Questions

So I can see the start and end of songs which amybe quiet, can I increase the height of WFM's? I have track hieghts maxed and don't want to incerase the volumes, but see the quiet bits?

Hello! I am editing a handful of clips in Audition, and a part of my normal workflow includes using the normalize audio action in the "Favorites" drop-down menu, but there are only 4 options visible. I have attached a screen shot of what that is looking like. Any ideas as to what happened to the other options? Thank you for your time! 

Each time I attempt to apply WAVE Central's NS1 plugin to an audio file in Audition, it crashes the program.  I have the latest updates to the plugins.  I have the latest version & updates to Audition.  I have the plugins correctly installed, scanned and enabled in the effects rack.  When I first installed and used them a few months ago, it worked great and then stopped.  I have searched the internet for solutions and found many others who have experienced the same issue, but no formidable solution that can generally apply.  WAVE Central technical support was no help either.  I hope Adobe has a workable solution.  Of course, I can always use DeNoise in Audition but would like the benefit of both.  Can you help?

Hey everyone!I've come across  a tech issue concerning Adobe Audition that maybe someone can help me with. I've exported an audio file in which, at some points, I had left full silence while editing (I'm attaching a screenshot of the multitrack session). However, when analyzing the exported file, there's a bit of noise floor (of around -144db) in the spots in where should be silence. Does anybody know if there's a way to solve this? It would be a life-saver.Thanks!

Just curious if anyone has had any issues or knows of anything I should watch out for when upgrading my Mac OS to Monterey and getting Audition back up and going. I have a bunch of Waves plugins I'll have to update to V 13 I know but other than that.... am I good to go?

1)I wish to record a video track at the same time as two vocal mics and one guitar track. (At the same time) 2)then mess with the effects and levels after,  mabe even add another track or two afterwards 3) using a focurite 8 channel interface   Can this be done ??

Hello Everyone. I noticed Inside Multitrack, Fade Envelope, Gain Envelope and Normalize ( Process) are Grayed-Out.Why you can only work with these effects inside the Waveform only.Thanks

Hello,today I've open Audition and when I use the space bar, or the play button, nothing happen. The cursor doesn't move.I have the last version of audition in Creative Cloud and mac Big sur.This is the first time that this happen, till now no problem.Any hint?

So I want to change my voice to yodas voice.I can't find any youtube tutorial or webpage regarding my problem. Can somebody help me?

Can I be told what that is, please?Thankssteve z 22.5.0.51

Specifics: My friend wants a reel made for his streaming channel and I wanted to edit what clips I've mustered to some really good 80s music (in a fun montage style). There is a moment in the footage I have where he claps several times and my plan is to speed ramp the clapping to sync the clip to the music but I want to replace the audio from the clip and with clapping sound effects I've recorded myself (so it fits the song better and has no background noise) However I want to apply 'gated reverb' to the clapping sounds I've recorded but I don't know how to do it personally and I was wondering if there are any steps-by steps anyone might be able to provide  to help create this effect in Audition. And if not Audition maybe other software in the creative cloud? I have the full subscription so I can use anything on it. Thanks for your help

Hi community, I have searched around for a solution but it seems everyone has the opposite of my problem. The audio is normalized to -0.1 dB in waveform view, but when I bring the files into the multitrack, the audio exceeds 0.0 dB. I have checked my mixer and none of the faders are brought up. Additionally, the clip volume has not been changed. I am not using any presets or effects on the multitrack. From everything I see, the audio should be the same as it is in the waveform view. I have changed my multitrack settings to Left/Right cut (logarithmic) instead of the default -3 dB center. That is the advice for people encountering the opposite of my problem, which is that their mixdowns are quieter than they are in the multitrack view. When I mixdown, the levels stay the same. I have been racking my brain on this for an hour and cannot seem to find a single setting to explain it. I also cannot understand why a multitrack would boost my audio levels by default. Any help wo

Hello, I am starting out in Voice over and am using Audition for my DAW. I have a question I hope you can help me with. I suffer chronic rhinitis so am a heavy breather. I need to reduce the gain on my breaths. This is a time consuming problem. I use iZotope RX 9 and it catches most of my breaths, but to keep it from interfering with words that are breathy (like words ending with f or h) I need to keep the settings pretty light. That means while editing I have to manually process quite a few breaths still.What would be helpful is if I could set up a hotkey that would allow me to select the breath, press the hotkey, and have it lower the gain by -15dB. I would also like to be able to set a hotkey to add .5, 1.0, and 1.5 seconds of silence.Can anyone help me with this? Are either of these possible to do? Thanks! Rusty Jones

Have recorded a VO file of 35 minutes all morning and suddenly find numerous examples of the screen shot attached. has anyone seen this before please?

