Questions

I can't for the life of me understand why Adobe went and changed their profiling. I noticed this on the Canon 5d4 and of course on the R as well.  You can see this too if you look at the test images on Dpreview for each camera. 5d2 RAWs and 5d3 RAWs with default Adobe profiles have much more punch and a please image. 5d4 and R RAWs just look super dull and you have to work much more to bring out the image. Is there ANY way to get the profiling of 5d2/5d3 images to apply to 5d4/R images? Is this even possible? What program is used to build profiles? I know you can do it, but I can't seem to figure it out.

Good evening.Is there a way that i can update specific HSL adjustments, that I made in Adobe Camera Raw, in photoshop CC.  I pushed the reds a little to far and did not notice right away.  I save the files as a .psd.I went into photoshop (with .psd files) and did File-Open-open in Camera Raw, but the adjustments that i had made on the images did not come across.Do I have any hope?Or do i need to start over?Thanks in advance for any advice or help.

i'm using the olympus omd em1 mk2 .. and the RAW ORF files arent supported in the Photoshop CS6 camera RAW program .. and Adobe will not update camera RAW above 9.1 in CS6 .. if i could update camera RAW to version 9.9 i'd be laughing .. or so i believe .. i've updated the firmware on the camera .. and Adobe DNG converter is the latest version .. 11.2.0.135 .. i have photoshop CC .. and can open the RAW ORF files in that program .. but .. my computer struggles with CC .. if i try and use different plug-ins or filters .. especially Nik software .. it can send my cpu usage way up and also my ram .. so using CS6 is my best option at the moment .. i'm running 64bit window7 .. with 16gb of ram .. so this is what happens when i try and use the DNG converter .. when i select a folder with RAW ORF files in it .. the RAW files aren't visible .. its as if they are not there .. someone suggested that i should get an older DNG converter version ... so in the DNG converter software there is an opt

i'm using the olympus omd em1 mk2 .. and the RAW ORF files arent supported in the Photoshop CS6 camera RAW program .. and Adobe will not update camera RAW above 9.1 in CS6 .. if i could update camera RAW to version 9.9 i'd be laughing .. or so i believe .. i've updated the firmware on the camera .. and Adobe DNG converter is the latest version .. 11.2.0.135 .. i have photoshop CC .. and can open the RAW ORF files in that program .. but .. my computer struggles with CC .. if i try and use different plug-ins or filters .. especially Nik software .. it can send my cpu usage way up and also my ram .. so using CS6 is my best option at the moment .. i'm running 64bit window7 .. with 16gb of ram .. so this is what happens when i try and use the DNG converter .. when i select a folder with RAW ORF files in it .. the RAW files aren't visible .. its as if they are not there .. someone suggested that i should get an older DNG converter version ... so in the DNG converter software there is an opt

Hiwe are still using the Adobe CS6 suite e.g. with Bridge CS6 (5.0.2.4 x64) and Camera RAW 9.1.1.461 (Windows 10/64).Installing a newer version of Bridge is useless because we can't export RAW files.But would it be possible to use a newer version of Camera RAW? Or is there no downloadable version only of Camera RAW?ThanksCarlos

I open hunderets of RAW file at the same time with in Photoshop Camera Raw and select all and use AUTO for white balance and rest of the settings like exposure etc. However, I wish I can add +0.3 ev and +200 kelvin for each raw file automatically which each image file already set by "AUTO" value. Could you add overdrive value for sliders when we choose "auto" in camera raw?Thanks in advance.Koray

Ich kann keine RAW in pse10 öffnen obwohl Aktualisierung 11.4 eingespielt ist. Was kann ich tun?Gruss

Would someone please help me troubleshoot why I am not able to open RAW images in the newly purchased and installed Adobe Photoshop Elements 2019 on my iMac?

I have installed a new laptop with Adobe Bridge and Photoshop I learned, as well as camera RAW. From Adobe Bridge and Photoshop programs when I open a camera with RAW, my programs crash. I once removed the programs from the machine, but in spite of repeated function.  Why do programs crash in this new laptop? co. Markku

Ik zie in de jpg file een bolvervorming die niet in de nef file zichtbaar is.De opname is met 18mm gedaan, dus redelijk groothoek.Bij conversie door andere tools is geen bolvervorming te zien.Ik denk dat de ACR niet (of onvoldoende) de lens corrigeert.Ik gebruik een Nikon 3200 en een Nikon 18-105mm lens.Van beide is een bestand te vinden in de programdata map op mijn windows 10 PC.Klopt het dat ACR mijn Nikon lens niet voldoende corrigeert?

