Questions

When you stop live streaming, is there a way to have the client player present an end of stream or off-line message?Right now when I stop streaming, the client plays the last part of the stream and then just buffers endlessly.

Hi,i wanna to know if we can generating a key associated to every ip clients, with time limit like Wowza server...for more information you can check herehttp://blog.wmspanel.com/2012/05/protecting-wowza-from-re-publishing-re.htmlCan we do the same thing with Flash Media server for Rtmp streaming?

Hello. FMS will restart suddenly. It happens frequently. I do not know the cause. When it is restarted, the following log is output. Do you know information that leads to the cause? Also, do you know the measures? Thank you very much in advance. [Server environment] Red Hat Enterprise Linux Server release 5.8 Flash Media Server 4.5.0 r5012 x64[/var/log/messages]Sep  6 01:13:09 HOST_NAME kernel: fmscore[12532]: segfault at 0000000900000009 rip 0000000000c512c0 rsp 00002aaaac448a00 error 4Sep  6 01:13:09 HOST_NAME kernel: fmscore[23366] general protection rip:afccd5 rsp:2aaaabd9eb40 error:0Sep  6 01:13:20 HOST_NAME Adaptor[20426]: Listener started ( _defaultRoot_ ) : 127.0.0.1:19351 (rtmfp-core)/v4Sep  6 01:13:20 HOST_NAME Adaptor[20426]: Listener started ( _defaultRoot_ ) : LOCAL_IP:19351 (rtmfp-core)/v4Sep  6 01:13:20 HOST_NAME Adaptor[20426]: Listener started ( _defaultRoot_ ) : GLOBAL_IP:19351 (rtmfp-core)/v4Sep  6 01:13:20 HOST_NAME Adaptor[20426]: Publ

Hello everyoneI want to create multi-bitrate player to play VOD and Live stream.Now for switch between each video bitrate I have to find currently bandwidth between AMS server and client player.For get current bytes per second I use netstream info but this not stable to decision for switch between bitrates, also I use netConnection checkBandwidth for get the current bandwidth between client-server and sum this value with current bytes persecond for calculate current bandwidth between them but this values is not stable to decision.Please advise me to fix this problem. Thanks in advance.

Hi all,We have a problem with our Adobe Media Server, those servers record the record the voice and later reproduce the flv file.Although we restart the ams, the service degrades and affect our costumers.Our platform is two standalone servers Adobe Media Server 5.0.3 with a shared nfs volume (servers don't save the same file, so no locks in nfs volume).A shockwave component in a website record the voice, save the file in disk and later play this flv file.Our customers tell us that sometimes the record doesn't work and we've configured a check in cron using amscheck:/opt/adobe/ams/tools/amscheck --host localhost --port 1935 --app OUR_APP --play "test/S02371" --timeout 5  --logfile /opt/adobe/ams/tools/testApp/fmscheck.logIn that log we can see:----- working ------Version 5,0,3,3029#2014-10-15 20:05:01#Software: Adobe Media Server Check 5,0,3,3029#2014-10-15#Fields: date    time        x-event      &nbsp

I am a freelance event videographer in Las Vegas looking to add live streaming and VOD to my services. I cover sporting events like amateur bodybuilding contests, boxing matches, live entertainment and theater events. I believe I can make streaming work in my business, but because I work primarily alone, I need an affordable platform that offers or supports pay-per-view, embedding, privacy protections, and so forth. I have no experience with streaming and am suffering a steep learning curve. I have the Livestream Basic Platform and their Studio software to get started learning. Product works great, but their Enterprise platform at $10,000 a year is inaccessible to me. I have all the equipment I need to shoot events, and live perform switches, but no knowledge of how to connect my equipment to the necessary services for delivering pay-per-view and VOD in a controlled, private and secure environment. Please point me in the right direction to some specific services that I may already be p

Adobe Media Server 5 Professional (All Platforms,Universal English)Legally owned by a US based company.License will be transferred to the new owner >>> http://kb2.adobe.com/cps/152/tn_15281.htmlPrice is negotiable.For more info email:  dwong@commercialtribe.com.Thanks!

Is there any way to only allow a certain IP range to views VODs in a specific application on the server? In main.asc I tried getting the client.ip but it only returns 127.0.0.1 as the address, which I assume is because the video player is hosted on the server itself. Is there any way to get the IP address of the actual user? We want to be able to limit users to viewing certain videos while they are within a certain subnet. Thanks!

