Questions

Would there be an issue of having two licensed versions of Premiere Elements on the same computer (PE 15 & PE 19)?Didn't know if there would be any conflict with the programs.  I am currently running Windows 7.

 hello, I own premiere elements 15 because it allows you to burn blue ray discs and also have premiere elements 18 on the PC;I now bought an upgrade to premiere elements 2020, could I now remove premiere elements 2018 without causing problems with the new premiere elements 2020 software?Thx

I installed Adaboe Primere elements after the trial. the trial version let me create a video at 100mbs. the purchased virsion wont. i am trying to edit video from my phone which shows in the details that to was created at 100 but in adobie it will only write out at 60. i have tried to adjust the settings and checked the box project settings "Maximum bit rate" but when i move the slide bar to 100 it only writes out at 30. If i select 60 it will write out at 60. just not 100. any ideas?

I just recently purchased Premiere Elements 15 and installed it on my laptop and my pc. I just dropped my laptop and it no longer works. When I buy another laptop, would I be able to install it there as a second install or did I lose that one?

Hallo zusammenMeine Tochter hat in Premere Elements 15 einen Film gemacht, der ca. 5 Minuten ist. Wir haben ihn nun exportiert und es speichert immer 9 Minuten 49 Sekunden,die Hälfte des Films ist am Ende schwarz. Es ist weder Audiomaterial noch Videomaterial vorhanden. Mir bleibt momentan nur die Lösung den Film als MP4 nochmals einzufügen und dann zu schneiden, das kann aber doch nicht sein. Jemand eine Ahnung?LG Karingb

I am using a Dell laptop i7 processer Windows 10 and have made a few working videos with the new laptop. I just stack trail camera video clips together for myself and a few friends. Nothing special, no transistions just menu markers.   Last week when I loaded several video clips the audio portions had no sound except every 4 seconds a blip of the sound track can be heard.  The clips play fine with sound when double clicking them as just video files (not in Elements) but only have the problem when loading them into Elements 12. I have reinstalled Elements 12  3 times now and can't see any problems. Any ideas out there?  Elements worked fine for a couple 1 hours videos and now is have an audio problem.   

Hello everyone,I have a question concerning the quality of the exported files in Premiere Elements 19. I have been using Premiere Elements for several months and am generally quite satisfied with this program; it is not too complex to use and it still has some possibilities in terms of video editing. People who want more will probably switch to Premiere Pro. But this package has a different cost.I am less satisfied with the quality of the exported files. But I'm convinced that it's up to me and that a few parameters need to be set correctly in order to achieve a good result. I have read related conversations on this topic within the Adobe community, but have not found the right solution yet. Below or in the appendix, it becomes clear what I mean. I made a drawing in Fusion 360 and made a render of it. The size of the render (or image) in png format is 1920 x 1080 pixels. If I try to make a clip out of this image and export it as mp4 -H.264 file in HD 1080 (or 1920 x 1080), with a frame

Bonjour,La fonctionnalité d'incrustation sur fond vert ne fonctionne pas sur Première element 2020. Avez vous une astuce car je tourne tous mes films sur fond vert Merci 

Hi, i get the error message when playing mp4/mov videos."The selected file cannot be played because the computer does not have the required codec. (Compressor / Decompressor)"This problem is not permanent, sometimes it works and after a restart it does not work again. Videos can always be played with all other programs, be it Quicktime, VLC or Adobe Premiere. Reinstalling didn't help. Programm is Adobe Elements Organizer 2019 with macOS 10.14.5 Mojave. Can anyone help with the error?BRThorsten

I have a project saved in Premiere Elements 13 that works fine.  I updated to 2019 and opened the project.  Now hitting play does nothing.I tried the Hardware Acceleration thing but it was already set.

