Questions

DNG Converter (9.8, but earlier also) appears to always load into the converted DNG file one of the custom .dcp profiles available for the camera in the ...\CameraRaw\CameraProfiles directory.  The only way I have found to make it load the default profile (which I assume is Adobe Standard) into the .DNG file is to delete all custom profiles for the camera from the directory.  I need these DNG files for purposes other than LR/ACR.Is there a way to control whether to load a custom .dcp profile and, if so, which one of those available in ...\CameraRaw\CameraProfiles?

This title is a little clearer and hopefully will attract people who work on DNG Converter.DNG Converter (I am using 9.8 but it did this earlier as well) appears to always load into the converted .DNG file one of the custom .dcp profiles available for the camera in the ...\CameraRaw\CameraProfiles directory.  The only way I have found to make it load the default profile (which I assume is Adobe Standard) into the .DNG file is to delete all custom profiles for the camera from that directory.  That's a pain because I then need to put them back in there whenever I do want to use them with ACR.For reference, here is a screenshot of the never-opened, just converted .DNG file as read by exifTool showing my custom .dcp profile in place of Adobe's default (note illuminant, matrix and name):I need these DNG files to be standalone in order to be processed by programs other than LR/ACR.  How can one tell DNG Converter to load default profile information in the converted DNG? 

I recently bought a Lenovo Yoga 900 PC featuring UltraHD screen and reinstalled my Elements 10 software. Everything works fine except that all characters are microscopic, like divided in size by two according to the higher resolution. I could not fine an option to increase size of characters (like doubling the pixels). Is there a clue to solve the issue with Elements 10, or is the issue fixed in Elements 15 (it could be natural as more and more PC feature UltraHD screen)?

I have a single monitor. I use PS Bridge 2017 as my images organizing software.I usually do several clients a day and then in the evenings, I work these files.I shoot everything in RAW.Part of my work flow is to adjust everything in Bridge. Then I click "Tools> Photoshop> Image Processor". I set it and then run it......As a result, Photoshop OPENS on the TOP of my desktop. Images OPEN and CLOSE as PS does the RAW PROCESS.AT THIS POINT, I want to be working on the next set of images in Bridge, HOWEVER I cannot because PS FORCES itself to the TOP as it does the raw conversion.So, I have to WAIT until it is done...the start the process all over again. THUS my question:How To:   Keep PS in the Background during Raw ConversionKirk Voclain

I am unable to open Sony RX100 v RAW files in Photoshop CS6.  The CS6 Camera Raw plug-in is updated to version 9.1.1, and according to Adobe's chart of compatible cameras the  Sony RX100 v is supported.  What am I doing wrong?

Loaded SD Card into iMac and resulting DNGs from Nikon D750 show uniformly tilted (at the same angle).   When I looked at folders with earlier DNGs, all are now tilted - showing empty pixels.   Spent two hours on phone with Adobe with no resolution and only a conclusion that it is an Adobe issue and not a camera or SD issue.   When I load the SD card into my husband's iMac, the images are normal - no tilt.   I can correct with the offset tool by using Command R and selecting photos with same orientation and correcting those.   REAL PAIN.  Any suggestions as Adobe said it escalated and no call back.    Any suggestions on how to correct.   Rep said not to uninstall because he loaded the earlier version and same thing happened. Thanks

I have a new camera that makes RAW files but my computer's only platform is XP series pack 2.I downloaded DNG converter 8.3 which is supposed to be able to run on XP series pack 3.Will it work?  Or is there another DNG converter that run on WIN XP series pack2?Thanks in advance for your ideas.

I'm working on a project where we are using Nikon lenses on Canon (5D mark III) bodies. We managed to come up with a way to put the Lens Model in the EXIF metadata of our DNG files and it works great with Zeiss ZF.2 and other manual lenses but have come up with a problem trying to get Adobe Camera Raw to locate a matching lens profile automatically for a Nikon AF NIKKOR 35mm f/2D. We noticed that Nikon cameras use a Lens ID code number but the code for this lens (66) doesn't work when the shot originated on a Canon body.Is there a way to get ACR to recognize Nikon AF lenses automatically when attached to Canon bodies? Obviously we aren't using the autofocus features or any communications between lens and body. The lens information is being saved via Magic Lantern to an MLV file (Magic Lantern Raw Video) which is then converted into DNG frames that contains the EXIF tags for the lens information.Any hints, tips, or even known bugs to pass along?BTW -- we discovered that the list of supp

Does anyone know why when loaded straight into Photoshop Elements 14 I get chromatic fringes, but when viewed with Microsoft Windows Photo Viewer the same NEF file no fringes? Here's a screen shot of the same NEF zoomed in to hopefully show what I mean, with PSE14 to the right. I'm using a Nikon 7200, latest ACR and PSE updated, thanks in advance 🙂

I'm directed to this link,Camera Raw installer for Adobe Photoshop CC and CS6[Moved from non-technical Forum Lounge to specific Program forum... Mod][Here is the list of all Adobe forums... https://forums.adobe.com/welcome]

Good morning people. I'm having a problem with my acr. I wonder if anyone can help me. The ADJUSTMENT BRUSH tool is not working but has not been created. Anyone have a solution for me? Information: I installed a trial version of Photoshop CC 2017 The acr and 9.8 that already comes with CC 2017 Another important note, even though I uninstalling it and installing again. Thanks.