I'm having a lot of trouble getting Adobe Media Server 5 on Amazon Web Services working with live dynamic streaming, I've done a of this on Flash Media Server 4.5 and am trying to duplicate what I have done there on AMS since I got an email that FMS 4.5 will be dropped soon.I have tried replicating my own setup from FMS 4.5 and I have also tried using the base install and following Adobe's tutorial. I get the same results in both events.First, the HLS streaming appears to work fine. I've watch it on several iOS devices with no problem.I use StrobeMediaPlayback for HDS streaming and that's where there are problems. The streams usually play fine at first and even transition well, then after a few minutes I start getting a lot of buffering and then video skipping. The longer it goes on, the more it buffers and the larger chucks of video get skipped. Sometimes I also get and error that says "TypeError: Error #1009"I am using FMLE and both it and the server are set to use absolute time.Any

Hi, everyone!  I'm making an installer that is going to set a machine up for use of a piece of software.  Adobe Media Server is one of the software requirements.  I'm wondering if there's any way to automate the installation of it.  I can, of course, open the wizard through a command line, but at that point, the user needs to be there to continue installation.  I'm really looking for more of a "set it and forget it" type of solution.  If anybody knows of any way this is possible, please tell me.  I'm not finding anything online so far.

Adobe Media Server 5 on Amazon Web Services - PricingAdobe Media Server 5 Extended on AWS MarketplaceWhat is the real price for AMS? There is difference seeing the two link above.

I've receive a email from Adobe saying Adobe Media Server in Marketplace now supports:New Generation instances, but the Marketplace webpage is still listing the same instance generations (m1, m2 and c1 but no m3 or c3).  Could you please clarify?Thanks.refs:Adobe Media Server Amazon Machine Image Ids on Amazon MarketplaceAdobe Media Server 5 Extended on AWS Marketplace

Hi,I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol.Currently, my program can communicate with a flash media server correctly.RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server.The server seems to accept them, but a video player cannot playback the stream sending from the server.  The player just says "Loading..."For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data.  Then, I muxed those data into video/audio message and sent to the flash media server.  In this case, the video player connected to the server can playback the stream correctly.I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code.With those situation, I am

Hello,I have a Dell R720xd server with 2 x Intel® Xeon® E5-2690 v2 3.00GHz, 25M Cache, 8.0GT/s QPI, 10 Core with 128 GB of 1866MT/s RAM.OS: cat /etc/*-releaseRed Hat Enterprise Linux Server release 6.5 (Santiago)The default setup of the ram, cache is currently what is implemented.  I have the following proposal of setup and was wondering if I am on the correct track in these proposed changes.Amount of RAM available for AMS (R) = RAM size - RAM used by the OS and non-AMS processesThe RAM available for Adobe Media Server is divided among the number of cores started:Amount of RAM per core (Rc) = Amount of RAM available for AMS (R) / Number of CoresOut of this, some amount of RAM is used up by the core process, and is not available to the file cache:Recommended File Cache Size = Amount of RAM per core (Rc) - RAM used by each core processRAM used by each Adobe Media Server process varies based on load, and there is no exact figure. You can use 512 MB (I am using 1 GB) as a ballpark fig

Hi,      I just want to show current video frames when mouse roll over on seek bar just like Hulu video player. For reference please see below attached snap shot of Hulu video player.          Can you please tell me how can I do this, I am using Flash Media Server content as well as HTTP server content in my video player and using Action Script 3.0Thanks & regards Sunil Kumar

Can you please tell me is it possible to make connection from Android Java application to FMS and stream live video in one or both ways?

I want access by webcam from a web browser and record the video stream to the server.  I'm not sure what Adobe technologies I need for this, and if there is a tutorial / documentation for this. I think I need the Adobe Media Server, but it seems like that is only for Steaming Videos out from the server?  Most of the tutorials mention Adobe Live Media Encoder, but that looks like an installed application whereas I need to do it via a browser.Any help is greatly appreciated!

