Questions

Hallo und guten Tag,kann ich ein Projekt, dass ich mit der Testversion erstellt habe, nach dem Kauf ohne Einschränkung benutzen oder muss ich dieses Projekt neu erstellen?Gruß Manfred

Hi, I have just bought a brand new laptop, 16GB RAM, Geforce GTX video card with 4GB Memory, intel i7, 256 GB SSD drive but every time I start up adobe premiere elements 2018 it never loads the video project and crashes within a minute or so of starting up. The clips are in the correct folders and everything is in the right place. All the while the CPU is running at 100% and the fans are going crazy, like the laptop is ready to take off. Something is definitely wrong with Elements 2018, my specs are at least double what your recommended system requirements are and still I cannot load in a saved project to continue editing.

Hi,Can premiere elements 2019 import the following resolutions:1. 1920 x 1080 (30fps),2. 1920 x 1080 (60fps),3. 1280 x 720 (60fps),4. 720 x 480 (60fps).

Hi AllI have tried to contact Adobe but it is impossible.  Web site just keeps sending me round and round and round, so hoping one of you can help.I have just installed and updated PE 13.  Every time I try to open the prog.  I get a notice telling me there is no disc in Drive E.  Surely this is a fault ?  Also when I do insert the disc and clocik continue the notice closes and immediatly opens up again with the same error message.Any idea how I can fix this nightmare please?Kind regardsPhillip

Hey, I want to render my project in more than 30 fps. Is there any solution for my problem? The best render setting was at 1080p at 30 fps. Thanks.

I have finished my first project (10 minute video).  I am trying to burn it to DVD, but Elements says it can not find a DVD burner, yet this computer DOES have a DVD burner.  Any suggestion?

Hallo,ich habe im gesamten Projekt unbewusst ein Einstellung vorgenommen, so dass bei jedem im Schnittfester eingefügten Clip die Video- und die Audiospur grundsätzlich nicht mehr gekoppelt sind. Die Wirkung ist die, als hätte ich grundsätzlich "Verknüpfung aufheben" eingestellt.Ich muss diese Einstellung unbedingt wieder zurücknehmen, denn so ist ein Schnitt unmöglich.Kann mir jemand helfen?Danke im VorausMichael

Last week I just upgraded from Premiere Elements 10 to Premiere Elements 2019.  I have clips downloaded from video camera when still working with Version 10 and when previewed they are fine, with video and audio intact.  As soon as I bring them into Organizer, the audio vanishes.  Video is fine.  Any ideas? 

Constantly I am having a problem with viewing the video and pictures in a project. I reopened a project I was working on. However when I opened the project I can't view the project. when I press play the screen stays the same but I can hear the music. I have to restart my computer to see the project. I tried closing Premiere and opening it again however for some reason once I close the program it does not allow me to open it again. Any Tips or Ideas on how to resolve my problem?Computer SpecsWindows 10Processor 17-8750H CPU @2.20Ram 16.0GBGTX 1070GTX 1070

Hi all, the big chap in red has been and gone and left me a new pc, a gopro hero and premiere elements2019  (lovely bloke that Santa Claus chap).  I'm a total newbie to video recording and editing.  The whole package is to make some videos in my workshop, tool reviews, builds, hints and tips etc for IG, FB and Youtube.I already have and am fairly proficient with Photoshop Elements13, I don't see the need to upgrade as it does everything I need it do, which leads me to my question....Can I use photoshop elements13 as the photo editor within premiere elements.  When I select the photo editor it prompts me to install from disc and select free trial, no option to add an existing version.Or am I going to have to upgrade to photoshop elements 2019 so that I can use the full suite of services within premiere elements 2019.Hope all that makes senseThanks in advanceGraham

I have been running Premiere Elements 14 since August 2016 (replacing v. 11). For several days I have been bothered by a pop up ad asking me to try a trial of 14 which I already own. These pop ups appeared each time I went in  and I could not get them to stop.Yesterday I was working on edits to a current project and suddenly the "trial version" band appeared across the image! So I ask if anyone can explain why this happened to a version I own and what can I do to get ride of it?Thanks and a Happy New year to all!

I dusted off a very old desktop PC with Premiere Elements 3.0 for the purpose of capturing some old VHS tapes. I know, ancient stuff, but it should work for this, right?By using a SCART adapter I am able to capture the VHS image through the composite input on the PC (s-vhs turned out in B/W)So far so good. I am also able to transfer sound to the PC (using 2x phono to AUX) which in turn I can play through PC speakers. The issue now is how to capture the sound in Premiere Elements. Preferably simultaneously with the picture The picture and sound must be fetched from two different channels if you know what I mean...I can't find any menu item for this. Am I missing something?

