobbered my Adobe Audition.  I have what I believe are the identical settings for Audition on a Windows 10 version 1709 that works fine.  But with the latest version of Windows 10, when I try to record I get and Input Device Error dialogue box with the message "Undefined external error."Any suggestions for how to solve this?  Has anybody else run into this problem?  I'm running an old version of Audition 1.5 (build 4124.1).

I have a usb microphone that I use to record in Adobe Audition. I've used it before on my old computer the same way and never had a problem with it. I recently got a new computer (same model, just slightly upgraded specs) and when I went to record in Audition, I noticed the audio sounded signifigantly worse than it had on my old pc. I assumed it was a problem with my microphone. Went through a bunch of settings and nothing helped. Then I discovered that if I took an audio file from my file explorer (which sounds fine outside of Audition) and played it in the software, it also sounded horrible. The only thing I've found that can fix this is if I go into the audio hardware settings and set the default input to "no input" instead of my microphone. But that only fixes imported files that already sounded ok. It doesn't fix new files that I record in Audacity. And obviously I can't record without my microphone selected as the input device. So I'm not sure what to do. Any help would be very a

Hi folks, Can someone tell me which file (and bounce/mixdown to track) output scenarios will run through the MIX track, and therefore have the MIX effects applied? For example:1. Multitrack > Mixdown to new track2. track context menu > Export Mixdown3. Multitrack > Bounce to new track4. File > Export > Multitrack mixdown Does all of these run through the MIX track?

Good afternoon everyone, I am trying to be better at maximizing my time for my projects, but the thing that keeps holding me up is editing out all of the dead air that is in my projects. The tutprials I found online don't seem to work and I am not sure why, can you help?Here are some steps I have taken so far and some details of the projects I am working on. - The footage used are primiarily video games with 3 main audio tracks. The game audio, my audio, and combined audio (the third one is for just in case scenarios otherwise it is muted).- I have opened the project in Adobe Audition but I wasn't able to find the sequence even when I named it differently so I can find it easier.- When I do a "edit in audition" it brings up the clip, but I can only see one track at a time within the waveform. Would I need to save it to see a multitrack first before I can try the diagnositc steps or is there a simple way to do this? Any hints are appreciated and thanks in advance. 

Dear Audition Experts,I have a critical need to record and edit cits in Audition and then play them back on a broadcsat type player.But forever (that is, since physical tape cartridges were used) this playback relied on an analog "sub-audible" cue system that utilized START / INTRO / OUTRO / and END marker cues to allert the disc jockey to these maker times on the song with a series of lamps.Now it LOOKS LIKE Audition still does support these markers (and more) in Meta-Data per the screen shot below (version unknown.) But I CANNOT find this pull-down in the current downladed version of Audition (build 23.2.0.68)Does anyone know if tehse Meta-Data markers are still supported and how to create and edit them?Many Thanks  

When I open the Amplitude Statistcs window, I see the Loudness spec set to ITU-R BS.1770-3.Can this be changed? If so, how? Thank you,Bob K.

Hi, I have a few samples of voiceover work that I've done which unfortunately contain 1-2 seconds of silence at the start. I don't have a WAV so I'm wondering if there's a way to trim the 320kbps MP3 inside Audition and re-export/re-save without further compression?  There seems to be a few 3rd party apps that claim to be able to trim Losslessly so I'm looking to see if Audition or Media Encoder can do this and if not, what apps would be recommended?

I am using MacOS with a trackpad.  When I do a horizontal scroll in Audition for audio clean up, it zooms in.  This drives me crazy!  I've tried disabling 'pinch to zoom' function in the trackpad settings, but this does not help.Any suggestions would be greatly appreciated

Hi,Can someone please assist me with this. Audition had been working fine for me consistenly, however within the last week or so, it had crashed repeatedly when doing simple tasks like Merging or applying an effects rack. Each time it does this, when attempting to recover it fails reading 'Warning: X number of clips has no file asset' and my most recent crash ALSO had made no back up files for the past two hours despite being set to do so for every ten minutes. It crashes with no warning, and I'm working on a brand new Macbook Pro.I can't for the life of me figure out why it has turned from a reliable piece of software, to a complete mess within days. It's really making my work impossible and I'm already having to look at alternative software.I have retrieved the Log Files and will post them below along with my System details below. Many thanks.SYSTEM DETAILS:LOG FILES: Process: Adobe Audition 2020 [69405]Path: /Applications/Adobe Audition 2020/Adobe Audition 2020.app/Content

How can I remove camera shutterfrom the audio track in a video clip?

I'm transitioning to Audition from Audacity. In Audacity, you can select two tracks (e.g. Host and Guest for an interview podcast) and delete silence to get rid of any awkward pauses. However, it does not trim the silence if there's audio on the other track. So if the Host asks a question and the Guest pauses for a long time to think of an answer, it'll shorten that on both tracks, but once the Guest starts talking it won't shorten the Host track even though the Host is silent. In Audition, the Effects->Diagnostics panel is grayed out in multitrack mode and it seems like I can only edit one track at a time in Waveform mode, and when I delete silence there it deletes all the parts where the Host is letting the Guest speak. Once I get the panel open, I can use it in multitrack, but it doesn't actually delete the silence, it just removes it from the track and leaves the gap in the timeline so it's effectively still just silence. Is there some way to do this the way Audacity does?

I'm having a problem moving the recording / or muted spots at about 0:00.135. evenly throughout the recording. Maybe I'll give an example then you'll know better what's going on 🙂 There is a fixed element, such as an intro. It repeats in each episode. On the track with the voice clip, there are muted spots (loud breaths, mumbles, etc.). I started to notice that these muted parts are shifted from what I marked (a few days / week / month before). It looks as if the mutes are locked, but the clip with the sound has moved. That's why I suspect so, because it affects the whole track and dozens of places. Always by the same amount shifted. Maybe there is some function that I activate accidentally and unconsciously move it?Maybe some Audition update introduced something that such an offset occurred?The effect is cut off word ends. Has anyone encountered such a situation? How can this be remedied?The situation has occurred several times before, but I suspected

Everytime i use a couple of vst's in the multitrack recording, audition crashes... Is this normal? Running it on windows eleven. Could this be the problem? Intel core i7, 2,5 Ghz, 8 core/16 threads, Asus, 32gig ddr4... Anyone?

Hi, we've been trying to open proyects wich includes .ogg files, but we are unable to open then, what can we do, do we need a plug in?