Lange Zeit habe ich Premiere Elements 11 benutzt und war zufrieden. Irgendwann trat in unregelmäßigen Abständen der Fehler auf, dass importierte Clips in der Vorschau grün waren und nicht gerendert werden konnten. Media Player, VLC, usw., spielten die Clips einwandfrei ab.Da das Programm doch schon etwas betagt war, kaufte ich die neue Version. Aber Überraschung: das neu gekaufte Premiere Elements 2019 zeigt bei diesen Clips das Standbild korrekt. Bei der Wiedergabe aber wird die linke obere Ecke (ca. 1/4 des Bildes) über den kompletten Bildschirm vergrößert.Wenn ich nicht eine komplette Reihe ab dem fehlerhaften Clip neu aufnehmen will, habe ich nur 2 Möglichkeiten gefunden: entweder mit irgendeinem Player abspielen und vom Bildschirm neu aufnehmen, das ist zeitaufwendig und blockiert den PC oder im Moviemaker einladen und rendern. Dies führt jedoch oft zu einem Zeitversatz von bis zu 3 Sekunden auf 1/2Stunde Aufnahme.Ich weiß nicht mehr weiter. Der Fehler tritt immer wieder auf, unab

Premire ElementsとProの違いを教えて下さい。 Versionは2020です。

This is a problem I have with trying to burn DVDs/ Blu-Rays (Premiere Elements 13). When creating menus I drag the text to the appropriate spot on the screen so it is visible (within 'TV safe zone'). However, when I burn the disc, I discovered that the text had been RESET to a spot that left it half-on/half-off the screen. This problem occurs both when I save the project and when I do not. It has ruined many discs. How do I prevent this? Open to ideas.

Hallo welches Premiere soll ich verwenden für einfaches Video schnitt programwelches auch die neuen Gopro unterstützt (go pro max)und einmalige gebühr hat, keine Monatliche gebühr. gruss danke für Info Premiere pro oder elements? 

I have created a text animation and I'd like to copy and paste it several times to do a comparison.  All I want to do is change the number from #1 to #2 to #3 etc.  But each time I change the # in a pasted clip it changes it in the original copied clip.  Is there a way to change the # in the copied clip without it changing the original?  How do you do it?   Thanks for any help you can give me.

I am unable to use the Disc tab to burn directly from elements to the disc.  The error message states'No Burner Detected'.  I have a Dell computer with a BD ROM Drive. Is there an update to fix this problem? If not, would elements be able to recognize an external usb burner drive?    

I used to be able to add media just fine from a Sony cameraor from my hard drive.  Now when I try to, and select a video to add, error message:  File already exists.  Well, I know the file exists on my camera and hard drive, but I want to ADD it to the Premiere Elements Time Line for video editting.  But can't.  Help?

Apres avoir fait un montage vidéo avec la version d'essai de 2019, j'ai acheté la version 2020.Je ne peux voir mon montage sans la bande d'essai. Comment recupérer ma video sans avoir à tout recommencer avec la nouvelle version ? 

Is there a tiny planet plug-in for Premiere Elements 2020. 

ho  archiviato un progetto di premiere elements 12 per ridurre lo spazio sul disco: si tratta di un progetto che era già stato archiviato in precedenza, e dopo il trasporto in un altro computer vi avevo lavorato ( sistema operativo  windows 8.1 professional). Ma tentando poi di aprire il nuovo progetto  xxx_tagliato, windows mi dice che l'elemento non è disponibile, verificare il percorso e riprovare. Risulta quindi impossibile lavorare sul nuovo progetto archiviato. Come mai si genera questo errore? Non è possibile archiviare nuovamente un progetto già archiviato, con l'opzione di salvare solo le risorse utilizzate, oppure c'è qualche altro motivo? e come risolvere la necessità di archiviarlo nuovamente?Sul computer di provenienza del progetto originario c'è windows 10

Is there an issue with the built in youtube uploader in Premiere Elements 2020?  When I click upload to youtube, I just get a grey screen where my login information should be.  Workaround is to export and upload manually to youtube, but I'm not certain what settings the program uses for "youtube export" to get it in a smaller file size? Thanks

Hi,I have a Win10 system with the HEVC codec installed but Premiere Elements doesn't open MOV files filmed with an iPhone XR.Win10 plays correctly the files but I can't manage in making Premiere Elements (2019 version) doing it.I have already deleted the cache... Could you help me? Thank you,Iacopo.

I’m trying to record narration and I receive and it will not record. When I hit the record button, I receive a “failed to change setting” notice. The instructions continue to say to go to preferences, audio hardware, ASIO settings to correct input, but it will not do so.Any recommendations

One day I opened up Premiere Elements 14 and the tab for Style for titles is blank. I have restarted the program, deleted the working set as described in a previous post, yet i still have a blank Style tab. Support told me I could be provided with a download link here?? Please help.. other troubleshooting has not worked for me.