The arbitrary ICC-based output color spaces have disappeared from the dropdown list of the “Space” field of the “Color Space” area of the “Workflow Options” window of my Adobe Camera Raw app. A few months ago, they were still appearing as available, as usual. A month or so ago, I noticed that they are no longer appearing; now only the six standard spaces appear (ProPhoto RGB, Adobe RGB, sRGB, etc.). I would like to use some of them for soft proofing. I notice that they are also not available via the “Save Options” window that opens when one clicks the “Save Image” button in the lower left corner of ACR. In that “Save Options” window, the “Color Space” and “Image Sizing” and “Output Sharpening” areas (and their fields) are all grayed out and unusable. The profiles that have gone missing from ACR are still available for soft proofing via Photoshop.Here’s what I’m using: DNG filesAdobe Camera Raw Version 11.2.0.135 (most recent version)Adobe Bridge Version 9.0.2.219 (most recent version)A

habe den DNG Converter installiert. Die Fehlermeldung "der Quellordner enthält keine unterstützten kameraspezifischen Dateien. Habe einen Olympus E-M1 System Kamera. Hat auf den alten Computer immer gut funktioniert.

I am trying to update Elements 10 to accept Canon EOS7DMk2 RAW files. How do I do this

I just purchased a Canon Powershot C5 X. Shot some photos in raw. Have used raw on my EOS 5D for years. I believe I have installed Raw 11.2 and I also installed DNG Converter. What di I need to do so in can open the raw files in CS6 ?

Hello,I use camera raw for printing, and I had the printer/media type profiles loaded in camera raw.Since the update, I am back to the original 4 choices, and even after attempting to reload profile to the printer driver, there are still not there.(in PS its still there)I really need Camera Raw to control Gammut, with my different media types...any ideas?Thanks,Milan

Avec Photoshop Elements 2018 je n'arrive pas à ouvrir les fichiers RAF de mon X-T3 avec Camera Raw, je n'arrive pas non plus installer la version 11.0 recommandée pour les RAF de Fujifilm, comment faire ?

Got an annoying issue when using the filmstrip in Camera Raw to work on selections of raw files.I use PhotoMechanic to make selections then move to edit these in Camera Raw so I can copy and pastesettings on groups of images.That was working fine until recently when I've been finding that Camera Raw will spontaneously open imageswhile I'm still working on them - usually when I'm pasting settings to a small group of images within the largergroup on the filmstrip.This can become very annoying when on a deadline!I'm working on a summer 2018 MacBook Pro running the 10.14 MacOS - both PS and Camera Raware on the latest versions.Originally I thought I was accidentally touching a button on the Mac's touch-bar but I've been very carefulto make sure nothing its being knocked to open the files.Thanks in advance!!Andy.

I have CS6 and recently acquired a Canon 200D camera.   To  use RAW I needed to install the adobe DNG as the camera and program are incompatible .  This downloaded OK and then extracted OK and the installer said all was OK.  BUT, I can't find the program anywhere on my computer.  It doesn't appear in the app list, or in file explorer under the programs folder -- where is it ?????   I'm running windows 10.

Using,CC,2019,Photoshop,&,Bridge.,When,I,upload,photos,from,my,Fuji,X,T-3,camera,,the,raw,files,download,as,thumbnail,icons,and,not,as,thumbnail,images.,There,are,no,problems,with,jpeg,images.,What,can,I,do?    Thank you    Andrew

open DING files in camera RAW 11.2 running win10 64bit with 1809 update on PC with 8gigs RAM and Intel core 2.80GHz. Awful numerous vertical artifacts with no sharpening . I haven't tried a RAW file not converted to DING.Anyone else having problem with enhance detail?

I'm currently testing out the forthcoming Lumix S1R, but the camera does not yet seem to be supported by Adobe. I'm not sure if the company releases this sort of information, but does anyone know when Adobe will offer support for the new cameras? The S1 and S1R are slated for release this month, so presumably it will be sometime before then?

Why won't my computer let me download my pictures from a cd or my phone?

My problem is opening CR3 files from Bridge.  I can open them in Photoshop but not from Bridge.  I receive these messages when I click on images in Bridge..."code execution cannot proceed because manta.dll not found."  and "code execution cannot proceed because icucrnv.dll was not found."

Hey there,does anybody know a way to access the point curve in ACR with a keyboard shortcut?Theres "Ctrl-Alt-Shift T" for the parametric curve but that's it... -,-I neet the shortcut für programming my x-keys keyboardThanks, Chris

Hi,　I am interested to know the process behind camera profiles. A big priority for me is color output and throughout the years I have sometimes based my camera purchases almost entirely on color character. Unfortunately the only brand that seems somewhat consistent with their "look" is Fujifilm. I am a Canon-shooter and noticed that the output can be vastly different depending on sensor, year, model etc. Some have very vivid profiles (like the older canons) whereas newer ones have a more muted look with the same profiles in ACR (like 'Camera Standard' or 'Adobe Standard')　So, is there some documentation to read about this? Or could you explain the process with camera profiling? I once used a Canon 70D and I loved its vivid "look" with the Camera Standard. I've been trying to match my existing models as close as possible with different profile editors but with no real luck. Yesterday I found a DCP tool to decompile a dcp profile, edit it and rename it as a camera model of your choice. S