Questions

I cant open Camera Raw anymore. Here's what I already did:-Deinstalled Photoshop and Bridge,-Reinstalled Photoshop to 2020,-Updated to the newest version of Camera Raw 12.2 No success so far. 😞 Still, This error is showing up when I try to open a CR2 (Canon 5d Mark II) in Photoshop.In Bridge there is no error but also there is no Camera Raw starting. Desperately need help, any kind is highly appreciated! Thanks

Hi, I created a camera profile to apply to all my infrared images taken with my Nikon D600. I used to be able to apply this profile to all images taken with that camera automatically. Before uninstalling and installing again (due to an issue with creative cloud) I achieved this through the camera raw settings. Now I go to the ACR settings and to RAW defaults and all the lower part where you should be able to select a camera model is grey. Even if I check "override master setting for specific cameras" everything is unselectable. I run Windows 10, latest update for all Adobe appsThanks!

Hello, just a stupid question from a beginner: What are Camera RAW profiles good for? Are they effecting display of photos in LR-library and development mode only or are they used as a preset for the development work flow? Why should I use e.g. Canon EOS R RAW-profile instead of Adobe standard?Thanks in advance for a quick answer!

Hi, I can't figure out what demosaicing (interpolation) algorythm does Adobe DNG SDK use. On some old forum thread some user says that DNG SDK uses simple bilinear interpolation, but that thread is ten years old. What's with Adobe DNG SDK 1.5? Does it still use bilinear interpolation? If so, is there any way to implement, for example, AHD interpolation? 

I have a problem of not being able to read the labels when I hover over with the mouse.  I am unable to read the hightlighted labels whenI hover over with mouse. The photo above shows problem. I have tried the Preferences menu to no avail. Can anyone help.

I have Lightroom 6.0 (Camera Raw 9.0) on Windows 10 and Lighroom cannot recognize the format in my raw files from Sony Rx1RII camera. What can I do to get Lightroom to read my raw files? Please advise! 

Does camera raw have a shortcut button for the command of Previous Conversion? or how do i make a macro of it? Thanks!

Mac Catalina 10.15.4 Installed Photoshop v 21.1.2 Camera Raw is “Up to date” No interface of Camera Raw is showing.  Imposable to navigate or do any adjustments. (See photos) Please, anyone knows how to solve this problem? Thank you 🙏     {Thread title edited by moderator}

Hi everyone, i´ve read a lot of articles and looked for answers already but somehow i could´nt find any solution how to solve my problem. Camera Raw clearly states that RAW CR2 of this old Canon Body EOS 400D is supported but somehow it converts the RAW CR2 into JPG (Lightroom CC / Lightroom Classic) or TIFF (Photoshop CC) when I import those files. In the photos folder on my mac they are marked as CR2, I even can work with the RAW format with ColorSync app that is provided by IOS. I already looked for new format drivers on the Canon homepage as well, but no luck. Can someone explain why this is not working properly in LR and CS? IOS: macOS Catlina 10.15.4Camera: Canon EOS 400D CR2 RAWLightroom Classic: 9.2.1 releaseCamera Raw: 12.2.1.Photoshop: 21.1.2. release Thank youAlex

Seit ein paar Tagen erscheint der Text: Der Vorgang konnte nicht abgeschlossen werden, wenn ich den Camera Raw Filter im PS öffnen will. Was kann das Problem sein. Es ist alles aktuell laut Pc. Was kann ich noch tun?      {Thread title edited by moderator}

The tool descriptions don't appear in Camera Raw when I hover over each tool. A little yellow box appears but contains no text/description     {Thread title edited by moderator}

Is it possible to open arw files from the sony ar7 iii in lightroom 5?

I am using the latest version 12.2.1 of the Camera RAW Plugin in Photoshop on a iMac. The information behind buttons is showed in a yellow box with white text. So it is impossible to read. How can I change this this setting? (As in Photoshop, a yellow box with black text). See attatched screenmovie. Thnx Rob.

Hey folks,does anyone know, when Camera Raw will support the new EOS R Raw Files?GreetingsNadine

ORF files will not open in lightroom classic raw or photoshop. this has just started any ideas  

Post removed by myself. I made a really stupid mistake.