I am new with Adobe Premiere Elements and have created a short video with the included built-in music score "The Mole". The first part (20 sec) of the music score really fits the video. However, when I cut the last part of the music score (to fit the video length) the music score totally changes. I read on the forums and understand this is a remix-function. I have tried to switch off the remix function by changing the Audio Preferences Remix Options from Remix to Trim. However the result is the same - the music score is remixed. I also read somewhere that I can hold down the Alt-key while shortening (by dragging) a music score, but that does also not seem to make a difference. Can anyone help me solve (or better understand) this?Thanks!I am using Adobe Premiere Elements 2019 - Version 17.0 (20180830.daily.1636760) on Windows 10 Pro 64-bit

I only get the audio portion when I try to load a 4k file into Elements.  I can not change the preference to higher than 1920   x 1080  and yet you can save in 4k

I am working with a 2019 Version of Elements that I just downloaded on my MacBook Pro. Elements works without any glitches until I add a text frame. It allowed me to add one text frame, but every time I have tried to add a second frame to the program, it gives me the "busy" wheel spin - and stays there. My computer is NOT freezing because I can open other programs at the bottom of the screen, but Elements requires me to restart my computer by holding down the power button and essentially crashing the entire computer. Without this, I have no way of closing, saving, or doing anything with Elements. When I pull up the program again, it has deleted the project until my last save. I have rebuilt various portions of today's video four times today and I am working on a deadline. I do video editing with iMovie without issues, and do not have playback or speed issues other than when I add text. Anyone know what is going on or having the same issues? I bought this software CD three days ago and

Where do titles listed in Project Assets, reside in my pc? Premiere Elements 2019, Win10 Home. Tks.

When I import AVCHD files into premiere elements 15 the audio is not working/importing. Any idea how to troubleshoot this? Have used the software without problems before so not sure why it isn't working now but have tried a number of times and getting the same result/

Ok Technical questions you will need to answer my question 2018 version running on Windows 10. Here is my question. I resize an image in photoshop and when I import it to Premiere, rather than having a smaller image it occupies the full screen in lower resolution. I would like to import the image(s) as a tiny picture on a large background image. Because I am doing stop motion with 1000's if individual images, resizing each image individually using click and drag is 1) exceedingly time consuming and 2) not very consistent. Any thoughts would be great thanks!

When I put something from Bandicam or the Windows 10 Xbox recorder into Premiere Elements, the audio almost always eventually separates its sync with the video by seconds.I think this has to do with framerate. Is there a way around it?

I have a mac desktop and can't figure out why Pr Elelments contiunes to crash over and over. I just purchased the software but becoming very fustrated with not being able to dive into the workings of the software due to the frequent crash eposides. Anyone with insight on how to solve this problems I would really appreciate it. Thank you. Tried various forums and reaching out to Adobe customer service but haven't recieved a response.

When I use Time Remap to slow or speed up my video the audio always is messed up.  What is the simplest way to keep it matching the video whether I slow or speed it up.Thanks in Advance.Chad

I think that I am going crazy. I have a lower third that I created in AE that I am trying to merge into a green screen video. One of them is showing up correctly, but the others aren't and I am not sure why.  On Video 1, I have a moving background, video two is my green screen, and video 3 has my lower third. I have also used a Motion Title just to see if they were all working. The motion title is, but the lower third (black background) is simply blacking out the screen and showing only the lower third.  Any ideas?Thanks,Drew

I use Premiere Elements 12.1 on an iMac running High Sierra 10.13.  When I use Freeze Frame and export a photo, it has a distorted look.  It seems as though the image is "squeezed" together.  It looks fine if I include it in my project, but exporting it for use in Photoshop Elements for example has a distorted look.  Any suggestions would be appreciated.  Thanks.Rick

I can easily add beginning text.... or even add text in mid or end-   I am, however, having difficulty figuring out how to add multiple text blocks at different time line point.   For example:  I have a 5 minute videos.  Intro text with a few lines is established.  1 minute in I would like to add a new block of texts.   at 3 minutes in a third new block-  etc.   Is there a way to do this in all one edit?  or do I have to import the same clip 5 times in order to obtain the 5 different text locations?

I have premiere elements 15 for video editing. when opened, this is always in NTSC 29.97. I live in Belgium and here is PAL. I always have to open a new project and then change it to PAL. Can not this happen automatically if I open elements that suddenly appear in PAL? Txs