I've been using adobe audtion for a while now, but recently I've had these weird little boxes appear in to my track when I start editing. I have no idea what these are and why they've appeared, but they are really annoying. I am using a Motu M2 audio interface and a rode procaster mic. I've tried reinstalling audition, but the squares still appear 

I want to adjust the volume of a selection so that it gradually gets louder or softer.One repeating feature of voice files is that people often lower their volume as they complete a sentence. It starts out strong, but then the volume fades. I moved from Goldwave to Audition. Goldwave had a feature called "shape volume" that allowed you to move points on a bar up and down across the length of a selected sound wave. So, you could select 5 seconds of a clip, then move the volume from 1 to 5 across the 5 seconds - so that the sound wave would get progressively louder.  I could then "correct" the voice file so that the person's voice (sound wave) would go from fadeing in volume to steady in volume.Is there a way to do this in Audition? My compression SORT OF corrects for this, but is is global. I am wanting to do this for short selections of 3-10 seconds without changing the rest of the file. 

Hi,I've got a number of users using Audition CS6 on Windows 10. Audition is running the latest patch, V5.0.2.7.From what I've been told, Audition is crashing whilst in use occasionally (about once a week for a couple of the users, others less often), but not always whilst the user is doing the same task. Every time it crashes, the error box that appears mentions the Visual C runtime DLL - MSVCR100.dll. After the crash, Audition recovers the audio or session that was being worked on, so it's more of an inconvenience rather than a loss of work.We don't have any VSTs or external filter files installed - it's just vanilla Audition CS6.We're running the latest version of Visual C runtime from Microsoft (10.0.40219.325) and I'm wondering if this is actually causing an incompatibility with Audition CS6 for some reason.So, I have a couple of questions.1. What version of the Visual C runtime is Audition CS6 actually expecting to use? My theory (based on some other forum posts on here) is that I

Hi AllI am new to AA and am mixing a 8 track 2 hr concert by my Male Voice Choir, I have laid out as a multitrack session but this is unwieldy. How do I cut this into a multi track sub-session for each song, please?

I am receiving this message when trying to open a standard .wav file.   Error: This file is not supported by libsndfile.  Code: 64.  Error in WAV/W64/RF64 file. Malformed 'fmt ' chunk. What do I need to do to fix this issue ASAP?

There are quite a few posts on this board cautioning against undesirable effects when using the Podcast Template but I've yet to see a recent comment about it. Just wondering-- is this Podcast Template still used with a word of caution or has anything been modified about it? Thoughts? Looking for best sounding voice recording settings and I am a novice in audition (also using most recent update) so I imagined a template being much easier and way less complicated.Thanks!

Audition 22.5 won't open after install. Continues to send error message that a .dll file is missing and I need to re-install. I have re-installed, and re-started between three times now.???

Hi,I am running the following setup and if/once I get the latency right then I get clipping issues. Any suggestions on getting the right balance? I've only just bought this laptop and this is the only purpose I'm using it for.Laptop:Asus TUF Gaming F15Intel® Core™ i5-10300H processor (2.5 - 4.6GHz)512GB SSD storage with 16GB RAMNVIDIA® GeForce® GTX 1650 graphicsWindows 11Interface:Focusrite Scarlett 2i2 3rd GenDaw:Latest version of Adobe Audition via the Creative Cloud Desktop AppPlugins:ML Sound Lab Amped RootsPurpose:Recording GuitarImporting drum loops ThanksMatt

Hello dear community, I just can't get it to remove the background music from a sound clip. Can someone help me here? I just want to have the laughter without the music.I have attached the .mp3

I'm trying to get one voice track and one background music track from audition to Character Animator.  When Exporting the mixdown it only exports the voice track and not the music track.