My work flow: i open select multiple images in ACR for initial sync of lense correction, white balance, image mode and few other. Followedby, i want to open these RAW files in PHOTOSHOP in stacked layers. i want to focus stack those layers.  could not find any way of doing so. Please advisethanks.   

Photographer friends // Need helpI was doing a timelapse over the weekend and for some strange reason half way through the timelapse, it decides to force a 16:9 crop onto the image when I try open it with any Adobe program. Even though when I preview the image in finder it shows it without the crop. I've opened it in Lightroom, Photoshop, Aftereffects and the same thing happens every time. I tried using the crop tool in ACR and that doesn't do anything, I've basically lost the top and bottom of the image which is super annoying.The closest I got was with LR timelapse, but when I did the visual preview it added the crop onto it, arggggg no help.Have a look at the below image URL, the left image shows the normal aspect ratio the photos were shot in and the image on the right has a forced 16:9 crop which I can't find out how to remove. These two photos were taken 10 seconds apart on a remote timer. The camera had not been fiddled with or anything.Anyone have any idea why this happened and

I need help downloading and installing in laightroom 6 the raw camera plugin for a sony rx100viiCan someone help me thanks.

I need help downloading and installing the raw camera plugin for a sony rx100viiCan someone help me thanks.

Quisiera saber porque me aparece esto al querer activar mi camera Raw: " No se ha podido completar el comando Raw de camara por que no se ha encontrado el plugin de RAW de camara de Adobe ", teniendo ya instalado mi camera RAW (v.9.1). Tengo Photoshop Cs6. Hasta intente con camera raw v.10.  De ante mano gracias. I would like to know why I want to activate my Raw camera: "The Raw Camera command could not be completed because the Adobe Camera RAW plugin was not found ", having already installed my RAW camera (v.9.1). I have Photoshop Cs6. Even try camera raw v.10.  Beforehand thank you.

Hola me gustaría saber si han observado que en la ultima actualizacion del plugin, en el menú corrección de lente, ya no aparece la opcón de corrección de perspectiva que permitía corregir: horizontal y  verticalmente, o total. Tanto manual como automaticamente?Lo pregunto porque en el día de hoy me he puesto en contacto con un operador de Adobre y no me ha saido dar una solución, mas allá de decirme que volviera a una versión anterior.Muchas gracias, saludos a todos.

Hello everybody.I uploaded here 2 variants of raw. They're pretty similar, but 1 opens, 2nd - not. In the last version of ACR/LR and almost any other similar software. Reports about software failure, without any additional info and possibility of skipping this window and go further. BUT it opens and processes in RawTheraphee and RawDigger, so that I can conclude that the file itself is not corrupted.  It seems like it can't go through the metadata verification. If so, can you help me? Maybe you should expand permissions in this case or provide it as an options. Because in principle files can be opened and be useable. I have a big pack of such raws. Thought I could find a solution. Tried to upload raws here but it won't upload unopenable variant. Is it really checking right here?

In früheren Versionen von CC haben einige Dinge sehr gut geklappt. Es ist schade, dass zunehmend mit Ergänzungen via Updates festgestellt werden muss, dass gewohnte, einfache Abläufe nicht mehr verwendet werden können. Im CameraRaw-Plugin fehlt nun die Möglichkeit, die Einstellungen für eine Bilddatei als CameraRaw Standard zu definieren, was vor einigen Monaten noch funktionierte. Man kann umständlich via Voreinstellungen irgendwelche vorhandenen "Standards" auswählen, dabei muss ich aber dennoch für jede geöffnete Bildserie die Profil- und Aberrationskorrekturen des verwendeten Objektivs immer wieder erneut aktivieren: Man muss jedemals die Objektivkorrekturen erneut aktivieren. Folgendes Vorgehen wurde im Support an die Hilfe verwiesen, um mein "Nörgeln" zu entschärfen. Via Voreinstellungen folgende Aktionen vornehmen:Erstens kompliziert, macht nicht was man früher konnte, nämlich aus einer eigenen Musterdatei für eine weitere Bildserie einen Standard zu speichern, der erst noc

Why, do the numbers from 1 to 100 turn into 101 to 2020?