Very odd issue i cannot figure out why it is happening.I click to open my RW2 files and they auto open up ACR....i edit the photo in there and save it as a preset and close ACR.I can click that same RW2 file it will open up ACR again and i can select that preset and it looks perfect and i can save it and the resulting image is perfect..But....If i open that same RW2 file, then click on open object, it will open in photoshop itself, i then turn the layer into a smart object, select Camera Raw Filter, i select that same filter i created but the image will look different, and i mean a lot different.  I tested to see and save that file and sure enough it is different than using that same filter directly in ACR.I checked and everywhere, both in ACR and in photoshop settings i am viewing and editing as SRGB.  I have tried multitude of tests and the results are the same even with other raw files like DNG files but with very little difference but still there is a difference.final pho

Hello! I've been at this for over an hour and cannot figure out where I am going wrong.I got a new laptop so have had to re-download the camera raw reader; however, no matter what I do, my raw files won't open. I read somewhere that Camera Raw 8.6 is the version I should be downloading, however I can't for the life of me find a download link.Some specifics:I have a Nikon D810I am using CS6.I also read that there is a DNG converter? But I don't want to go with this option. Like I said, I was able to edit photos on my old laptop just fine using CS6 without using the DNG converter.Thank you for your help!

At home I have Photoshop CS6 and corresponding Bridge. I have always used Bridge to open images and do initial edits in Camera Raw. Recently I took a position outside my photography company and they have Photoshop and Bridge CC versions. I am having issues with Camera Raw. I am being asked to edit photos that were taken by others and when I try to open in Camera Raw, the image is black and the outline of the subjects in the photo are pixels, similar to a clipping mask or inverse of an image. Is there a setting incorrect? What is wrong? Please help.

SWEDISH:Hejsan, jag har ett "gammalt" (synd att säga) Adobe Creative Suite 4 där jag behövt ominstallera hela programmet då jag haft problem med Bridge under en längre tid.Vi ominstallering tidigare idag, så kan jag nu inte avläsa RAW-filerna jag har på min dator....Kollar vilken typ av "uppdatering" som programmet innehar och inser att det är 5.0.0.178 vilket jag har förstått är relativt gammalt (kikat en del på Youtube - men blir inte klokare av detta.) Hur gör jag nu? Är loppet kört för min del eller hur går jag tillväga?/En desperat Mimmi-ENGLISH:Have som problems with my Creative Suite 4 (yes, some of you may think it's an oldie) and when I reinstalled the program earlier this day, cause I hade som problems with my Bridge, the PS would'nt start as it did before the reintallation........ it says that my RAW is an 5.0.0.178 and as I belive it's quite old? Could someone help me with this issue of mine?How do I do?Best regards,And desperate Mimmi in Sweden

I have already installed PS cc 2014 ,after I installed PS cc 2017 , camera raw is 9.7,  but camera raw.8bi  in programm files\common files\adobe\plug-ins\CC\file formats  is not changed, I wonder where the ACR 9.7 is installed.  Even if I delete the camera raw.8bi, ACR 9.7 still can work,

I converted a raw photo to DNG.When I want to open it in Photoshop or the Bridge V2015, I get the error that I have to update my Camera Raw.So when I convert a raw photo to dng, there are still some (old) camera setting in the dng?How can I ride off these (camera) settings?

helloon a calibrated pro screen how come i get color differences between PhotoShop and Camera Raw ?see photo attached(i already tried to re-install evereything)thanks

Ive recently installed camera raw 6.7 and its missing a major part of functionality I use everyday, namely CA correction. The auto CA correction in CR 6.7 is worse than useless and I need to revert  to a CR version that allows me to correct CA manually - therefore how do I revert to camera raw ver 6.6 by installing it over ver 6.7 pls?I know this old hat to most PS users but im still on CS5.

Ok, so the way I do my workflow (which I realize now needs fixed), is to import from my camera into DNG's. Then I edit the folder to my liking (all in color) and export into a brand new folder as .jpg's. From there I make the entire folder of edited color photos into Black and White and export as a copy with a new name, so I've got a color and a Black and White version of the photos in the same folder. In my finder window I see the color and the Black and White versions, in their perspective Color and BW, but after I synchronize the folder in LR, it shows all the photos (2 of each photo) in Black and White Only? What is happening? (and no nothing is checked in my import options)

I know it is unorthodox, but I want to get rid of all the dng files I created and replace them with xmp files to go with my original raw (nef) files. Please don't tell me to stick with the dng files, I know what is recommended but I really can't do that...

bonjour je cherche des infos sur les options dispo dans le cadre du vignettage. sous l effet de réduction du voile il y a une option de style avec : l activation des que l on modifie le niveau il y a 3 options priorité tons clairspriorité de la couleuret incrustation de peintureavec a chq fois les même options ( niveau , milieu rondeur etc... )je ne sais pas ce que c est et je ne vois pas  de diff dans les corrections...?ai je manqué qque chose...? merci de vos retours.

Hi. I have a new computer with windows 10, I put the DNG codec (the last version is still for Windows 7). Now I can the my DNG pictures on explorateur, Photos or Bridge, but they are not Ok (fuzzy). I think it's a trouble with the Codec because my Nikon RAW files (NEC) are fine. Do you know how I can make my pictures look nicer on Widows 10? Thank'sJ'ai un nouvel ordinateur sous Windows 10, j'ai installé le dernier Codec DNG (mais qui est assez ancien et indiqué pour Windows 7). Je peux maintenant voir mes photos DNG dans l'esplorateur, le logiciel photo ou Bridge / Camera Raw, mais elles sont de mauvaise qualité à l'écarn, alors que mes photos RAW Nikon (NEF) sont parfaites. Comment puis-je améliorer l'aspect de mes photos DNG sous Windows 10? Merci

Sorry if this is a really dumb question, but I cannot find anywhere on the web the difference between ACR and Bridge.  Is it the same thing?  I'm switching over to ACR/Bridge from LR and would really like to know the difference between the two.Thanks