Hi,We use amazon cloud front and Open Broadcaster to livestream also using jwplayer. Some time we experience internet problem on our local system and encoder lost its connection to server but it just took 1 or 2 second. RTMP stream not effecting by this problem and all clients works fine but mobile client (iphone, ipad) stuck last 10 second before connection lost and playing this 10 second every time when i open stream on my tablet.The only solution that i have find, deleting these folder and restarting server.mnt/application/livepkgr/streamsmnt/application/livepkgr/events/_definst_/liveeventI use this FMS url "rtmp://<server-adress>/livepkgr?adbe-live-event=liveeven"t and Play path/stream key is "kamera5"Url for jw payer is, http://<server-adress>/hls-live/livepkgr/_definst_/kamera5/event.m3u8Also, I figured out today the .m3u8 file not updating after connection lost with new .ts file, it is always same when i download it every time.How can i setup the server to play http

Hi,I've recently taken over an AIR application project from a colleague who has left, and am trying to set up the project for Android-x86 devices. I can build the application fine, but need to add an implementation of my ANE for these apps.Unfortunately it seems the source code for the extension has been misplaced. I have the current ANE and thought that if I unzip it and extract the original jar file used by Android-ARM, I could rebuild the ANE using this, but although the apk builds and recognises there being an x86 implementation in my descriptor now, when the application starts up it does nothing. My ARM devices are now doing nothing too.Is there anything else I should be doing? Or am I barking up the wrong tree and it's really not possible to build an ANE without the java source code?Help!

We are running Adobe Media Server 5.  We have had one disk location for all media files up until now, but we are outgrowing our storage and need to begin having multiple volumes.  We need a way to specify that some files live on another drive.  We are at a college, and we want to have all of our nursing video on one volume by itself to free up disk space.for example, we have always had everything in http:\\domain\vod\nursing or http:\\domain\vod\username.  We need to move http:\\domain\vod\nursing to e:\webroot\vod\nursing, but have everything else continue to work.  It's on the same server.  We have been on the phone for hours with Adobe support and have gotten nowhere.  We have tried adding a new application with the virtual directory set to e:\webroot\vod\nursing, declaring variables in ams.ini, changing the httpd.conf file, etc.  We have not had any luck.  Everything always points back to this document:  http://help.adobe.com/en_US/

Or any component for using RTMPS? For example: Adobe Media Server, Flash Player (on Windows, Mac, etc.)? Please let me know.Thanks.

I encountered an issue with AMS that looks like a bug to me.Previously I had been using FMS 4 with no problem.Here is what happens---1. I connect a publisher to the server. But don't start publishing data.2. I start a recording on the server.3. Five seconds later I start publishing.I then use /opt/adobe/ams/tools/flvcheck -v to look at the FLV. I see a tag:stream-absolute ==> 5This is correct. Since the data didn't start for 5 seconds after I clicked record.I am using <AssumeAbsoluteTime>false</AssumeAbsoluteTime> in this application.This works fine on AMS 4 and AMS 5.---Here is what worked on AMS 4 but now doesn't work on 5:1. I connect a publisher to the server. I start publishing. 2. I stop publishing.3. I start recording on the server.4. Five seconds later I start publishing again.I then use /opt/adobe/ams/tools/flvcheck -v to look at the FLV. I see a tag:stream-absolute ==> 0.001 or stream-absolute ==> 0This isn't correct. Because the published data started 5

Does AMS standard support dynamic RTMP streaming with JW-player and .smil files? See: http://support.jwplayer.com/customer/portal/articles/1430398-dynamic-rtmp-streaming.Is the standard version the best option for a Intranet behind firewalls?Best regards /Andwic

I am using adobe ams(development version) to record video files in mp4 format using rtmp protocol. I am using mp4 as the file extension and as the stream specifier(codec).The videos are saving correctly.When i copy these files on a mobile device(android and iOS) they are not playing.Can somebody tell what I am doing wrong. The rtmp url I am using is rtmp://localhost:1935/mp4:videoname.mp4

With Adobe Media Server 5, we'd like to use the command "AMSCheck" to check the server status, etc., but this command doesn't seem to go through. We tried searching for it using the "find" command, but there was no result.-------------------------------------------------[root@hostname /]# AMSCheck --host hostname-bash: AMSCheck: command not found[root@hostname /]#[root@hostname /]#[root@hostname /]# find / -name *AMSCheck*[root@hostname /]#--------------------------------------------------Can someone tell us what we're doing wrong?